Posted by leetiran
@lpachuong
Yesterday was Moon Festival. I really miss my family and I haven't eaten Moon Cake for 2 years
Last night, I just stayed at home but I had a chance to take some pictures of the moon from UK 
It was 5 degree C so my hand was shaking and freezing. To my surprise, the moon is white whereas it is yellow if you watch it in my country. I dont know why. 
您是中国人吧
[ This Message was edited by: leetiran on 2007-09-28 03:34 ]
Posted by leetiran
@Raiderski on 6.5 & 6.6
sometime when i take picture with EM on, the ISO is 100, while with ENM on, it may be 125,160 or 200. And sometime when i take picture in normal mode, the iso is 100, while with EM on, the iso may be 125 or 160.
Is there somthing wrong?
EM on ISO is 100, Shutter speed is 1/2s
ENM on ISO is 160, shutter speed is 1/4s
[ This Message was edited by: leetiran on 2007-09-29 04:05 ]
Posted by Sombra
Raiderski 6.5 and 6.6 with EM or ENM ON aways take pictures with ISO100 in my phone.
Posted by terminator17
pics frm w810i,A4A_8.4
Posted by eXoR`
wjats the difference between 89PCT and 94PCT (A4A 8.4)
Posted by sxa
On 2007-09-28 04:32:50, leetiran wrote:
@lpachuong
Yesterday was Moon Festival. I really miss my family and I haven't eaten Moon Cake for 2 years
Last night, I just stayed at home but I had a chance to take some pictures of the moon from UK It was 5 degree C so my hand was shaking and freezing. To my surprise, the moon is white whereas it is yellow if you watch it in my country. I dont know why.
您是中国人吧
[ This Message was edited by: leetiran on 2007-09-28 03:34 ]
no!他是越南人，一个很聪明的人！
Posted by heiyei
@ALL
As everyone keeps wondering which firm would best suit and which will produce best results...here is my conclusion...
k750 R1CA021 - BEST COLOUR.VERY GOOD FOCUS.
k750 R1DB001 - BEST SHARPNESS.HIGH CONTRAST.
w800 R1BC002 - LOW DISTORTION.
so go ahead and choose according to your taste...i was using R1CA021 2years back and then w800 R1BC002 and today once again R1CA021 cause i find it the best...so take your time click a few pictures and decide!!!
Posted by DarKMaGiCiaN
On 2007-09-28 20:05:22, heiyei wrote:
@ALL
As everyone keeps wondering which firm would best suit and which will produce best results...here is my conclusion...
k750 R1CA021 - BEST COLOUR.VERY GOOD FOCUS.
k750 R1DB001 - BEST SHARPNESS.HIGH CONTRAST.
w800 R1BC002 - LOW DISTORTION.
so go ahead and choose according to your taste...i was using R1CA021 2years back and then w800 R1BC002 and today once again R1CA021 cause i find it the best...so take your time click a few pictures and decide!!!
I agree with you
I used to use R1CA021 but las week I changed to R1DB001 I liked the pic with this FW but by time I missed R1CA021 I dont know why but I found it more stable. and less noise ( the red lines )
I was browsing all the pics I took by my K750i I found that the best shots was from R1BC002
Posted by leetiran
On 2007-09-28 14:33:14, sxa wrote:
no!他是越南人，一个很聪明的人！
原来越南也有中秋节啊！
Posted by leetiran
On 2007-09-28 06:03:47, Sombra wrote:
Raiderski 6.5 and 6.6 with EM or ENM ON aways take pictures with ISO100 in my phone.
Are you sure? In the same condition?
If it is very dark, with ENM on, the iso is always 100. But if it is not dark, with EM on the iso is 100, while with ENM on, the iso may be 125 or 160 in my phone using Raiderski 6.5 and 6.6.
But in the same condition, when I use Sarmad 5.8, they are all 100.
[ This Message was edited by: leetiran on 2007-09-29 03:54 ]
Posted by strong
On 2007-09-28 20:05:22, heiyei wrote:
@ALL
As everyone keeps wondering which firm would best suit and which will produce best results...here is my conclusion...
k750 R1CA021 - BEST COLOUR.VERY GOOD FOCUS.
k750 R1DB001 - BEST SHARPNESS.HIGH CONTRAST.
w800 R1BC002 - LOW DISTORTION.
so go ahead and choose according to your taste...i was using R1CA021 2years back and then w800 R1BC002 and today once again R1CA021 cause i find it the best...so take your time click a few pictures and decide!!!
I agree as I said k750 is for fhoto and w800 is for music
I will try k750 R1CA021 couse I found all patches where I need and lets see
Posted by Milu
Yes. k750i is for photos, and w800 is for music, but i cant agree with u that r1bd001 isnt best for making photos
i means that R1CA021 R1BC002 are worst than R1BD001. I know it because i'll chcek that software befor i'll change FW to r1bd001...
Posted by Victor369
Perfect !!!
Posted by DarKMaGiCiaN
TEST 3 Driver : http://www.sendspace.com/file/z3atge
User Guide:
------------------------------------------------
first layer of menus(marco off)
EV-2.0=Scene (1.0 -1.9) 1.0 is Default AutoExposure (1.1Portrait 1.2Landscape 1.3Twilight Portrait 1.4Twilight Landscape 1.5Sports 1.6Beach/Snow 1.7Document
EV-1.7=Contrast (1.1 -2.7)
EV-1.3=JPEG_LEVEL (1.0 -4.0) 34% - 94% step 2
EV-1.0=Manual Shutter Speed (1.0 -4.0) 1.0 is AUTO Day(1/5000 - 1/6) Night(1/5 - unknow)
EV-0.7=ISO (1.0 -2.3) 1.0 is AUTO
EV-0.3=linear zoom(1.0-4.0)(1X to 16X)
EV 0.0=original EV (1.0 -3.5)(can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)(support zoom)
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Spot (1.0 -1.7)1.0 is Default, 1.1 SPOT, Others unknow
EV+1.7=CC(green to red) (1.0-4.0),(00~7F)green (ff~80)red
EV+2.0=CC(yellow to blue) (1.0-4.0),(00~7F)yellow (ff~80)blue
second layer of menus(marco on)
EV-2.0=Brightness (1.0 -2.5)
EV-1.7=Contrast (1.1 -2.7)
EV-1.3=Sharpening (1.1 -2.7)
EV-1.0=Hue(1.1-4.0)
EV-0.7=Saturation(1.1-4.0)
EV-0.3=Focus setting(1.0-1.5)(1.0 marco mode 1.1 normal mode 1.2 full range 1.3 Fast mode 1.4 Fast mode and full range 1.5 Macro mode)default 1.0
EV 0.0=original EV (1.0 -3.5)(can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)(support zoom)
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Spot (1.0 -1.7)1.0 is Default, 1.1 SPOT, Others unknow
EV+1.7=mirroring(1.0 to 1.3)(1.0Horizontal mirroring 1.1Horizontal mirroring 1.2Vertical mirroring 1.3Vertical mirroring)
EV+2.0=SlowShutter (1.0 -4.0) 1/20' to 2' (can be changed with ISO together)
TEST 3 I hope you like it ( CID49 users tell me about the pics if it is Ok or should I add Color Correction)
Posted by Sombra
On 2007-09-29 04:45:46, leetiran wrote:
On 2007-09-28 06:03:47, Sombra wrote:
Raiderski 6.5 and 6.6 with EM or ENM ON aways take pictures with ISO100 in my phone.
Are you sure? In the same condition?
If it is very dark, with ENM on, the iso is always 100. But if it is not dark, with EM on the iso is 100, while with ENM on, the iso may be 125 or 160 in my phone using Raiderski 6.5 and 6.6.
But in the same condition, when I use Sarmad 5.8, they are all 100.
[ This Message was edited by: leetiran on 2007-09-29 03:54 ]
Based on your observation, i make new tests in various light conditions, and really you have reason, in one photo the ISO is 200 (when autofocus don't work properlly).
Sorry for my poor english.
Posted by tommymar
Darkmagician, change JPEG does not work. Check it out.
The quality is the same as the old 1
[ This Message was edited by: tommymar on 2007-09-29 14:57 ]
Posted by lpachuong
Hello everyone. How are you doing? I'm half-left now (because I'm not allright
)
Sarmad: nice to see you are back.
Darkmagician:
You have a nice driver
Master, how about you?
leetiran: Yes, we have Moon Festival once a year as in China. I think every Asian countries has this special day.
sxa: Thank you for your comments. However, I am not like what you say
I just try my best as I can.
Terminator: your pictures are nice.
I cant answer yours question in Chinese but I can understand you as I use google translator
A4A-Users: A4A-8.5 Test of compression
http://www.mediafire.com/?ehhybudxn9t
This is a new version with some changes that I have been playing during this week.
There are 3 versions in this package:
- For CID36
- For k750 cid49: old sharpness 00 and new sharpness $f
- New compression for these two phones: 98% of compression
I have tested with R1DB001 and w800i r1bc002. On r1bd001, it takes pictures at any situation without crash, however, if you turn off the camera and turn it on back after few hours, the phone cant save any pictures. R1bc002 is better and it is more stable than r1bd001. If you have r1ca001 please check it and tell me the result.
W810i will have a new driver with an update for compression as well
The code for the new compression can be seen in my drivers but here is the main thing:
cam_data_offset=2;
cam_vf_sync=7;
cam_ss_sync=5;
cam_ss_retries=9;
You may encounter the crash problem at the first shot after install the new driver.
Hope you enjoy it and i'm looking forward to ur comments.
Have a nice weekend. Yours sincerely.
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-09-29 16:51 ]
Posted by heiyei
@ any good soul
iam currently unable to download 8.5 from mediafire....so i hope you get it..
Posted by don_gori
lpachuong great work man your new driver makes magnificent pics
I'm with K750 R1DB001 firmware and there are no crashes so far
Тomorrow I'll show you some pics with your new driver and I also test it on K750 R1CA021 firmware
Best wishes for all you and see you tomorrow
Posted by terminator17
On 2007-09-29 17:00:20, lpachuong wrote:
Hello everyone. How are you doing? I'm half-left now (because I'm not allright
)
Sarmad: nice to see you are back.
Darkmagician:
You have a nice driver
Master, how about you?
leetiran: Yes, we have Moon Festival once a year as in China. I think every Asian countries has this special day.
sxa: Thank you for your comments. However, I am not like what you say
I just try my best as I can.
Terminator: your pictures are nice.
I cant answer yours question in Chinese but I can understand you as I use google translator
A4A-Users: A4A-8.5 Test of compression
http://www.mediafire.com/?ehhybudxn9t
This is a new version with some changes that I have been playing during this week.
There are 3 versions in this package:
- For CID36
- For k750 cid49: old sharpness 00 and new sharpness $f
- New compression for these two phones: 98% of compression
I have tested with R1DB001 and w800i r1bc002. On r1bd001, it takes pictures at any situation without crash, however, if you turn off the camera and turn it on back after few hours, the phone cant save any pictures. R1bc002 is better and it is more stable than r1bd001. If you have r1ca001 please check it and tell me the result.
W810i will have a new driver with an update for compression as well
The code for the new compression can be seen in my drivers but here is the main thing:
cam_data_offset=2;
cam_vf_sync=7;
cam_ss_sync=5;
cam_ss_retries=9;
You may encounter the crash problem at the first shot after install the new driver.
Hope you enjoy it and i'm looking forward to ur comments.
Have a nice weekend. Yours sincerely.
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-09-29 16:51 ]
hey how r u/??good to see u again..
yeah will wait for the driver..thnx
Posted by terminator17
On 2007-09-26 14:19:04, Raiderski wrote:
terminator17
i made my config as Em on in fine quality..
when i did so,sharpneess level reduced,i generally getting blurred images at close range..
everytime when EM is used sharpness will hurt because of:
1. slower shutter speed (longer exposition time)
2. even tiny hands move (what is obvious)
3. always enabled image filtering (to eliminate big chroma/luma noise)
so wht is d solution u suggest..shudnt i use Em on in fine..with EM off indoor pics..i do get noise also..thats y i prefer EM on..as no noise is thr....
i dont get any blurrness with other driver evn with EM on..and i tell u m a good photographer
Posted by strong
OK firmware changed for test to K750 R1CA021 and I think is very nice cause my fhone is cid 36
samples SuperFunction v5.5
[img=http://img259.imageshack.us/img259/3096/dsc00040ed9.th.jpg]
[img=http://img259.imageshack.us/img259/4921/dsc00039wr3.th.jpg]
[img=http://img259.imageshack.us/img259/2320/dsc00037uk7.th.jpg]
[img=http://img259.imageshack.us/img259/576/dsc00031em9.th.jpg]
[ This Message was edited by: strong on 2007-09-29 19:07 ]
Posted by metallica1
Photos With Raiderski 6.6
Posted by lpachuong
It is a nice picture
Strong, so your phone is CID36 or CID49
Posted by tommymar
Nice driver, lpachuong. Haven't got crash so far. I will carry out some more tests.
This is the best picture I have ever had about keyboard:
ISO 100, 576KB Exposure 0.75 All auto.
Posted by wickedsick
On 2007-09-29 19:58:56, strong wrote:
OK firmware changed for test to K750 R1CA021 and I think is very nice cause my fhone is cid 36
samples SuperFunction v5.5
Strong, I thought you have CID49. That why you have nicer pictures on your phone than cid49. You let me down...
Posted by strong
@lpachuong
@wickedsick
As I wrote I have cid 36 I will test my new firm for few days and then I will
decide what is better for me
Posted by d8ctor46
darkmagician can you upload your test 3 on mediafire?
sendspace has got problem
thx
@lpachuong now i'm using your 8.4
i'll try your 8.5
very good work
Posted by heiyei
@ Lpachuong
hey brother ... here are some pics i clicked( c l i ...) with your 8.4 ...along with R1CA021 and R1BC002 , unfortunately 8.5 is very unstable with R1CA021 so what can i do .... change the compression ... well which line???
Posted by DarKMaGiCiaN
@tommymar
I'll look at it ^_^
@lpachuong
hehee I know that you'll like the pic of the cat that metallica1 post ^_*
@d8ctor46
uploaded and here is the link: http://www.mediafire.com/?4mbm29pebhm
^_^
Posted by lengstreet
Hi All FRIEND!!!
My New Camdriver for CID49 phone isnt Supermode.
it Easy to use fast save and good colors.
Try it for FUN
Special Thank: Raider, lpachuong.
==========================
D/L LengStreet v5.1 ---> http://www.mediafire.com/?3mxwvd1mwih
==========================
Sample Pics from my camdrive
[ This Message was edited by: lengstreet on 2007-09-30 10:20 ]
Posted by lpachuong
A4A-8.5 Test 2
http://www.mediafire.com/?6ke5mbyun2t
Hello everyone. How are you today? I am sorry for my late replies because my computer was down. However, I manage to create new drivers for k750i and w810i.
This time, you will see the quality on both k750i and w810i are improved. However, compression of k750i is lowered to 94% and w810i is increased to 98%. W810i now can create better compression but it will save quicker. Hope you all enjoy and I'm waiting for your new comments.
Best wishes.
Posted by Milu
Ipachuong take it easy. i have no time to put 8.5 to my phone and there is 8.5 test 2...
i have some work with that
http://forum.sek750i.pl/viewtopic.php?t=3574 in polish language
Posted by don_gori
Hello everyone
today I made one test between A4A-8.5 and Raiderski 6.6 camdrivers and between K750 R1CA021 and K750 R1DB001 firmwares
Here http://wellcomehome.hit.bg/Test.rar
Posted by billcat
@ lengstreet
can you post some distant shots also ..................
Posted by billcat
@ lengstreet
how can i zoom with macro on and take a picture ............
Posted by lpachuong
SOS. I wanted to put R1ca021 into my phone but my phone doesn't allow me to use far nor updating patches by using setool2lt nor uploading file by xs++. If you have r1ca021 please teach me what to do. Thank you.
Posted by d8ctor46
lpachuong try GFLASH to apply vkp
gflash is the free tool for flashing k750/w800 only
_________________
please for your photo by sony indicate
what your pics is made by,so we can know all kind of camera module.thx
[ This Message was edited by: d8ctor46 on 2007-09-30 20:33 ]
Posted by lpachuong
Thank you d8ctor46. I can patch the phone now. But xs++ still can't finish uploading the files to FS. However, it is alright now. I will test with this firmware. So far I can say its compression is more stable than the other firmware. I know maybe I am stupid but I still would like to improve the quality of the pictures and the only problem left is about compression.
Btw, I will go to bed early tonight so see you later and good night.
Posted by Raiderski
leetiran & Sombra
EM/ENM is simple method for simple guesstimate of "low" ISO value. nobody said that EM/ENM will always give ISO100
so, nothing strange...
don_gori
but... what CID versions? this is very important and you forget to write about this. i think that you used two various CID phones: 49 with 6.6, and 36 with 8.5, i'll try to explain my suspicion:
1. quality difference between two firmwares and one CID can not be so "spectacular" - this is visible on every pair of pictures
2. dark yellow color cast on every picture from phone with CID49/6.6 - this is typical for CID49 phones
3. sharpness... doesn't exist on pictures from CID49/6.6/R1DB001, this is a total opposite for shots from CID36/6.6/R1BD001... i know, two various firmwares but look above at point 1
in my opinion you omited CIDs difference
_________________
W800 CID36 R1BD001
www.tinyurl.com/2c3quo (gallery)
www.tinyurl.com/ysc2wm (driver + config tool)
[ This Message was edited by: Raiderski on 2007-09-30 22:24 ]
Posted by don_gori
Raiderski sorry man
Two phones are CID49
Posted by jonaugust_69
difference 6.6 with 8.5
6.6
BRIGHTNESS= 00;
CONTRAST= 00;
8.5
INIT= #CMD(08,01) #CMD(21,01) #CMD(51,00) #CMD(52,00) #CMD(08,00)
#CMD(54,01) #CMD(55,01) #CMD(56,0E)
#CMD(58,08) #CMD(59,04);
I think EM is enabled always in 8.5
seq_set_prop_5_0=#JMIN(00,00)
$z0
$p1 05
$c1 00
$c0 02 #JMAX(00,10) #JAVG(00,08) $cl
$c0 04 #JMAX(00,78) #JAVG(00,5A) $cl
$c0 08 #JMAX(02,4e) #JAVG(01,f4)
$cx $cx $cx
$s2 5b
#JQUALITY;
SET_JPEG_MAX=06 02 00 0D !1 !0 #END;
SET_JPEG_MIN=06 02 00 0F !1 !0 #END;
SET_JPEG_AVG=06 02 00 11 !1 !0 #END;
SET_JPEG_QUALITY= $p1 0e
$c1 01
$s2 32
#SET_JPEG_MIN(00,01)
$cx
07 02 00 13 $w2 $w2 $w2 #END;
seq_set_prop_5_1=$z0
$s2 5e
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_AVG(00,0F) #SET_JPEG_MAX(00,19) $cl
$c0 04 #SET_JPEG_MIN(00,4B) #SET_JPEG_AVG(00,64) #SET_JPEG_MAX(00,96) $cl
$c0 08 #SET_JPEG_MAX(02,68) #SET_JPEG_MIN(01,F4) #SET_JPEG_AVG(02,44) $cl
$cx $cx $cx
#SET_JPEG_QUALITY
$s8 01;
seq_ss_take= $c8 00
#DEF_SHOT
$cl
#IMP_SHOT
$cx;
The ($s8 00 ) it does not exist
_________________
k750 cid49 FW(w800 r1bc002)
Camdrivers database for k(d)750/w800/w810
(Site Mr.Kája) http://www.camdrivers.wz.cz/
[ This Message was edited by: jonaugust_69 on 2007-10-01 00:14 ]
Posted by lpachuong
Thanks jonaugust_69 for that information. Now I fix the problem of EM on/off
I forgot to put $s8 00 so my code get confusing when turn EM off at the first shot. Thank you.
Posted by lengstreet
On 2007-09-30 17:20:02, billcat wrote:
@ lengstreet
can you post some distant shots also ..................
if i have a time im back to post it
On 2007-09-30 18:04:00, billcat wrote:
@ lengstreet
how can i zoom with macro on and take a picture ............
at macro mode:
adjust +,- (1.1-4.0) take half shutter adjust +,- again for take a best shot
Posted by xxdjrerunxx
Hi 'im just wondering when i take pictures out side my iso is always at 80 i'm wondering if i can change it to 100 when i take a picture outside?
Posted by terminator17
On 2007-09-29 19:32:07, terminator17 wrote:
On 2007-09-26 14:19:04, Raiderski wrote:
terminator17
i made my config as Em on in fine quality..
when i did so,sharpneess level reduced,i generally getting blurred images at close range..
everytime when EM is used sharpness will hurt because of:
1. slower shutter speed (longer exposition time)
2. even tiny hands move (what is obvious)
3. always enabled image filtering (to eliminate big chroma/luma noise)
so wht is d solution u suggest..shudnt i use Em on in fine..with EM off indoor pics..i do get noise also..thats y i prefer EM on..as no noise is thr....
i dont get any blurrness with other driver evn with EM on..
waiting for your reply...thnx u can PM also and tell me
Posted by terminator17
@lpachuong
wow..ur 8.5 is amazing...not checked much yet..slightly slower than your v8.4...
anyways.amazing with 98%..no crash till now
thnx a lot..
Posted by Raiderski
don_gori
so, maybe you'll swap exactly the same drivers in both phones and repeat test? differences will be easier to understand
terminator17
i dont get any blurrness with other driver evn with EM on..
6.6 don't have problems with EM. code of this feature is identical in most drivers. so the problem can be in your shaked hand or in disabled macro mode during close range (below 40cm) shots with autofocus. i never use EM if i don't have to (rarely) but i always prefer stable ground under phone than my hands
Posted by terminator17
On 2007-10-01 09:58:56, Raiderski wrote:
don_gori
so, maybe you'll swap exactly the same drivers in both phones and repeat test? differences will be easier to understand
terminator17
i dont get any blurrness with other driver evn with EM on..
6.6 don't have problems with EM. code of this feature is identical in most drivers. so the problem can be in your shaked hand or in disabled macro mode during close range (below 40cm) shots with autofocus. i never use EM if i don't have to (rarely) but i always prefer stable ground under phone than my hands
i told u,i take care of all above thing..i definately enable macro mode 4r close shots and take care of shaking hand...anyways thanx
Posted by Raiderski
terminator17
what's the point? be sure that you're using 6.6 for W810 (without sharpness modification), make couple of pics with 6.6 and other driver at the same angle, light conditions, used parameters and then show the problem - this will resolve all doubts