Posted by obentou
OK Nevermind, my problem is fixed... I just used the CID36 version with a line change on my CID49 K750i. Take the friggin link off the CID49 version, it doesn't even work..
Edit: Oh and BTW, keep up the good work on this cam driver, it's absolutely great.
[ This Message was edited by: obentou on 2007-03-11 17:58 ]
Posted by whatsucka
wat do Document mode do??
is it like a better micro mode??
Posted by Kriomag
On 2007-03-11 19:32:42, whatsucka wrote:
wat do Document mode do??
is it like a better micro mode??
its for taking shots of documents...
Posted by whatsucka
ok heres r some pics i took
1)
this is default driver no night mode
2)
default driver with night mode
3)
enhanced night mode
Exposure Time % ISO
1) 1/20sec ISO-800
2) 1/20sec ISO-800
3) 2sec ISO-100
File size
1) 355k
2) 354k
3) 182k
somehow the smallest file size wins all. for enhanced night mode i have to wait very long to take a picture, sometimes my hand aint that steady... it comes out a very blur picture ~_~
please give some comment
Posted by whatsucka
to Kriomag:
i wonder is your firmware R1CA021?? does it work on w800 too??
also why is your picture size is 1024 x 768, i cant find that option at all in my w800, did u resize most of your pictures??
Posted by procyon
On 2007-03-11 20:20:52, whatsucka wrote:
somehow the smallest file size wins all. for enhanced night mode i have to wait very long to take a picture, sometimes my hand aint that steady... it comes out a very blur picture ~_~
please give some comment
1) The last picture is smaller because it has less noise thanks to night mode. Less noise = less information = smaller file size when packed to jpeg.
Also the image is a bit blurred, probably because of hand movement and blurred images have even less information, which again decreases file size.
2) Enhanced night mode is supposed to take a long time, because it uses a long exposure of 3 - 4 seconds. That's the whole point of it. Long exposure with low ISO means nice and noisefree pictures in dark conditions. There is no other way of getting good pics in low light besides using long exposure times. (Well .... getting a camera with a larger sensor chip also helps
)
Posted by whatsucka
now i wish w800 have a camera stand... so i wont b shaking so much while taking a picture
Posted by Magicnet2
Well there is a way to achieve good static night pictures with enhanced exposure time, but doesn't work for all pictures. You can lay it somewhere and set the timer
but as I said, if you want a picture of a flower from above... nope, not steady at all...
I love the 8.53 cause it has many modes, so I can choose carefully and get a goooood picture. In good weather conditions, you can get a freagin goooood picture. And the night mode is really nice. But the 9.0 is ok aswell, but the 8.53 is a little bit clearer and has a little bit warmer colours. (my opinion)
Posted by whatsucka
i cant leave my w800 on the table because i've peeling the mem stick slot plastic on n off a lot.... so my w800 cant stand up... it will keep falling down or it can only focus on the ground...sad
Posted by Magicnet2
it can stand on the port for the headphones. At least my k750 can make it, if the table is straight enough. And w800 has almost the same case, so...
Posted by mladen750i
These are 3 subversions of 8.8 version SUPER CAMERA DRIVER...
Each version is based on yours, like you said, favorite drivers...but..with SUPER MODE functions, which i won`t explain, because i belive that`s all clear...
Only i must wrote is that in 1.0 scene, you have default settings of based driver which is implemented...
And these drivers are tested on k750i cid49, with w800 r1bc002 fw...worked fine, without unknown behaving... Probably worked on cid36 platforms...
Scences are:
1.0 Default (v9.0 or v7.7final or 7.7edited)
1.1 Enhanced mode
1.2 Document
1.3 Portrait
1.4 Beach/snow
1.5 Nightscene
1.6 Sports
1.7 Landscape
NOTE: Enhanced mode for night shots works in next way...
If you want to shot some photo in low light conditions, you just do it with 1.1 scene, but with 0.0 EV, it gives ISO100 value, but 2s of exposure...
But if you just change EV value to -0.3, exposure is 1s, but little higher ISO value, no lower picture quality...
On -0.7 EV value, exposure is 0.6s, and that`s is good and optimal way to make a enhanced photo without blur points...Ofcourse, that result of higher ISO value, but it`s no something drastic...
Links for download:
Super camera driver version v8.8(based on version v9.0 of BLKSnaker)
http://www.rogepost.com/n/9750779153 or
http://www.filefactory.com/file/74da43/
Super camera driver version v8.8(based on version v7.7final of andeo)
http://www.rogepost.com/n/8307388381 or
http://www.filefactory.com/file/e9c53c/
Super camera driver version v8.8(based on version v7.7fedited of neotracer)
http://www.rogepost.com/n/9062260738 or
http://www.filefactory.com/file/8ff828/
Enjoy...
Best regards
Mladen
[ This Message was edited by: mladen750i on 2007-03-12 13:02 ]
Posted by jkadg
how to use it and how can i see the difference? i wanted to improve my camera. thanks.
Posted by guguly
many thanks for the different default camera settings you made...now, we have more options to choose from depending on our phone types...
but what happened to the first and original GXG based driver you made? That's also a good default camera setting......
[ This Message was edited by: guguly on 2007-03-12 05:19 ]
Posted by Kriomag
On 2007-03-11 20:34:24, whatsucka wrote:
to Kriomag:
i wonder is your firmware R1CA021?? does it work on w800 too??
also why is your picture size is 1024 x 768, i cant find that option at all in my w800, did u resize most of your pictures??
Now i have FS and MAIN W800_R1BC002 cause i want some patches
and yes, i resized most of the pictures to 1024x768
Posted by Kriomag
On 2007-03-12 02:48:47, mladen750i wrote:
These are 3 subversions of 8.8 version SUPER CAMERA DRIVER...
Each version is based on yours, like you said, favorite drivers...but..with SUPER MODE functions, which i won`t explain, because i belive that`s all clear...
Only i must wrote is that in 1.0 scene, you have default settings of based driver which is implemented...
And these drivers are tested on k750i cid49, with w800 r1bc002 fw...worked fine, without unknown behaving... Probably worked on cid36 platforms...
"..."
Enjoy...
Best regards
Mladen
hmm, its good but not v good
- Why cant get iso100 in enhanced nightmode? always its 125 or 160 = little more noise...
- Can you make scene selection only when macro is on? i like to record movies with zoom and now scenes are changing...
- Why profile 1.1 is forced 2 sec. ? when i tried to take shot in day light picture was white
in chengrong's 8.53 it was an automatic work
PS. Or can you make instruction how to implement own favorite driver settings to 8.8 or 8.53 ?
plz
[ This Message was edited by: Kriomag on 2007-03-12 08:00 ]
[ This Message was edited by: Kriomag on 2007-03-12 08:00 ]
Posted by salambaba
On 2007-03-12 02:48:47, mladen750i wrote:
Scences are:
1.0 Default (v9.0 or v7.7final or 7.7edited)
1.1 Enhanced mode
1.2 Document
1.3 Portrait
1.4 Beach/snow
1.5 Nightscene
1.6 Sports
1.7 Landscape
NOTE: Enhanced mode for night shots works in next way...
If you want to shot some photo in low light conditions, you just do it with 1.1 scene, but with 0.0 EV, it gives ISO100 value, but 2s of exposure...
But if you just change EV value to -0.3, exposure is 1s, but little higher ISO value, no lower picture quality...
On -0.7 EV value, exposure is 0.6s, and that`s is good and optimal way to make a enhanced photo without blur points...Ofcourse, that result of higher ISO value, but it`s no something drastic...
Links for download:
Super camera driver version v8.8(based on version v9.0 of BLKSnaker)
http://www.rogepost.com/n/9750779153 or
http://www.filefactory.com/file/74da43/
Super camera driver version v8.8(based on version v7.7final of (don`t know the author))
http://www.rogepost.com/n/8307388381 or
http://www.filefactory.com/file/e9c53c/
Super camera driver version v8.8(based on version v7.7fedited of (don`t know the author))
http://www.rogepost.com/n/9062260738 or
http://www.filefactory.com/file/8ff828/
Enjoy...
Best regards
Mladen
Very very thanks .
Posted by stingjoel
@mladen750i;
I've tried "Super camera driver version v8.8(based on version v7.7fedited of (don`t know the author))".
I turn macro on and take photos...after that I close the camera and when I open the camera again, the camera won't start...could you fix the bug? fyi, mine is K750i CID36. TIA.
Posted by dennis.l
@mladen750i
Hi,
The 7.7 final is by andeo and the 7.7edit is done by a guy called neotracer I think.
Also can you please post the zuza one as well pls.
Q: does the Zuza and 9.0 drivers have the smaller JPEG size too?
Posted by mladen750i
@guguly
GXG driver have jpeg algorithm bug, and that's happen with it (some day shot, eg. black-white surface, close the camera, goes to menu)
@Kriomag
You searching "hair in egg"! Why would you use enhance night in day shot?! That's wrong use... Use 1.0 with or without night ON... Enhance night work little different... YES, don't have that automatic, but have possibility
to change exposure time, changing EV... That's explain...
Posted by elevation1
mladen thanks for your work!!! i've download 8.8 with 9.0 driver and the photo is only 250kb!!! why? if you can and if you want... can you update this beautiful firmware 8.8 with original 5.3 sony driver in daylight? anyway thanks
Posted by mladen750i
@stingjoel
That's not a bug, but only cid49 tested driver on k750i... i wrote that...and wrote PROBABLY works on cid36... in your case, we saw it's not working well... try adding lines removed by Chengrong in cid49 version... search for differences in his cid36 and cid49 versin, and add it in this drivers...
Posted by mladen750i
@dennis.l
YES
@elevation1
Because the original 9.0 driver would be acting in that way, compressing image in same way...
Posted by ionutph
On W810i the 8.8 with 9.0 and 7.7f (7.7 fe not tested) is not working good. On 1.1 scene, it remains the same as 1.0 (and I think 1.2 the same) .
[ This Message was edited by: ionutph on 2007-03-12 19:11 ]
Posted by whatsucka
here is something green i took today in school
FW: R1BC002 cam driver:8.53
night mode: on micro mode: on
Posted by stingjoel
@mladen750i;
Thank you...I've added that line and the bug is gone.
On 2007-03-12 12:18:15, mladen750i wrote:
@stingjoel
That's not a bug, but only cid49 tested driver on k750i... i wrote that...and wrote PROBABLY works on cid36... in your case, we saw it's not working well... try adding lines removed by Chengrong in cid49 version... search for differences in his cid36 and cid49 versin, and add it in this drivers...
Posted by elevation1
so is not possible have a 8.8 based on original 5.3 driver sony and 1.1 scene with 8.53 supercamera driver? for me it would be great!!! thanks
p.s. where i can download driver original 5.3 sony?
Posted by Ricky D
great stuff, works a treat, thing is, I loaded the driver then changed my phone two weeks later. I still carry my W800 around just for the camera capabilities though (and the torch).
Posted by comhank
8.8 macro EV+0.0
[ This Message was edited by: comhank on 2007-03-13 13:02 ]
Posted by comhank
Posted by Resonantz
what driver do you used (8.8 with 9.0, 7.7f, 7.7fe or simple)?
[ This Message was edited by: Resonantz on 2007-03-13 13:58 ]
Posted by Magicnet2
Nice nice, very ice. Ill be posting in a few hours a comparism of basic 8.53, 7.7, 9.0 and sharp. All took the same photo with normal and then with noght mode on, all with the same lighting conditions all during only 10 minutes of me sitting in a pub. Its taken with a reflashed k750 to w800 R1BC002. So ill have to post 8 pictures for you to compare. Well see what will be the verdict.
Posted by jangjr
chengrong 8.53 in macro mode
[ This Message was edited by: jangjr on 2007-03-13 14:15 ]
Posted by mladen750i
UPDATED
(solved video recording mistake...)
These are 3 subversions of 8.8 version SUPER CAMERA DRIVER...
Each version is based on yours, like you said, favorite drivers...but..with SUPER MODE functions, which i won`t explain, because i belive that`s all clear...
Only i must wrote is that in 1.0 scene, you have default settings of based driver which is implemented...
And these drivers are tested on k750i cid49, with w800 r1bc002 fw...worked fine, without unknown behaving... Probably worked on cid36 platforms...
Scences are:
1.0 Default (v9.0 or v7.7final or 7.7edited)
1.1 Enhanced mode
1.2 Document
1.3 Portrait
1.4 Beach/snow
1.5 Nightscene
1.6 Sports
1.7 Landscape
NOTE: Enhanced mode for night shots works in next way...
If you want to shot some photo in low light conditions, you just do it with 1.1 scene, but with 0.0 EV, it gives ISO100 value, but 2s of exposure...
But if you just change EV value to -0.3, exposure is 1s, but little higher ISO value, no lower picture quality...
On -0.7 EV value, exposure is 0.6s, and that`s is good and optimal way to make a enhanced photo without blur points...Ofcourse, that result of higher ISO value, but it`s no something drastic...
Links for download:
Super camera driver version v8.8(based on version v9.0 of BLKSnaker)
http://camdriver0.farvista.ne[....]8_based_on_v9.0_SUPER_MODE.rar
Super camera driver version v8.8(based on version v7.7final of (don`t know the author))
http://camdriver0.farvista.ne[....]ed_on_v7.7final_SUPER_MODE.rar
Super camera driver version v8.8(based on version v7.7fedited of (don`t know the author))
http://camdriver0.farvista.ne[....]_on_v7.7fedited_SUPER_MODE.rar
note:
if links dont work, go on:http://camdriver0.farvista.net
Enjoy...
Best regards
MLADEN
[ This Message was edited by: mladen750i on 2007-03-13 16:14 ]
Posted by wizake
@comhank: why are there different colors in those two pictures? the green is different
@mladen: what video problem? I didnt notice it ( I use 8.8 based on 9.0 with w810i). do I need to upgrade ?
Posted by idalki
I dont know how to choose, What is the best version with a zoom of 16x please
May yo upload it?
Thanks
Posted by idalki
Please what do you think is the best for a w810i?
Thanks a lot
It is necesary to insert <<*<<*
I hope not
Posted by tranced
you do not have to do that keys combo. this was fixed long time ago.
| Quote: |
|
find the line:
seq_init=05 02 00 0B D0 #CMD_END
05 02 00 0C 07 #CMD_END
06 02 00 01 00 52 #CMD_END
05 02 00 18 00 #CMD_END
06 02 00 01 05 56 #CMD_END
06 02 00 01 01 55 #CMD_END
06 02 00 01 00 08 #CMD_END
$s0 09 $-0 0a 06 02 00 01 $w0 06 #CMD_END
$s6 7f
#GET_SENSOR_VERSION;
replace with
seq_init=05 02 00 0B D0 #CMD_END
05 02 00 0C 07 #CMD_END
06 02 00 01 00 52 #CMD_END
05 02 00 18 00 #CMD_END
06 02 00 01 05 56 #CMD_END
06 02 00 01 01 55 #CMD_END
06 02 00 01 00 08 #CMD_END
$s0 09 $-0 0a 06 02 00 01 $w0 06 #CMD_END
$s6 09
#GET_SENSOR_VERSION;
open camera direct into SuperMode.
Posted by mladen750i
wizake wrote: what video problem? I didnt notice it ( I use 8.8 based on 9.0 with w810i). do I need to upgrade ?
It would be nice, because video recording worked in reverse way, because of my mistake..
Wrote me, how it worked on your w810i, does working the enhanced night in 1.1?!
[ This Message was edited by: mladen750i on 2007-03-13 20:41 ]
Posted by GsS 7tr
On my W810 the enhanced night mode isn't working. Also the 1.2 mode dont work. Sorry for my bad english. BTW, Thx for all your efforts.
[ This Message was edited by: GsS 7tr on 2007-03-13 21:04 ]
Posted by pimp123
Thanks for all your efforts mladen.
Just one question, what about the "1.8 Manual Exposure Scence" function from original 8.53?
Is it still there on 8.8?
Edit
Also a suggestion, since you changed the order of the scenes perhaps you should make it so that the first ones (1.1 and up) are the urgent ones like sports and place the slow ones at the end.
I.e. quicker access to the fast ones for cases when we don't have time.
When shooting long exposure ones it means we definately have a lot of time in our hands and we can afford a few more presses of the zoom button.
_________________
[ This Message was edited by: pimp123 on 2007-03-13 21:09 ]
Posted by mladen750i
On 2007-03-13 21:56:39, GsS 7tr wrote:
On my W810 the enhanced night mode isn't working. Also the 1.2 mode dont work. Sorry for my bad english.
Hmm, try this...
http://camdriver0.farvista.net/w810ifirst.rar
or
http://camdriver0.farvista.net/w810isecond.rar
note: just copy and paste this links in new window of browser, n download...
[ This Message was edited by: mladen750i on 2007-03-13 21:26 ]
Posted by GsS 7tr
I tried both of them, and still doesn't work. Or maybe it's me, but i'm not seeing any different between the 1.0, 1.1 and 1.2 modes.
[ This Message was edited by: GsS 7tr on 2007-03-13 21:38 ]
Posted by nemofitch23
is your nightmode on?
Posted by GsS 7tr
Yeah, and with the 8.53 its working fine.
Posted by GsS 7tr
I tried again with the W810second and now it's working.
On which drivers it's based?
Thx Mladen
_________________
[ This Message was edited by: GsS 7tr on 2007-03-14 02:35 ]
[ This Message was edited by: GsS 7tr on 2007-03-14 02:51 ]
Posted by comhank
@Resonantz
@wizake
my w810 used camdriver 8.8 simple
1st pic 8.8 macro EV+0.0 nightmode on Scences 1.0 Default
2st pic nightmode off
it's cool for my w810
thax mladen750i
sory i'm bad english
[ This Message was edited by: comhank on 2007-03-14 03:54 ]
Posted by pram_zx
@mladen
what is w810first and w810second? camdriver just only for w810? what is the different with the other camdriver(default v9.0, v7.7, v77fedited) ???
Posted by mladen750i
On 2007-03-14 04:52:37, pram_zx wrote:
@mladen
what is w810first and w810second? camdriver just only for w810? what is the different with the other camdriver(default v9.0, v7.7, v77fedited) ???
Posted by comhank
hi mladen
what's camdriver8.8 on Scences:1.0 GxG?? it's camdriver ver.??
Posted by pram_zx
@mladen
I will test your driver with default v7.7F and v9.0
Cheers...!