Super camera driver for k750/w800/w810

Posted by kopritis

On 2007-04-15 19:40:41, GsS 7tr wrote:
@Kopritis

Are you going to release a new driver?
If not, can you make your last driver without CC?
THX

Based on 5.3 without CC

1. Fast Focus
2. Very sharp images at day and night with ENM
3. 87% compression at fine mod and 75% compression at normal mod
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE NIGHT MODE when you "turn ON the Macro"
6. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
7. Advanced Zoom

http://www.rogepost.com/n/3675466683

Posted by primaru
@kriomag
i know it was an older request...but can you put on 21.7 16X zoom???
we do have that on rec mode but why not for pictures???
for us...the zoom-ers...

...plz

Posted by krogoth
Anybody knows how to port night mode from 8.53 to 8.54?

Posted by pakraider
Sarmad's 5.1 - based on W810 stock 4.5 and Kriomag 21.7

I think this is the best one yet for the W810.. lets see what you guys think..also, I set sharpness to 5 but I'm still not sure if 4 is better.. but it seems 5 is a bit sharper but not sure.. lets see your test shots and find out

Download Link:
http://www.mediafire.com/?5mxxxoj0nju

[ This Message was edited by: sarmadgilani on 2007-04-15 20:20 ]

Posted by Kriomag
Difference between EM and ENM:

Normal Mode:

EM (Normal Mode + Macro):

ENM (Night Mode + Macro):

All clear now?

EM has max exposure time 1/2 sec so if your hands are steady you can take nice pics

with ENM its impossible couse exposure time is way too long...

Posted by Kriomag

On 2007-04-14 21:11:47, paparazy wrote:
Olá amigos as modificaçőes do super driver é como chover no molhado! risos

eu năo compreendo que whay vocę está dizendo, fala por favor o inglęs: P

Posted by Mr.Kája
Ok, I don't want to argue...I was talking about good light conditions...I think, in lower EV, ENM is not so far...just look, what I'm talking about, these two pics:

This is taken by EM in 0EV

This is taken by ENM in 0EV

I don't see many differences...both had quite same time...in darker room, the difference is of course bigger, but you can change EV at ENM to make it darker. So, that's what I was talking about, that maybe is easier to live without EM than without macro including fast shots. How you saw in last photos from car, with infinite focus and without EM, you can catch nice emergency photos. I hope, I know what I'm talking. When I wanted from Kopritis superzoom driver without em, nobody else, expect him react. Now, many people here say the same. Quite strange for me:) So maybe the best solution is to make driver, where you can EM put on and off;)

[ This Message was edited by: Mr.Kája on 2007-04-15 21:52 ]

Posted by Kriomag

On 2007-04-15 22:49:18, Mr.Kája wrote:
maybe the best solution is to make driver, where you can EM put on and off;)

i'll think about it

Posted by Kriomag

On 2007-04-14 21:24:32, Highlaj wrote:
@Kriomag Why is quality at 87 and not 89? What happends if you put it to 100, would it be very volatile?

if you set 100 your camera will exit to desktop, no picture will be saved... i changed to 87% because even with 89 sometimes get to desktop...

Posted by Raiderski
compression quality declared in camdrv is much more complicated than just simple one value. we should put some effort to search how in fact compression and quality really work. there are only some things we know and nothing more...

Posted by wowow
i accidently deleted camdriver0.dat then i tried to renew it by replacing the new driver but although i am doing everything right as shown in the usage of far manager, it doesnt seem to be written there.
1) i open far manager
2) run plugin
3) i plugin the phone and it is being recognized
4) i go the system/camera directory( since i deleted old driver, it seems empty)
5) i choose the new driver and drag&drop it to the directory
6) process works and it put the new file to directory
7) after going to upper menu it asks me to close ctf loader

i close it and quit the far manager
but after opening the phone, camera doesnt work cuz system/camera directory still seems empty.
something confusing, what's wrong with that?

Posted by petitflo01

On 2007-04-15 21:04:35, sarmadgilani wrote:
Sarmad's 5.1 - based on W810 stock 4.5 and Kriomag 21.7

I think this is the best one yet for the W810.. lets see what you guys think..also, I set sharpness to 5 but I'm still not sure if 4 is better.. but it seems 5 is a bit sharper but not sure.. lets see your test shots and find out

Download Link:
http://www.mediafire.com/?5mxxxoj0nju

[ This Message was edited by: sarmadgilani on 2007-04-15 20:20 ]

Is there smooth previewer ???

Posted by Mr.Kája
wowow: its really stupid from me, but maybe it will help you. in lfs/setting/camera (or something like it) leave it open ane in second screen, choose camcoder (carrefully, the name must be same, but I know, you know) and instead of drag and drop try to you F5 button and copy. Then go back back...click yes and get out battery and get in battery...you know. I mean, I had problems with drag and drop, till I started to use F5..strange (like me:)), but I think, problem is not in this.

Posted by pakraider

On 2007-04-16 00:20:56, petitflo01 wrote:

Download Link:
http://www.mediafire.com/?5mxxxoj0nju

[ This Message was edited by: sarmadgilani on 2007-04-15 20:20 ]

Is there smooth previewer ???

Here you are:

Sarmad's 5.1 driver - fixed
http://www.mediafire.com/?0zzrlnxkmey

this also should have better sharpness, try it out

[ This Message was edited by: sarmadgilani on 2007-04-16 00:42 ]

Posted by AllanJacques

On 2007-04-16 01:38:16, sarmadgilani wrote:

On 2007-04-16 00:20:56, petitflo01 wrote:

Download Link:
http://www.mediafire.com/?5mxxxoj0nju

[ This Message was edited by: sarmadgilani on 2007-04-15 20:20 ]

Is there smooth previewer ???

@sarmadgilani

this last version, what did you change? jus smooth preview? the word fix got me thinking... what was that you change? increased sharpness too?

[ This Message was edited by: AllanJacques on 2007-04-16 01:03 ]

Posted by n0brega
Hi there! I think @Kriomag's v21.7 camdriver its probably one of the best camdrivers around for sure! The only thing I'd Like to ask was if maybe he could take a look at the v8.54 tunned by paparazi and speedup ENM like he did with that tunned version of chengrong's supercam driver!
With ENM speedup on @Kriomag's driver, it would just be fabulous!

Regards, n0brega

Posted by mladen750i

On 2007-04-15 18:42:09, kopritis wrote:

Yes it have warning... but if you want to stop warning you open the camdriver0.dat and delete the GET_SENSOR_VERSION

Thanks kopritis....

Posted by pakraider

On 2007-04-16 02:02:16, AllanJacques wrote:

this last version, what did you change? jus smooth preview? the word fix got me thinking... what was that you change? increased sharpness too?

[ This Message was edited by: AllanJacques on 2007-04-16 01:03 ]

5.1 uses the feature set of kriomag's 21.7 .. the first link i posted for it had a bug where it didnt reset the camera properly after taking a shot.. since i was going to issue a new link anyway, i tweaked the sharpness code and i think it will look better now.

Posted by Kriomag

On 2007-04-15 23:52:35, wowow wrote:
i accidently deleted camdriver0.dat then i tried to renew it by replacing the new driver but although i am doing everything right as shown in the usage of far manager, it doesnt seem to be written there.
1) i open far manager
2) run plugin
3) i plugin the phone and it is being recognized
4) i go the system/camera directory( since i deleted old driver, it seems empty)
5) i choose the new driver and drag&drop it to the directory
6) process works and it put the new file to directory
7) after going to upper menu it asks me to close ctf loader

i close it and quit the far manager
but after opening the phone, camera doesnt work cuz system/camera directory still seems empty.
something confusing, what's wrong with that?

i dont like far, if there was plugin for total commander then maybe...

i use myphoneexplorer for uploading camdriver0.dat (ofc with patch that redirects driver to phone memory: other\\drivers\\camera

)

Posted by yaneeque
@Kriomag
Hay. Kriomag i think your mod of camera driver one of the best =)
I have only 1 problem: WHEN I TAKE PHOTO WITH LED ON IN DARK PLACES, MY FOTO HAVE MANY BLUE COLOR, NOT REAL??? HOW I CAN FIX THEN?

[ This Message was edited by: yaneeque on 2007-04-16 07:52 ]

Posted by Kriomag

On 2007-04-16 08:51:16, yaneeque wrote:
@Kriomag
Hay. Kriomag i think your mod of camera driver one of the best =)
I have only 1 problem: WHEN I TAKE PHOTO WITH LED ON IN DARK PLACES, MY FOTO HAVE MANY BLUE COLOR, NOT REAL??? HOW I CAN FIX THEN?

just select other White Balance Profile

(maybe cloudy?)

Posted by wendy04

On 2007-04-16 08:28:31, Kriomag wrote:

i use myphoneexplorer for uploading camdriver0.dat (ofc with patch that redirects driver to phone memory: other\\drivers\\camera

)

hi, what is the meaning of 'ofc' and where can i find this patch ?

thanks.

Posted by stingjoel
@Kriomag;

Could you speed up your camdriver's EM & ENM like paparazy's camdriver?
Paparazy's EM & ENM is fast

[ This Message was edited by: stingjoel on 2007-04-16 11:39 ]

Posted by Kriomag

On 2007-04-16 12:38:59, stingjoel wrote:
@Kriomag;
Could you speed up your camdriver's EM & ENM like paparazy's camdriver?
Paparazy's EM & ENM is fast

give me the link so i can test it my self

if it is really faster and no more noise i will try to implement it to my driver.

Posted by Kriomag

On 2007-04-16 12:26:49, wendy04 wrote:
hi, what is the meaning of 'ofc' and where can i find this patch ?

ofc 'means' ofcourse

i downloaded patch for my firmware from topsony.com

Posted by hellvy

On 2007-04-15 20:07:51, kopritis wrote:

On 2007-04-15 19:40:41, GsS 7tr wrote:
@Kopritis

Are you going to release a new driver?
If not, can you make your last driver without CC?
THX

Well, may be it's too many request.. but Kopritis, can you make your 5.35 driver without CC and EM (but still ENM) ?

Posted by stingjoel
@kriomag;
take a look at latest page of hybrid camera driver part 2...I am on mobile, so I can't provide you the link.

Posted by norbi_nw

On 2007-04-13 05:47:27, sesshoumaru wrote:
@guguly

sorry. actually I'm asking about if the LED of k750i can be set a flashlight rather than continuously light up when taking pic. For instance, just like nokia's N70, where when in poor lightning condition, u can have flashlight instead of the LED constantly light up. This is quite annoying when taking someone pics. Hope can help. Thanx

OMG! I was thinking about the same thing but before reading this post!
My idea was the same: turning LED on, instead of a continuous light, the LED would only flash when we press the shutter half way down (when focusing). This would be a great mod. What do you think guys??

Posted by n0brega
@Kriomag

On 2007-04-16 04:15:27, n0brega wrote:
@stingjoel Sure np!

There you go!

http://www.rogepost.com/n/5285248787

Thats v8.54 made by Chengrong and tunned by paparazy!
Actualy it was my request in the 1st place but probably on the wrong place and to the wrong person

Regards, n0brega

Posted by 679

On 2007-04-15 20:07:51, kopritis wrote:

On 2007-04-15 19:40:41, GsS 7tr wrote:
@Kopritis

Are you going to release a new driver?
If not, can you make your last driver without CC?
THX

Seems your driver hasn't problem with focusing for MACRO=ON and distance 1-2m (like Krio 21.5). But sometimes for close distance focus is "missed". I think it is bcs of Fast Focus. Can you point the lines in driver to change it for Normal Focus?

[ This Message was edited by: 679 on 2007-04-16 15:17 ]

Posted by norbi_nw
So krio? Can you mod the LED as i asked? It would be soo cool!

Posted by kopritis

On 2007-04-16 16:08:16, 679 wrote:

Seems your driver hasn't problem with focusing for MACRO=ON and distance 1-2m (like Krio 21.5). But sometimes for close distance focus is "missed". I think it is bcs of Fast Focus. Can you point the lines in driver to change it for Normal Focus?

[ This Message was edited by: 679 on 2007-04-16 15:17 ]

do you want the driver without manual focus?

Posted by kopritis

On 2007-04-16 14:10:20, hellvy wrote:

Well, may be it's too many request.. but Kopritis, can you make your 5.35 driver without CC and EM (but still ENM) ?

5.53 v1 without CC and EN

1. Fast Focus
2. Very sharp images at day and night with ENM
3. 87% compression at fine mod and 75% compression at normal mod
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE NIGHT MODE when you "turn ON the Nightmode and Macro ON"
6. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
7. Advanced Zoom

dowload: http://www.rogepost.com/n/3877907205

Posted by Kriomag

On 2007-04-16 16:36:00, norbi_nw wrote:
So krio? Can you mod the LED as i asked? It would be soo cool!

i know it would be cool but its impossible to enable led from driver level

i've tried that but it just wont work... (maybe chengrong will find the way? :/)

Posted by 679

On 2007-04-16 17:06:40, kopritis wrote:

do you want the driver without manual focus?

Realy - no. But I want in MACRO=ON and ZOOM=1.0 (Autofocus) to have not "fast focus" but normal focus - as i remember there is such options in focus features set...

[ This Message was edited by: 679 on 2007-04-16 16:46 ]

Posted by mariusee
macro manual focus with kopritis last driver

manual focus to infinit with the same driver

Posted by kopritis

On 2007-04-16 17:45:29, 679 wrote:

Realy - no. But I want in MACRO=ON and ZOOM=1.0 (Autofocus) to have not "fast focus" but normal focus - as i remember there is such options in focus features set...

[ This Message was edited by: 679 on 2007-04-16 16:46 ]

the driver have normal autofocus in zoom 1.0 but the problem of you is not the fast autofocus, it's the next lines...

open the camdriver0.dat with a notepad ang go to find this:
seq_set_prop_7_0=06 02 00 01 28 03 #CMD_END
05 02 00 08 3C #CMD_END
06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
-------------------------------------------------------------------------
and replaced with this:
seq_set_prop_7_0=06 02 00 01 28 03 #CMD_END
05 02 00 08 3C #CMD_END
06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;

Posted by Kriomag

On 2007-04-16 17:45:29, 679 wrote:
I want in MACRO=ON and ZOOM=1.0 (Autofocus) to have not "fast focus" but normal focus - as i remember there is such options in focus features set...

it wont make difference... autofocus with manual focus mode (1.0) have problem with focusing, no metter what focus mode is selected (except only macro) im trying to fix this (in 21.7 its better i think but not as good as without manuan focus enabled)...

EDIT:
damn, i think i've made it autofocus is working likie a dream (in 1.0 with manual focus mode). i just tested it with same test where 21.5 and 21.6 failed too many times, and now it focus every time for 10 tries )
NOPE

it still work not as good as normal autofocus... damn it!

but it works good when only macro range scanning is set :/ i will leave it that way (only macro range scanning when macro is on...)

btw. i've rebuilded entire driver in 21.8

now EM/ENM and Super manual focus are enabled only when Picture quality is set to FINE (with NORMAL picture quality you have normal driver with zoom in all modes) - yes, no longer CC...

[ This Message was edited by: Kriomag on 2007-04-17 09:28 ]

Posted by paparazy
hi all

new driver v1.60 paparazy
- noise, max shapness, + fast shot night led

link: http://rapidshare.com/files/26332632/drivers_paparazy.zip.html

Posted by kopritis
thanks Kriomag!

Posted by Mr.Kája
Kriomag: Nice sounds, maybe you could leave super focus and macro+night as a enm and in second mode just add em version...but I haven't tested yet, I'm looking forward to it:-P

Posted by yong24s
Hi, just a suggestion

Is it possible to use scenes to map a feature?

Example

Scene 1.0 - No CC

Scene 1.1 - With CC

If so, some other function can use the FINE/Normal pic for on off

Posted by 679
@Krio & Kopritis
Thx a lot for your constructive answers!
I admire both of your efforts and results in camdriver modding. I've tested more then 30 drivers and can see clear that in 4-5 drivers modders have achivied now very close to maximum results we can ever get from our cam module. And really the best driver its compromise between opposite features so its up to you, me and anybody which one is the best. Sorry for philosophizing.

P.S. Seems in closed topic - "Hybrid camera Driver ..." it was a link may be by Chehrong - it was investigation and comparison of potential possibilities of K750 camera module with some other digital cameras. It was very useful for me - to understand what maximum result can we get.

Posted by 679
@Kriomag.
You've sound good news about autofocus. Can your upload my lovely (i even don't no why) fixed 21.5.
Or point which lines and how to be editted. Thx!

[ This Message was edited by: 679 on 2007-04-16 17:53 ]

Posted by hellvy
Oh, thank you very much for your (very fast post) 5.53 driver kopritis

Today is my camera driver day. Once i changed camera driver to kriomag's 21.5 driver few days ago for manual focus and realized that enhance mode when macro on is not for me (i can't hold the phone still even for just 1/2 sec -_-', so i prefer this mode as a choice)

Today i changed the driver to your 5.35 without CC because i just stupid enough to confused CC with EM. So i changed my driver again to jonaugust_69's kriomag's 2.17 mod without EM which in fact, without ENM (which i need it) too.

i decided to back to your 5.35 without CC before asking for your kind to re-mod your driver for me. And here it is, the 4th driver install for today

Think about my phone is k750i cid49 red which need extra procedure for changing driver and every time, i feel like holding my phone on a thread 3 meters above the floor

Thank you again kopritis. And kriomag, chengrong and all other modders too for your wonderful works

[ This Message was edited by: hellvy on 2007-04-16 18:25 ]

Posted by mariusee
as 679 said, the developement of this driver almoust has reach the top, only problem now is just fixing the fast focus mode.

@kopritis
if you fix the fast focus mode on your driver, almoust have the perfect one... and leave it with no CC... you don't need it, you have white balance modes who do their job very well... the Enhanced Night Mode is great. also you don't need an Enhanced Mode only.
and the manual focus with zoom preview is very usefull...

tnx to all of you work on this driver... great job

Posted by Kriomag

On 2007-04-16 18:48:04, 679 wrote:
@Kriomag.
You've sound good news about autofocus. Can your upload my lovely (i even don't no why) fixed 21.5.
Or point which lines and how to be editted. Thx!

in 21.8 i replaced entire:

"seq_set_prop_7_0=...;"

and

"seq_set_prop_7_1=...;"

with default code (from 5.3 or 4.5). Now autofocus works great

tomorrow i think i'll finish 21.8 and post link here

Posted by Kriomag
how about this:

21.8 Features:

Super Manual Focus - enabled only when Macro is ON (in both FINE & NORMAL picture quality)

EM/ENM/LedEM/LedENM - enabled only when picture quality is set to FINE (NORMAL = default modes)

...so you can shot with manual focus without EM/ENM and/or take EN/ENM pictures with zoom

i wiped out CC

WB profiles are enough for me:)

now im working on details, if driver will pass every test i will post it soon (maybe tomorrow...)

[ This Message was edited by: Kriomag on 2007-04-16 19:26 ]

Posted by norbi_nw
Well i hope cheng can find a way to mod the LED. But i'm not satisfied with the EM... sometimes we need the focusTOinfinity function, but because of macro, EM is on, and that's "bad" sometimes (i mean if you use the focus to infinity, you use it for a reason, and that reason is: you wanna get FAST shots). You could change EM from macro key, to nightmode key (if EM is better then nightmode).

Posted by Kriomag

On 2007-04-16 20:16:48, norbi_nw wrote:
i'm not satisfied with the EM... sometimes we need the focusTOinfinity function, but because of macro, EM is on, and that's "bad" sometimes (i mean if you use the focus to infinity, you use it for a reason, and that reason is: you wanna get FAST shots). You could change EM from macro key, to nightmode key (if EM is better then nightmode).

LOL?

read my post above... hehe

[ This Message was edited by: Kriomag on 2007-04-16 19:24 ]