Posted by tranced
I am still using the 21.7 and when i press the shutter to focus, the 'beep' sound comes first than the camera focuses. Is this normal?
Posted by Vipera ammodytes
On 2007-04-22 22:15:17, tranced wrote:
I am still using the 21.7 and when i press the shutter to focus, the 'beep' sound comes first than the camera focuses. Is this normal?
use 21.8
Posted by tranced
I haven't had time to change the camdriver and haven't had no problems with this one. I just had a doubt about what i posted in my last post. I'll be changing the camdriver by the monday.
Posted by pakraider
Sarmad's 5.5 - the Best so far for the W810
Link: http://www.mediafire.com/?etnj2vmyinc
I think this is the best so far for the W810! at least from my testing
the big difference here is the automatic JPEG compression that Mladen pointed out.
full list of features/information:
// EM/ENM when Macro mode is on
// Manual Focus when Macro is on
// Color Correction in FINE mode
// includes janek's EM and LedEM tweaks
// LED WB set to flourescent
// changed focus mode to Full Range
// automatic JPEG compression
// increased sharpness and contrast
Posted by petitflo01
On 2007-04-22 23:01:51, sarmadgilani wrote:
Sarmad's 5.5 - the Best so far for the W810
Link: http://www.mediafire.com/?etnj2vmyinc
I think this is the best so far for the W810! at least from my testing
the big difference here is the automatic JPEG compression that Mladen pointed out.
full list of features/information:
// EM/ENM when Macro mode is on
// Manual Focus when Macro is on
// Color Correction in FINE mode
// includes janek's EM and LedEM tweaks
// LED WB set to flourescent
// changed focus mode to Full Range
// automatic JPEG compression
// increased sharpness and contrast
Better than Sarmad 9.21 ?
Posted by pakraider
yep, better than 9.21
Posted by petitflo01
oohh interisting, Smooth preview ??? Yes i love it ^^ bit never mind if it not include!
Posted by pakraider
On 2007-04-22 23:20:53, petitflo01 wrote:
oohh interisting, Smooth preview ??? Yes i love it ^^ bit never mind if it not include!
yep, smooth preview is in there
Posted by petitflo01
I'm installing, Thank you so much for your work you're great !
Posted by kopritis
@mariusee
kopritis v6 5,53 Based on 5.3 original sony camdriver
1. Fast Focus at normal light conditions
2. Very sharp images at day and night with ENM
3. Fully automatic Jpeg compression wihout lost quality
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE NIGHT MODE when you "turn ON the Nightmode and Macro ON" Led Supported
6. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
7. Advanced Zoom
http://www.rogepost.com/n/0414316654
[ This Message was edited by: kopritis on 2007-04-22 22:35 ]
Posted by petitflo01
Seems to be good
[ This Message was edited by: petitflo01 on 2007-04-22 22:40 ]
Posted by ezhacker1
On 2007-04-22 23:01:51, sarmadgilani wrote:
Sarmad's 5.5 - the Best so far for the W810
Link: http://www.mediafire.com/?etnj2vmyinc
How do you get zoom in ENM (w/ macro), and i cant get 16x zoom.
Posted by pakraider
On 2007-04-23 01:03:07, ezhacker1 wrote:
How do you get zoom in ENM (w/ macro), and i cant get 16x zoom.
there is no zoom in ENM in this driver.. and the only place where you have the smooth 16x zoom is video recording. when taking pictures, with macro off, you have 4x zoom.
honestly, its just digital zoom.. you can achieve the same thing from the phone itself after taking the shot or with your computer.
Posted by ezhacker1
o, i suppose 16x isnt neccesary but i would like to have zoom in ENM. I like the zoom preview in manual focus mode, but im just missing the zoom in ENM.
Posted by stingjoel
[ This Message was edited by: stingjoel on 2007-04-23 08:47 ]
Posted by GsS 7tr
@ Sarmad
Can you make the 5.5 driver with the Picture Quality option for selecting EM,ENM or Normal Mode for photos, just like Krio 21.8?
THanKS
Posted by AllanJacques
@sarmadgilani
hi! see, if i want to have spot instead of CC what should I do? i want to test your new driver but CC does nothing for me and i like spot a lot... so?
anyway, if you want to do it for me i would be very very very thankfull!
anyway thanks man! great job! up till now, the driver that i liked most was 21.4/4.8 and this new one you said is better than the older so lets try it!
just to remember, one version with spot or teach me to put it on the driver please?
thanks!!!
Posted by Chopz
Some pics taken today with Kriomag's 21.7 CID 49 for W810i. Nice, clear and sharp images. I'm very impressed so far.
Kriomag 21.4 with W810i nightmode shots with MXE-60 flash attachment.
[ This Message was edited by: Chopz on 2007-04-23 04:42 ]
Posted by stingjoel
@Mladen;
I have been tried you camdriver....it's very good if the focus viewfinder become green....but when the camera can't do auto focus, the picture will have noise.
Posted by janek
[ This Message was edited by: janek on 2007-04-23 09:07 ]
Posted by grafyman
hi,for my the best cam driver is kriomag 21.7...the super cam driver..
Posted by pram_zx
@Sarmadgilani & Kriomag
Can both of you change the EM function on Night Mode instead of macro mode ? so...the advantage is...
1. We can take picture using Macro ON and without EM or ENM.(Macro ON, Night Mode OFF)
2. Also We can take picture using Macro ON and with EM or ENM too...( Macro ON, Night Mode On)
-Night Mode ON = Enhance Mode
- Night MOde ON + Macro ON = Enhance Night Mode
Posted by mario06
BLKSnaker's 9.21
Are the best at daytime, so i think we should work on this as the base here's a sample picture with Macro & autofocus taken outside withour sunlight:
here's a picture with Macro & autofocus taken outside without sun and behind a bush:
Posted by stingjoel
On 2007-04-23 06:43:46, janek wrote:
On 2007-04-23 03:25:22, stingjoel wrote:
On 2007-04-22 23:01:51, sarmadgilani wrote:
// includes janek's EM and LedEM tweaks
@Janek;
Is this really your tweaks? because I think I saw this code at paparazy's camdriver, long before you post your tweak
If you got it from Paparazy's camdriver, please give credit to him...thx.
But, I am sorry if I am wrong
K750i CID36 R1CA021 APAC.
[ This Message was edited by: stingjoel on 2007-04-23 02:27 ]
I don't know who is Paparazy and which is him driver, but i don't share my mods in the future in esato. I don't need comments like this.
Bye! Good luck!
[ This Message was edited by: janek on 2007-04-23 06:36 ]
@Janek;
Don't get mad....I told you....I am sorry if I am wrong
So if you want, I tell you again I am sorry
I'll delete my post....ok?
Posted by janek
On 2007-04-23 09:21:30, stingjoel wrote:
On 2007-04-23 06:43:46, janek wrote:
On 2007-04-23 03:25:22, stingjoel wrote:
On 2007-04-22 23:01:51, sarmadgilani wrote:
// includes janek's EM and LedEM tweaks
@Janek;
Is this really your tweaks? because I think I saw this code at paparazy's camdriver, long before you post your tweak
If you got it from Paparazy's camdriver, please give credit to him...thx.
But, I am sorry if I am wrong
K750i CID36 R1CA021 APAC.
[ This Message was edited by: stingjoel on 2007-04-23 02:27 ]
I don't know who is Paparazy and which is him driver, but i don't share my mods in the future in esato. I don't need comments like this.
Bye! Good luck!
[ This Message was edited by: janek on 2007-04-23 06:36 ]
@Janek;
Don't get mad....I told you....I am sorry if I am wrong
So if you want, I tell you again I am sorry
I'll delete my post....ok?
OK! No problem. I see Paparazy modding the 8.54 driver. In 21.8, the 3b value make too short shutter,dark pictures.In 21.8 the 3d value the best i think.
Posted by Kriomag
On 2007-04-23 08:42:34, pram_zx wrote:
@Sarmadgilani & Kriomag
Can both of you change the EM function on Night Mode instead of macro mode ? so...the advantage is...
1. We can take picture using Macro ON and without EM or ENM.(Macro ON, Night Mode OFF)
2. Also We can take picture using Macro ON and with EM or ENM too...( Macro ON, Night Mode On)
-Night Mode ON = Enhance Mode
- Night MOde ON + Macro ON = Enhance Night Mode
in 21.8 EM/ENM you can ON/OFF by selecting NORMAL/FINE picture quality!
so when normal picture quality is selected you have manual focus without EM!
Posted by 679
On 2007-04-20 15:41:28, 679 wrote:
@Kromag
....
....
So, can you point line in 21.8 driver to change focus from infinity to 1.6m for zoom 1.1. And if you know the set of paremetrs: distance/value to be changed. I will try adjust it for me.
Thx...
@Kriomag or mb some advanced driver user...
I am not still about idea to replace in 21.8 zoom=1.1 focus= infinity with value for 1.6m. During weekend i've made tons of test shoots in manual focus mode and found out that the real hyperfocal focus distance (at least for my cam modul) is zoom position 1.9. For this position i have got sharp pictures in very different light and distance situation and results are quite satisfactory.
So, Kriomag, pls point driver part for this parameter to make some tests...
[ This Message was edited by: 679 on 2007-04-23 09:36 ]
Posted by amnesty85
On 2007-04-22 11:12:04, kopritis wrote:
kopritis v3 5,53 Based on 5.3 original sony camdriver
1. Fast Focus at normal light conditions
2. Very sharp images at day and night with ENM
3. JPEG compression algorithm set to automatic for both, NORMAL and FINE mode from mladen750i
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE MODE when you "turn ON the Macro" at FINE MODE from kriomag with boosted EM from Janek's mod
6. ENHANCE NIGHT MODE when you have Macro On and Nightmode On at FINE MODE
7. At the normal mode you have manual focus when you have Macro ON without EN and Nightmode without ENM.
8. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
9. Advanced Zoom
Instructions for Manual Focus:
(Macro ON).
When in range 1.2-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter)
now (when zoom is on) you can adjust focus very precisely (+/-)
when picture is most sharp click half-shutter again (the zoom will go off and EV will be corrected)
and now press shutter to take picture.
http://www.rogepost.com/n/6081647531
Tested on k750i CID49 RED fw R1DB001
[ This Message was edited by: kopritis on 2007-04-22 10:12 ]
Hi
I cant download anything from this site right now :
"Cannot connect to SQL database: Can't create a new thread (errno 35); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug"
Can someone put this driver on other site or on my email? minigram@o2.pl Thanks
Posted by pram_zx
@Kriomag
Yeaah...I know...but I mean is without select to FINE or NORMAL quality.
BTW I like your v21.8 but I found bug, when I take a shot in the morning with sunlight, suddenly the camera mode is jump out to standby screen. Please...fix this...maybe you can add Janek Enhance Mode too? hehehe....
Posted by stingjoel
OK! No problem. I see Paparazy modding the 8.54 driver. In 21.8, the 3b value make too short shutter,dark pictures.In 21.8 the 3d value the best i think.
I use 3b value only for LED ENM and 3d value for ENM & EM and it works fine...have you try it?
Posted by Kriomag
On 2007-04-22 18:23:31, (zalman) wrote:
siema Kriomag
wiem ze jestes polakiem wiec pisze po pl bo nie umiem za bardzo po angielsku..
robisz bardzo fajne drivery..
mam jedna prosbe..
moglbys zrobic mi driver 21.8 tyle ze bazowany na 7.7final jak to masz w wersji 21.6 ??
wydaje mi sie ze jest to lepsze rozwiazanie niz bazowanie na 21.4.
z gory thx.
Sorry ze nie po Angielsku
ale 21.4 jest bazowany na 7.7 final -> wiec 21.8 tez jest
hehe
Posted by myavu
On 2007-04-21 19:52:02, AllanJacques wrote:
I dont know... still seems to me that the best pictures are with 21.4 (4.
...
I too agree...
Posted by jangjr
Hi..there i own a w810i r4e*** firmware. Sorry cant remember.
i m using 21.8 kriomag+short shutter speed + janek LED enm and ENM mod+ improve sharpness and
it give a good result and i luv it.
for increse sharpness i just change 05 from 04 in kriomag 21.8.
In very low light condition the image produce much sharper and without any noise level. While in kriomag 21.8 the image is alil bit darker and by changing the sharpness the light level improve and more like what u see is what u get.
if u'all want it..'ll try to post it somewhere.
cheers.
[ This Message was edited by: jangjr on 2007-04-23 11:08 ]
Posted by norbi_nw
Can you improve the sharpness a bit in 21.8? it would be nice.
@All
when testing a driver, don't shoot only macro pictures. Try to capture landscapes too (then you convince me/all that driver is good)
Posted by kukuh
This is camdrvr from Kriomag with smaller file size (no modification changed,just the file size).
maybe for some1 who have trouble when tranfer big size camdrvr with FAR,,
credit goes to Kriomag....
camdriver0 21.7 (24 KB)
http://www.mediafire.com/?34gv4udwj4y
camdriver0 21.8 (22,7 KB)
http://www.mediafire.com/?5nw2oi0imjn
@mladen: do you think your 6.36 compression method better than others?
give us some comparasion pictures with other driver
_________________
W800i Emea
[ This Message was edited by: kukuh on 2007-04-23 11:40 ]
Posted by jangjr
@norbi
this is what i ve done. hope it works on u too..
open ur driver in notepad
under CHANGE_FOCUS
look for this line
06 02 00 01 04 56 #CMD_END <--ive change it from 04 to 05
under seq_init
look for this line
06 02 00 01 04 56 #CMD_END <--- ive change it from 04 to 05
under seq_set_prop_a_1
look for 06 02 00 01 04 56 #CMD_END <---- change 04 to 05
after the next 2 line
look for
06 02 00 01 04 56 #CMD_END <------change 04 to 05
under seq_set_prop_a_2
$c8 01
06 02 00 01 10 61 #CMD_END
06 02 00 01 02 56 #CMD_END <--- dont change this line
$cl
06 02 00 01 00 61 #CMD_END
06 02 00 01 04 56 #CMD_END <--- change 04 to 05
thats all and save it.
cheerz..
Posted by petitflo01
On 2007-04-23 11:54:54, myavu wrote:
On 2007-04-21 19:52:02, AllanJacques wrote:
I dont know... still seems to me that the best pictures are with 21.4 (4.
...
I too agree...
/Myavu = myavi ???
Posted by Raiderski
can anyone compare Mladen's compression with others? i don't have cable for couple of days so i can't myself
Posted by myavu
/Myavu = myavi ???
Myavu
Posted by Vipera ammodytes
Kriomag 21.8 vs Mladen 6.36
ENM
21.8
6.36
21.8
6.36
daylight
21.8
6.36
i used automatic settings for both
Posted by petitflo01
Lol cause Miyavi is a Japanese songer ^^
Posted by myavu
On 2007-04-23 15:14:36, petitflo01 wrote:
Lol cause Miyavi is a Japanese songer ^^
cool - this is myavu myavu from Tom Cat!!!
Posted by petitflo01
ok ok ^^
Posted by jonaugust_69
TEST k750@W800 FW R1BC002 CID49
camera_driver: kopritis-v6+original+5.3mod
camera_driver: Kriomag_v21.8_CC_kopritis_CID49__tunned_by_Jonaugust_69_.zip
camera_driver: Kriomag_v21.8_fixed
[ This Message was edited by: jonaugust_69 on 2007-04-23 15:54 ]
Posted by mladen750i
@kukuh
No, i don`t think it`s better, but have a very usefull thing like a smaler picture size with
totaly same quality in comparsing with compression wich resulting biger pictures size, and
no chance for human eyes to see the differences.... Tonight, i will make compare test...
@Raiderski
See last words^^^
For now, see this two pictures:
http://camdriver0.farvista.net/Mladen_v6.36.JPG
http://camdriver0.farvista.net/Kriomag_v21.8.JPG
Posted by Chopz
On 2007-04-23 18:15:11, mladen750i wrote:
@kukuh
No, i don`t think it`s better, but have a very usefull thing like a smaler picture size with
totaly same quality in comparsing with compression wich resulting biger pictures size, and
no chance for human eyes to see the differences.... Tonight, i will make compare test...
@Raiderski
See last words^^^
For now, see this two pictures:
http://camdriver0.farvista.net/Mladen_v6.36.JPG
http://camdriver0.farvista.net/Kriomag_v21.8.JPG
Your links don't work mladen. Takes me to a totally different website.
Posted by mariusee
On 2007-04-22 23:33:22, kopritis wrote:
@mariusee
kopritis v6 5,53 Based on 5.3 original sony camdriver
1. Fast Focus at normal light conditions
2. Very sharp images at day and night with ENM
3. Fully automatic Jpeg compression wihout lost quality
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE NIGHT MODE when you "turn ON the Nightmode and Macro ON" Led Supported
6. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
7. Advanced Zoom
http://www.rogepost.com/n/0414316654
[ This Message was edited by: kopritis on 2007-04-22 22:35 ]
thanks a lot..
you are realy fast!!!
now i will test it... i'll be back with pictures
[ This Message was edited by: mariusee on 2007-04-23 17:42 ]
Posted by jdthegr8kd
@Chopz
try to copy the link and paste it in ur browser address bar and press enter
it's working
Posted by Chopz
@ jdthegr8kd
Thanks. It worked that way.
Mladen's pic is brighter than Kriomags but they are both blurry looking.
Posted by Raiderski
thanks for info Mladen i appreciate your work. i rembember smaller size trick from GxG drivers. exactly this same automatic compression was there because of wrong calls (without SET_) to SET_JPEG_ macros i think.
by the way... do you have any theory what for are quantization tables defined in camdrv? i'm asking because they aren't used and looks like in fact quantization tables for compression are created dynamic somehow for every photo and are different for different photos (on same camdrv).
greets