Posted by Mr.Kája
to jonaugust_69: Well, after a few hours, I downloaded CID49 version:) But, strange, look like it hates my phone..after first start, I just opened camera and even before I could see any, phone had reset...than, it worked better, but when I tried to shut down with camera, macro and night on, i couldn't start camera without reset (old mistake, it works for example in r2b001 versions of krio, 8.54...)
Posted by pakraider
ive done some more tests of 4.81.. and I think this might just be the perfect driver for the W810! focus works great and keeping the sharpness at 6 gives great results for the W810 (not sure bout the K750, you might need to notch it down to 5)
so from now on.. if anything i'll just be tweaking things here and there, but it looks like 4.81 is pretty much the final version. let me know how you guys like it!
here's a link in case you havent gotten it yet: http://www.mediafire.com/?cfwzwr5dhjm
Posted by hellvy
On 2007-04-24 17:31:47, sarmadgilani wrote:
Time for a proper send-off for 4.81..
Sarmad's 4.81 camdriver
.. its newer than 5.5..
....
Real-Life Color correction when FINE quality is chosen
Good Focus, Increased Sharpness and Contrast
....
Hi Kopritis,
Could you check this sarmad's feature out ? (Real-life CC without pinkish and yellowish) If it really work. I'll eat my word about denying CC recently and ask you (again) to put it in
About focus, sharpness and contrast, i'm fine with your current setting. But if this setting from sarmad can improve it, this should be wonderful
.
And i'm sorry to say that, i haven't tried your new camera driver since burst EM version. Because i gave my phone to my friend for some vacation to let it shoot some sea, sand, sun (and girls
) instead of same same flowers and plants. And my phone will be back to me in next month to try new driver. Anyway, thank you again for your new driver
Posted by navy614
@hellvy
would you like to show us the pics your friend taken?
we all expect for it...lol
[ This Message was edited by: navy614 on 2007-04-25 04:19 ]
Posted by jedah_omega9
Hi Everyone,
Im the newbie here, i have the 4.81, but how to do i install it? also about sound drivers, what would you recommend? any other driver that can help me get the best out of my w810i?
Thanks
Posted by myavu
On 2007-04-25 04:34:02, sarmadgilani wrote:
ive done some more tests of 4.81.. and I think this might just be the perfect driver for the W810! focus works great and keeping the sharpness at 6 gives great results for the W810 (not sure bout the K750, you might need to notch it down to 5)
so from now on.. if anything i'll just be tweaking things here and there, but it looks like 4.81 is pretty much the final version. let me know how you guys like it!
here's a link in case you havent gotten it yet: http://www.mediafire.com/?cfwzwr5dhjm
Yes I do agree... After a long time sticking with 21.4 (4.8) with CC... Now I feel 4.81 is best yet driver for CID 49 810i...
But Before finalising, the version number should be more than 5.5 say 6.0 because when new guys come to Esato, they should not be confused.
So why dont you just take 4.81 give it a version number 6.0 Final witll all possible featutes commented inside the driver.
Once agaian Sarmad 4.81 rules !!! Congrats !!!
Regards
Posted by myavu
On 2007-04-25 07:11:14, jedah_omega9 wrote:
Hi Everyone,
Im the newbie here, i have the 4.81, but how to do i install it? also about sound drivers, what would you recommend? any other driver that can help me get the best out of my w810i?
Thanks
Welcome jedah_omega9,
Use FAR wirh SEFP to upload Cam driver and Sound Driver
Best Cam Driver is 4.81
Best Sound driver is (For me - Good Sound and quality balanced) Exclusive Acoustic Pack for W810i (v 0.1) by Signature_Boy or for loudness only you can go for Smellulater's Best QualityW810.
Both available at http://forums.se-nse.net
Hope this helped you
Regards
Posted by myavu
On 2007-04-25 07:11:14, jedah_omega9 wrote:
and also... louder sound drivers will drain your battery faster...
Posted by whatsucka
do Exclusive Acoustic Pack for W810i (v 0.1) by Signature_Boy or for loudness only works on w800i cid36??
Posted by guguly
On 2007-04-24 23:59:53, jonaugust_69 wrote:
No limit for rapidshare,
download and run this : R_S-H http://rapidshare.com/files/27752731/R_S-H.zip
Zip Pas: http://www.esato.com
worked for me!
Thanks jonaugust_69!!
Posted by myavu
On 2007-04-25 08:22:34, whatsucka wrote:
do Exclusive Acoustic Pack for W810i (v 0.1) by Signature_Boy or for loudness only works on w800i cid36??
It is made for W810i CID 49, may work with W800 or K750...
Check the Forum
Regards
Posted by 679
@Kriomag
Still using 21.8 - realy perfect and well balanced driver. Have found some not bugs but mb features i dont understand.
For example
Pictures of a clouds
exp=1/6400 ISO=125
The next one - with sun..
exp=1/6400 but ISO=160! - must be less!
I don't miss exif!
Is it firmware (CID36) bug or driver feature?
And BTW - seems in this very strong light i have to get ISO=100. And not for sky pictures - where it is much of blue - but for buildings or trees I got ISO=100 with OK quality...
Posted by pikszel
I have same problem. But i think its not a problem. Its a compensation. Not present higher shutter speed than 1/6400, that is why higher ISO...
Posted by 679
On 2007-04-25 10:12:44, pikszel wrote:
I have same problem. But i think its not a problem. Its a compensation. Not present higher shutter speed than 1/6400, that is why higher ISO...
Vice versa man! For fixed exp and more light you MUST get smaller ISO...
[ This Message was edited by: 679 on 2007-04-25 09:46 ]
Posted by pikszel
On 2007-04-25 10:23:29, 679 wrote:
On 2007-04-25 10:12:44, pikszel wrote:
I have same problem. But i think its not a problem. Its a compensation. Not present higher shutter speed than 1/6400, that is why higher ISO...
Vice versa man! For fixed exp and more light you MUST get smaller ISO...
[ This Message was edited by: 679 on 2007-04-25 09:46 ]
I'm screwed...yahh...must smaller ISO...
Posted by Kriomag
On 2007-04-25 09:59:58, 679 wrote:
@Kriomag
Still using 21.8 - realy perfect and well balanced driver. Have found some not bugs but mb features i dont understand.
For example
Pictures of a clouds
[img]...[/img]
exp=1/6400 ISO=125
The next one - with sun..
[img]...[/img]
exp=1/6400 but ISO=160! - must be less!
I don't miss exif!
Is it firmware (CID36) bug or driver feature?
i think its not driver issue :/
Posted by primaru
21.8
4.81
both autofocus and CC
which one to chose???
Posted by Nirodha
Would someone tell me what "Spot Support" is and what it does, please?
Thanks
Posted by sesshoumaru
dear all,
i'm having this problem. am using krio's 21.8 cam driver. Sometimes when i turn on the camera and then shoot the picture, it exits to the standby mode. It doesn't say saving after taking picture but exits out. What could be the problem?
Posted by 679
On 2007-04-25 11:38:21, primaru wrote:
21.8
4.81
both autofocus and CC
which one to chose???
Make the same pictures from distance 1m and compare sharpness.
[ This Message was edited by: 679 on 2007-04-25 10:49 ]
Posted by Kriomag
On 2007-04-25 11:42:18, sesshoumaru wrote:
dear all,
i'm having this problem. am using krio's 21.8 cam driver. Sometimes when i turn on the camera and then shoot the picture, it exits to the standby mode. It doesn't say saving after taking picture but exits out. What could be the problem?
jpeg settings... (in 21.9 i used W900 jpeg settings so it should be ok in this version)
Posted by myavu
On 2007-04-25 11:42:18, sesshoumaru wrote:
dear all,
i'm having this problem. am using krio's 21.8 cam driver. Sometimes when i turn on the camera and then shoot the picture, it exits to the standby mode. It doesn't say saving after taking picture but exits out. What could be the problem?
There was a bug in that driver... Try 21.8 Fixed
Posted by Kriomag
On 2007-04-25 11:38:21, primaru wrote:
21.8
[img]...[/img]
4.81
[img]...[/img]
both autofocus and CC
which one to chose???
i think the firs one, in second colors are false, too much red, maybe it looks better but its not real
thats why i stopped using CC in my drivers 
Posted by stingjoel
On 2007-04-25 11:49:42, Kriomag wrote:
On 2007-04-25 11:38:21, primaru wrote:
21.8
[img]...[/img]
4.81
[img]...[/img]
both autofocus and CC
which one to chose???
i think the firs one, in second colors are false, too much red, maybe it looks better but its not real
thats why i stopped using CC in my drivers
v21.8 have no CC....Kriomag, when v21.9 released?
Posted by primaru
@679
like this?...
4.81
21.8
@kriomag
i agree...i think i'll keep 21.8...great job man!!!;)
Posted by 679
@Kriomag
BTW its enoying long exposure in ENM for low light - not only for 21.8
. So I've used Janek "EN tricks" to reduce it but got some exposure bug (too dark pctrs) in normal mode for low light outdoors condition. Is this trick correct for all 21.8 driver modes or may cause unpredictable results?[ This Message was edited by: 679 on 2007-04-25 11:32 ]
Posted by 679
On 2007-04-25 12:11:53, primaru wrote:
@679
like this?...
4.81
21.8
@kriomag
i agree...i think i'll keep 21.8...great job man!!!;)
Realy i wait 4.81 will get worse autofocus ( as it was on some pictures for me) but realy i cant found the difference exept CC is a bit pinkish. So choice up to you
Posted by fezzo
@jonaugust_69
i love your driver, the color is real n very sharp. i love it but sometimes my phone restart when i open camera menu. can you fix that?
my phone is w810i
[ This Message was edited by: fezzo on 2007-04-25 12:40 ]
Posted by jangjr
@jedah_omega.
pls use this forum message as a guidance.
http://forums.se-nse.net/index.php?showtopic=7330
pls read the instruction carefully and do it with a piece of mind.
Cheerz..
Posted by sesshoumaru
On 2007-04-25 11:48:31, Kriomag wrote:
On 2007-04-25 11:42:18, sesshoumaru wrote:
dear all,
i'm having this problem. am using krio's 21.8 cam driver. Sometimes when i turn on the camera and then shoot the picture, it exits to the standby mode. It doesn't say saving after taking picture but exits out. What could be the problem?
jpeg settings... (in 21.9 i used W900 jpeg settings so it should be ok in this version)
jpeg settings? oic.. coz i always have this problem. whenever i wanna take pics, it exits. Sumtimes it's ok, sumtimes it's not ok. So when can we get 21.9?
hehe
Posted by Nirodha
Is anyone going to tell me what "Spot Support" is or not?
Posted by sesshoumaru
On 2007-04-25 11:49:24, myavu wrote:
On 2007-04-25 11:42:18, sesshoumaru wrote:
dear all,
i'm having this problem. am using krio's 21.8 cam driver. Sometimes when i turn on the camera and then shoot the picture, it exits to the standby mode. It doesn't say saving after taking picture but exits out. What could be the problem?
There was a bug in that driver... Try 21.8 Fixed
am using 21.8 fixed. wonder why it still have the problem...
Posted by Kriomag
On 2007-04-25 14:22:05, sesshoumaru wrote:
am using 21.8 fixed. wonder why it still have the problem...
21.9 will be released on days, now try to replace this lines:
SET_JPEG_MAX=06 02 00 0D !1 !0 #CMD_END;
SET_JPEG_MIN=06 02 00 0F !1 !0 #CMD_END;
SET_JPEG_AVG=06 02 00 11 !1 !0 #CMD_END;
SET_JPEG_QUALITY= $p1 0e
$c1 01
$s2 59
#SET_JPEG_MIN(00,01)
$cx
07 02 00 13 $w2 $w2 $w2 #CMD_END;
seq_set_prop_5_0=$z0 $p1 0e
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s6 00;
seq_set_prop_5_1=$z0 $p1 0e
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s6 01;
...with original driver lines (4.5/5.3)
but remembet to add the higlighted parts peace![ This Message was edited by: Kriomag on 2007-04-25 13:32 ]
Posted by jonaugust_69
To @Mr.Kája and @fezzo
Try this: Kriomag_v21.8_CCkopritis_CID49__Other_modification_by_Jonaugust_69
http://rapidshare.com/files/2[....]dification_by_Jonaugust_69.zip
or
Kriomag_v21.8_CCkopritis_CID49__R2B001__modification_by_Jonaugust_69
http://rapidshare.com/files/2[....]dification_by_Jonaugust_69.zip
[ This Message was edited by: jonaugust_69 on 2007-04-25 13:48 ]
Posted by sesshoumaru
On 2007-04-25 14:30:31, Kriomag wrote:
On 2007-04-25 14:22:05, sesshoumaru wrote:
am using 21.8 fixed. wonder why it still have the problem...
21.9 will be released on days, now try to replace this lines:
SET_JPEG_MAX=06 02 00 0D !1 !0 #CMD_END;
SET_JPEG_MIN=06 02 00 0F !1 !0 #CMD_END;
SET_JPEG_AVG=06 02 00 11 !1 !0 #CMD_END;
SET_JPEG_QUALITY= $p1 0e
$c1 01
$s2 59
#SET_JPEG_MIN(00,01)
$cx
07 02 00 13 $w2 $w2 $w2 #CMD_END;
seq_set_prop_5_0=$z0 $p1 0e
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s6 00;
seq_set_prop_5_1=$z0 $p1 0e
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s6 01;
...with original driver lines (4.5/5.3)
but remembet to add the higlighted parts peace!
[ This Message was edited by: Kriomag on 2007-04-25 13:32 ]
thanx krio!! will definitely try. hehe
Posted by GsS 7tr
@Anyone
Can someone tell me what I need to change so I can activate or desactivate EM with the Pict. Quality Option in 4.81?
NORMAL=Default
FINE= EM
THanKS
Posted by Milu
In the settings U've got picture quality and there U can choose that..
/sorry for my english
Posted by GsS 7tr
@Milu
That's on Krio's 2.8, but in 4.8 the pict quality is set to change CC.
What I want to know is how to change that feature on the driver.
THanKS
Posted by Raiderski
@Kriomag
leave this compression settings... it's in camdrv for nothing, quality is calculated in "dynamic way" and it's in range from 75% to 95%. even if you put compression at 90% it doesn't mean that your picture will be saved on this level. i really don't know what SE engineers created :|
oh and...
$s2 5e
07 02 00 13 $w2 $w2 $w2 #CMD_END;
always gives you different quality level (not only 5e)
[ This Message was edited by: Raiderski on 2007-04-25 14:44 ]
Posted by pakraider
On 2007-04-25 13:55:04, Nirodha wrote:
Is anyone going to tell me what "Spot Support" is or not?
its for Spot photometry. it means it will use the middle of the picture to determine exposure levels.. this can be useful if youre trying to shoot something indoors with sunlight in the background coming through a window or something.. without spot, the object will be black/very dark because of the exposure level.
Posted by Mr.Kája
to jonaugust_69: Thx, now, it seems to be working well;) I will test it
Posted by sesshoumaru
On 2007-04-25 14:30:31, Kriomag wrote:
On 2007-04-25 14:22:05, sesshoumaru wrote:
am using 21.8 fixed. wonder why it still have the problem...
21.9 will be released on days, now try to replace this lines:
SET_JPEG_MAX=06 02 00 0D !1 !0 #CMD_END;
SET_JPEG_MIN=06 02 00 0F !1 !0 #CMD_END;
SET_JPEG_AVG=06 02 00 11 !1 !0 #CMD_END;
SET_JPEG_QUALITY= $p1 0e
$c1 01
$s2 59
#SET_JPEG_MIN(00,01)
$cx
07 02 00 13 $w2 $w2 $w2 #CMD_END;
seq_set_prop_5_0=$z0 $p1 0e
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s6 00;
seq_set_prop_5_1=$z0 $p1 0e
$s2 59
$c0 01 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,0F) #SET_JPEG_AVG(00,08) #SET_JPEG_QUALITY $cl
$c0 02 #SET_JPEG_MIN(00,05) #SET_JPEG_MAX(00,08) #SET_JPEG_AVG(00,06) #SET_JPEG_QUALITY $cl
$c0 03 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(00,28) #SET_JPEG_AVG(00,14) #SET_JPEG_QUALITY $cl
$c0 04 #SET_JPEG_MIN(00,50) #SET_JPEG_MAX(00,78) #SET_JPEG_AVG(00,5A) #SET_JPEG_QUALITY $cl
$c0 05 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,54) #SET_JPEG_AVG(01,2C) #SET_JPEG_QUALITY $cl
$c0 06 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(02,1c) #SET_JPEG_AVG(01,cc) #SET_JPEG_QUALITY $cl
$c0 07 #SET_JPEG_MIN(00,00) #SET_JPEG_MAX(01,f4) #SET_JPEG_AVG(01,a4) #SET_JPEG_QUALITY $cl
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,30) #SET_JPEG_AVG(01,EA) #SET_JPEG_QUALITY
$cx $cx $cx $cx $cx $cx $cx $cx
$s6 01;
...with original driver lines (4.5/5.3)
but remembet to add the higlighted parts peace!
[ This Message was edited by: Kriomag on 2007-04-25 13:32 ]
krio, i've checked the 21.8 fixed cam driver. The highlighted command u asked to edit is already there
Posted by fezzo
@jonaugust_69
thanks dude, i hope the bug have been fixed
Posted by Kriomag
On 2007-04-25 16:55:37, sesshoumaru wrote:
krio, i've checked the 21.8 fixed cam driver. The highlighted command u asked to edit is already there
i 've pasted crop from 21.8, now you have to download original 4.5 or 5.3 driver by sony and search the same lines and copy them to 21.8
(and put the highlited commands like it was in 21.
PS. sorry... you also have to change prop...5_0 to be same as 5_1 (so the compression level of jpeg be the same for NORMAL and FINE quality
)
EDIT:
you know what? here you have 21.8 with default JPEG (from 4.5/5.3):
http://www.rogepost.com/n/1123347928
[ This Message was edited by: Kriomag on 2007-04-25 16:25 ]
Posted by ryanchow
From now on...which camdriver is the best since there so many vision of the driver?
Posted by 679
@Kriomag
For a fluorescent bulb light i've got a strips for a pictures of text on white pages. Also in VR mode.
In some early camdrivers i fixed it by inserting line
06 02 00 01 02 21 #CMD_END //50Hz detect
in driver part
seq_init=05 02 00 0B D0 ...
before last line
06 02 00 01 01 55 #CMD_END;
For 21.8 it doesn't work. Any possibility to fix?
Thx...
Posted by hojjat2006
Kriomag when can we get 21.9 ??
in 21.9 in night faster take picture and save or no ?
i work by 21.6
it is very good driver for k750
new version is better or no ???????????
Posted by fezzo
@jonaugust_69
can u modify w550i camera driver like Kriomag_v21.8_CCkopritis_CID49__Other_modification_by_Jonaugust_69? without manual and autofocus
- Base driver: 21.4
- 2 Quality Modes (Picture Quality NORMAL: Default Modes, Picture Quality FINE: EM/ENM/LedEM/LedENM)
- JPEG 89% (for Normal & Fine Picture Quality)
- AE Lock
- Enhanced Modes Support WB Profiles (also with LED)
- CC
this is w550i orginal camera driver
http://rapidshare.com/files/27887527/camdriver0.dat.html
Posted by fezzo
Kriomag_v21.8_CCkopritis_CID49__Other_modification_by_Jonaugust_69
Posted by petitflo01
Here is a pic I took this afternoon in 'Mont Blanc CHAMONIX" Site in france ^^