Posted by whatsucka
[drool...]i so want to get this car!! using kriomag 21.8 EM
in my house using ENM
Posted by myavu
On 2007-04-28 07:43:53, sarmadgilani wrote:
yep, thanks guguly
as guguly mentioned, this is 4.81 with original 4.5 stock compression tables.. compression is set to 89 since I've got a huge memory stick.
gives you pictures around 500kb, not bad.
Sarmad's 4.81 with stock JPEG compression
Link: http://www.mediafire.com/?1ydwzinzuq1
[ This Message was edited by: sarmadgilani on 2007-04-28 06:46 ]
Hope this will reduce the image bluring...
Now I have to reload 4.81...
Thanks
Posted by Nirodha
On 2007-04-28 07:43:53, sarmadgilani wrote:
yep, thanks guguly
as guguly mentioned, this is 4.81 with original 4.5 stock compression tables.. compression is set to 89 since I've got a huge memory stick.
gives you pictures around 500kb, not bad.
Sarmad's 4.81 with stock JPEG compression
Link: http://www.mediafire.com/?1ydwzinzuq1
[ This Message was edited by: sarmadgilani on 2007-04-28 06:46 ]
Hi Sarmad,
I realize you're busy, so I hacked the 4.81 Spot version to include the new stock Jpeg compression values. Someone please check it/test it to be sure I did it correctly. It's available below:
Sarmad's 4.81 Spot Photometry with stock JPEG compression
http://www.mediafire.com/?6n2tjwtti2k
P.S. I've got an idea to make Fine Quality pix use the stock compression and have Normal Quality pix use the automatic compression. What do you think Sarmad? And, if I were to do that, which seq_set_prop (5_0 or 5_1) would I change?
_________________
Black W810i: Crystal Case, Samsonite black leather holster, 512MB + 2GB Memory Sticks, R4DB005 firmware, Pimped FM Megabass 7.0 Acoustic, Sarmad 4.81 w/Spot Camera, 20+ extra Flash menus, custom Startup and Shutdown screens. Luvin' it!
[ This Message was edited by: Nirodha on 2007-04-28 07:31 ]
Posted by ryanchow
Which camdriver have the best quality? THX
[ This Message was edited by: ryanchow on 2007-04-28 07:14 ]
Posted by pakraider
On 2007-04-28 08:13:47, ryanchow wrote:
Which camdriver have the best quality? THX
There's no easy answer to that.. you'll have to try different ones and see your results.. as a K750 user (I assume you are from your icon) you should first try Kriomag's and Kopritis's mods.. my 4.81 is good as well but geared more towards W810.. but should work well with K750 also.
Posted by kopritis
kopritis 35.5 Based on 5.3 original sony camdriver
1. Advanced Zoom
2. Default compressions from original 5.3 camdriver 75% for normal mode and 85% for fine mode
3. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
4. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
5. Color Correction
6. Automatic WB for leds
7. Fast ENHANCE NIGHT MODE when you "turn ON the Nightmode and Macro ON" Led Supported (modded from me)
8. Fast ENHANCE MODE when you "turn ON the Macro" (modded from me)
http://www.rogepost.com/n/4539120658
Instructions for Manual Focus:
-----------------------------------------------------------------------------------------------------------------------------------------------------
(Macro ON).
When in range 1.2-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter)
now (when zoom is on) you can adjust focus very precisely (+/-)
when picture is most sharp click half-shutter again (the zoom will go off and EV will be corrected)
and now press shutter to take picture.
[ This Message was edited by: kopritis on 2007-04-28 11:05 ]
Posted by kukuh
On 2007-04-28 11:28:03, kopritis wrote:
kopritis 35.5 Based on 5.3 original sony camdriver
i will try it.
but, little people talking in here.i will go home..
Posted by Raiderski
@kopritis
600kb limit for original 5.3 camdrv in max resolution? original was 560 dude.
Posted by kopritis
On 2007-04-28 11:46:49, Raiderski wrote:
@kopritis
600kb limit for original 5.3 camdrv in max resolution? original was 560 dude.
yeap i agree, but the compressions are 4b and 55 from the original. get it???
[ This Message was edited by: kopritis on 2007-04-28 10:59 ]
Posted by elevation1
thanks kopritis...
Posted by kopritis
@All
can anyone test my new mod on w810? Because i don't have a w810 and i don't know if it's work...
For k750 and w800 works ok!
Posted by pakraider
On 2007-04-28 08:12:30, Nirodha wrote:
P.S. I've got an idea to make Fine Quality pix use the stock compression and have Normal Quality pix use the automatic compression. What do you think Sarmad? And, if I were to do that, which seq_set_prop (5_0 or 5_1) would I change?
I thought about that too.. but then we're putting too many options on the quality mode selection.. but there's definitely no problem in doing it.. seq_set_prop_5_0 is Fine mode.. 5_1 is Normal mode.. so you could do something like
seq_set_prop_5_1 = $s8 00;
this way, normal quality mode will have the automatic compression and leave CC off.. and fine mode will have stock compression and CC on.. but really I don't think it's a great idea, but the option is there if you really want to do it.
Posted by AllanJacques
I put this:
seq_set_prop_5_0=$z0
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,19) #SET_JPEG_AVG(00,0F) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,96) #SET_JPEG_AVG(00,50) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,e0) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s8 00;
seq_set_prop_5_1=$z0
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,19) #SET_JPEG_AVG(00,0F) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,96) #SET_JPEG_AVG(00,50) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,e0) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s8 01;
instead of this:
seq_set_prop_5_0=$s2 59 $s8 01 06 02 00 01 01 08 #CMD_END;
seq_set_prop_5_1=$s2 59 $s8 00 06 02 00 01 00 08 #CMD_END;
is it correct? should work or is it wrong?
thanks guys!!!
Posted by Mr.Kája
kopritis you will kill me, but I'm not sure, adding EM is great idea. Well I took quickly two photos....very fast em, but maybe more noisy (I havent tested long, so maybe I'm totaly out). I confess that I replaced it with your older version because fast non-focusing shooting.)))
Posted by Nirodha
On 2007-04-28 15:16:14, AllanJacques wrote:
I put this:
seq_set_prop_5_0=$z0
$s2 59...
is it correct? should work or is it wrong?
thanks guys!!!
Hi Allan and Sarmad,
Here's a version of 4.81 Spot I just hacked to include JPEG 75% on Normal Quality pix and JPEG 89% on Fine Quality pix. So far, it seems to work fine.
Sarmad 4.81 with Spot Photometry and Optimal JPEG
http://www.mediafire.com/?4iixddmmkke
And, here are a couple of example pix:
Enhanced, Night Mode, LED Flash, Autofocus, Normal Quality (281 KB)
Enhanced, Night Mode, LED Flash, Autofocus, Fine Quality (482 KB)
Peace,
Nirodha
_________________
Black W810i: Crystal Case, Samsonite black leather holster, 512MB + 2GB Memory Sticks, R4DB005 firmware, Pimped FM Megabass 7.0 Acoustic, Sarmad 4.81 w/Spot Camera, 20+ extra Flash menus, custom Startup and Shutdown screens. Luvin' it!
[ This Message was edited by: Nirodha on 2007-04-28 17:23 ]
Posted by pRo_lama
Kriomag v21.8
Sarmad's 4.81
I think that Sarmad's 4.81 is the best camdriver for making photos with makro.
Posted by Kriomag
On 2007-04-28 16:51:22, pRo_lama wrote:
I think that Sarmad's 4.81 is the best camdriver for making photos with makro.
maybe your phone is broken?
on my k750 21.8 macro is working very good, maybe you turned 1.1 (infinity) while making thic pictures? :/ strange....
PS. on my 2 brothers k750's macro is working also v good.
Posted by 666cin
@ kiromag when you will release 21.9 ?
and by the way... in my k750i@w800i 21.8?(fixed) works great!
especially macro mode...
[ This Message was edited by: 666cin on 2007-04-28 16:44 ]
[ This Message was edited by: 666cin on 2007-04-28 16:48 ]
Posted by obentou
@pro_lama
Perhaps it has to do with your phone, not all camdrivers work well with a particular type of phone, as pointed out by Sarmad and the sharpness settings.
Or, you just plain stink at taking pics... haha, the pictures seem so one-sided for some reason. But I have still yet to try Sarmad's...
Do you mind posting up the link to 4.81 so I can give it a try myself?
Posted by kopritis
@Mr.Kája
35.5 is not my final version... so, every notice will be good for me!
Posted by jonaugust_69
Kriomag_v21.8_CCkopritis_modification__Jonaugust_69_For_ALL
Autofocus fixed! :kukuh
works okay thanks
http://rapidshare.com/files/2[....]_Jonaugust_69_For_ALL_v0.2.zip
Normal mode, Macro ON + LED, Autofocus
Posted by kopritis
kopritis 35.6 Based on 5.3 original sony camdriver final
1. Advanced Zoom
2. Default compressions from original 5.3 camdriver 75% for normal mode and 85% for fine mode
3. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
4. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
5. Color Correction
6. Automatic WB for leds
7. Fast ENHANCE NIGHT MODE when you "turn ON the Nightmode and Macro ON" Led Supported (modded from me)
8. Fast ENHANCE MODE when you "turn ON the Macro" (modded from me)
for k750 and w800: http://www.rogepost.com/n/4632858276
for w810 : http://www.rogepost.com/n/8770953928
Instructions for Manual Focus:
-----------------------------------------------------------------------------------------------------------------------------------------------------
(Macro ON).
When in range 1.2-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter)
now (when zoom is on) you can adjust focus very precisely (+/-)
when picture is most sharp click half-shutter again (the zoom will go off and EV will be corrected)
and now press shutter to take picture.
[ This Message was edited by: kopritis on 2007-04-28 17:36 ]
Posted by pakraider
Nirodha there was a bit of a mistake in your hack, hehe.. but ive fixed it, its a good idea to have that change in compression between 75 and 89 for those who want a smaller size.. so here we go, the choice of drivers!
Sarmad's 4.81 driver - Standard version
http://www.mediafire.com/?1ydwzinzuq1
4.81 with Spot Photometry support
Fine Mode = Spot on, CC on. Normal mode = Spot off, CC off.
JPEG Compression at 89
http://www.mediafire.com/?cmxmgmtjgxx
4.81 with Spot and Compression Switching
Fine Mode = Spot on, JPEG compression at 89
Normal mode = Spot off, JPEG compression at 75
http://www.mediafire.com/?9uoijuztilz
Posted by kopritis
test shots from my camdriver 35.6
(macro on)EM + manual focus + led on
(macro on)EM + manual focus + led on
(macro on)EM + AUTOFOCUS + led on
[ This Message was edited by: kopritis on 2007-04-28 18:04 ]
Posted by Nirodha
On 2007-04-28 18:42:12, sarmadgilani wrote:
Nirodha there was a bit of a mistake in your hack, hehe.. but ive fixed it, its a good idea to have that change in compression between 75 and 89 for those who want a smaller size.. so here we go, the choice of drivers!
Ahh, thanks
By the way, what did I screw up?
_________________
Black W810i: Crystal Case, Samsonite black leather holster, 512MB + 2GB Memory Sticks, R4DB005 firmware, Pimped FM Megabass 7.0 Acoustic, Sarmad 4.81 w/Spot Camera, 20+ extra Flash menus, custom Startup and Shutdown screens. Luvin' it!
[ This Message was edited by: Nirodha on 2007-04-28 17:53 ]
Posted by jonaugust_69
Γιά σου Ελλάδα...
Posted by kopritis
On 2007-04-28 18:56:01, jonaugust_69 wrote:
Γιά σου Ελλάδα...
Γειά σου κι εσένα....
Posted by Kriomag
On 2007-04-28 17:39:26, 666cin wrote:
@ kiromag when you will release 21.9 ?
soon i think
but now i have other things to do:
My new CPU
2.9Ghz on default vcore (3Ghz with higher voltage but temp. is too high for me )
PS. 21.9:
LedWB:
[ This Message was edited by: Kriomag on 2007-04-28 19:28 ]
Posted by Mr.Kája
I tested you 35.6, kopritis. I think, enm and em are quite bad in worse light condition (well, it could be expected, when the mode is faster). But what could be helpful:
EM mode in worse conditions it too much into green (but outside, it was ok, no differences between it and em and normal, just in darker rooms and even with led)
and very strange was, what happened in normal and em (enm) mode:
Normal mode...strange colors (i saw same effect just on 2photos, so not so often.
EM mode, colors better, closer to reality...
..and ENM is the same, just to compare.
Posted by kopritis
@Mr.Kája
Color Correction is the problem i thing about the colors! Sometimes CC gives strange colors... I'm gonna remove CC
I want to check please if you can the WB with led on without EM AND ENM
to tell me if it's work ok... because for my eyes it's ok!
[ This Message was edited by: kopritis on 2007-04-28 19:12 ]
Posted by kopritis
kopritis 35.7 Based on 5.3 original sony camdriver without CC
1. Advanced Zoom
2. Default compressions from original 5.3 camdriver 75% for normal mode and 85% for fine mode
3. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
4. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
5. Automatic WB for leds
6. Fast ENHANCE NIGHT MODE when you "turn ON the Nightmode and Macro ON" Led Supported (modded from me)
7. Fast ENHANCE MODE when you "turn ON the Macro" (modded from me)
for k750/w800: http://www.rogepost.com/n/7873248854
for w810: http://www.rogepost.com/n/9297905279
mirror links:
for k750/w800: http://rapidshare.com/files/28455909/kopritis_35.7.rar.html
for w810: http://rapidshare.com/files/28456085/kopritis_35.7w810.rar.html
Instructions for Manual Focus:
-----------------------------------------------------------------------------------------------------------------------------------------------------
(Macro ON).
When in range 1.2-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter)
now (when zoom is on) you can adjust focus very precisely (+/-)
when picture is most sharp click half-shutter again (the zoom will go off and EV will be corrected)
and now press shutter to take picture.
[ This Message was edited by: kopritis on 2007-04-29 00:08 ]
Posted by kutlas
Kriomag_v21.8_CCkopritis_CID49__Other_modification by_Jonaugust_69:
Posted by Mr.Kája
35.7 kopritis with led...anyway. sily question, what what does the "WB" shorcut mean? I know that I should know it O:o)
normal+led
em+led
enm+led
Posted by kopritis
@Mr.Kája
WB is White Balance... Thanks for the test
[ This Message was edited by: kopritis on 2007-04-28 19:56 ]
Posted by pRo_lama
On 2007-04-28 17:24:45, Kriomag wrote:
On 2007-04-28 16:51:22, pRo_lama wrote:
I think that Sarmad's 4.81 is the best camdriver for making photos with makro.
maybe your phone is broken?
on my k750 21.8 macro is working very good, maybe you turned 1.1 (infinity) while making thic pictures? :/ strange....
PS. on my 2 brothers k750's macro is working also v good.
Ok. I´m going to test these 2 cam drivers 1 week and then I´ll upload all my photos and difference in these 2 cam drivers. OK ????
Posted by Mr.Kája
Damn, right, thx Kopritis, I have week days:)))
Posted by mariusee
@kopritis
thanks for the new driver... i installed and i do some test on a trip tomorrow...
i'll be back with some samples photos
Posted by ziupo
On 2007-04-28 18:11:51, jonaugust_69 wrote:
Kriomag_v21.8_CCkopritis_modification__Jonaugust_69_For_ALL
Autofocus fixed! :kukuh
works okay thanks
http://rapidshare.com/files/2[....]_Jonaugust_69_For_ALL_v0.2.zip
kopritis - please, upload your files at two different servers
Posted by kopritis
@ziupo
go to the 1rst post on this page....
Posted by sxa
sarmadgilani,do your 4.81 have manual focus?
Posted by guguly
Sarmad 4.81
i've been testing the driver for a few days now. My observation: its very good at macro shots but it seems to have a problem on non-macro. some non-macro pictures i took tends to be blurry and/or overexposed (tooooo bright). i'm switching back to 5.03.
@sarmad
what if i change the sharpness and contrast setting of the 5.03 to that of the 4.81? Will it make any difference? Well, i'm guessing that since its both based on 4.5, it should give the same results? Am I right or wrong? hmmm...
[ This Message was edited by: guguly on 2007-04-29 02:31 ]
Posted by pakraider
@guguly .... check your PM.
Posted by cuckoo
5.03 camdriver,i want to collect.
but the link is bad,i hope somebody send this camdriver0.dat to me again.thanks
Posted by N0valyfe
@All
Heres a link for 5.03 again
http://www.rogepost.com/n/5821920323
Posted by cuckoo
many thanks for your camdriver~
Posted by guguly
@sarmad
regular shot (non-macro):
macro:
[ This Message was edited by: guguly on 2007-04-29 12:25 ]
Posted by pikszel
Sarmad_5.03 with Janek's speedmod (thanks Janek
)
_________________
"Az egyedüli létezô dolgok az atomok és az üres tér; minden egyéb puszta képzelet"
[ This Message was edited by: pikszel on 2007-04-29 09:17 ]
[ This Message was edited by: pikszel on 2007-05-01 10:53 ]
[ This Message was edited by: pikszel on 2007-05-01 10:53 ]
Posted by Raiderski
@sarmad
too much bright in 4.81 - exposure coefficient at 9 and contrast at 2 isn't the best choice for pictures in sunlight. maybe try to do this in other way - exposure at 0x0B (less exposition time), contrast at 3 - quite interesting effects, well maybe not the best but why not to try to do some "stupid things"?
Posted by BundyRRR
Hello everyone. Can somebody help me? Today I have tried all 21.8 Kriomag's versions but on my k750i cid 36 it doesn't work. Ather run the camera I have white screen and I can't make a photo. I think this driver have some bugs:( Doe's somebody have this same problem?
Posted by wayne_rooney
Kriomag_v21.8_CCkopritis_CID36__modification by_Jonaugust_69
this driver is really... slow in fine mode .....
little hiss disturb the full photo..... with macro on/off.....
anyone using any other camera driver for their cid36 phone....
plz tell me u r experience also.
currently 8.54 working gr88...