Posted by Kriomag
On 2007-04-11 20:04:26, kopritis wrote:
1rst of all a BIG THANKS to Kriomag!
i think 1st of all BIG thx to chengrong
second to me 
hehe
Posted by kopritis
a second test of my mod 5.35v2 ((see page 103))
full size pics download: http://www.rogepost.com/n/3157102070
1pic. macro on, nightmode off, led off (enm enabled), ev0.0
2pic. macro on, nightmode on, led off (enm enabled), ev0.0
3pic. macro on, nightmode off, led on (enm enabled), ev0.0
4pic. macro off, nightmode on, led on (enm disabled), ev0.0
all this pictures are in the zip file to download...
P.S my walls at my room is blue...
[ This Message was edited by: kopritis on 2007-04-11 19:31 ]
Posted by Kriomag
On 2007-04-11 12:55:33, AllanJacques wrote:
could you tell me what was causing the instability?
stupid mistake
i've forgot to write " $cx; " in night property... lol
Posted by AllanJacques
thanks! by the way, do you check your in box Kriomag?????
Posted by GsS 7tr
@sarmadgilani
does Sarmad 4.8 or 5.01 supports WB Profiles with EM?
Posted by mikeypants
I seem to get much sharper images with Kriomag's drivers for my W810i than I do with the 4.5 based drivers... Interesting.
@Kriomag, thank you so much for giving me the option to disable CC; my pictures look much nicer now in certain lighting when I am able to turn it off.
[ This Message was edited by: mikeypants on 2007-04-11 22:06 ]
Posted by duysmil
mikeypants
what the 3 versions of kriomag driver you use?
cid 36
cid 59
or other cid59 for db.....
Posted by P&A
Hi! My nick Pilya. At once I apologize for my English as I write by means of the translator
The Driver with color correction it was developed only for K750 with CID49. For other models it{he} is not necessary, or other correction is necessary.
Posted by AllanJacques
@ All specially Kriomag and sarmadgilani
where is the option of smoother preview?
i really would really like to remove it form other drivers, since it gives me blurry pics.
thanks for your atention!!!
Posted by pakraider
On 2007-04-11 22:18:35, GsS 7tr wrote:
@sarmadgilani
does Sarmad 4.8 or 5.01 supports WB Profiles with EM?
Both 4.8 and 5.01 have SPOT and WB profiles with EM.
On 2007-04-12 00:28:33, AllanJacques wrote:
@ All specially Kriomag and sarmadgilani
where is the option of smoother preview?
i really would really like to remove it form other drivers, since it gives me blurry pics.
thanks for your atention!!!
Towards the beginning of the driver, you'll see lines like cam_vf_sync , etc.. just use these values to replace whats in there toget default settings back:
cam_data_offset=2;
cam_vf_sync=7;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9;
[ This Message was edited by: sarmadgilani on 2007-04-12 00:59 ]
Posted by pakraider
On 2007-04-12 00:00:21, P&A wrote:
Hi! My nick Pilya. At once I apologize for my English as I write by means of the translator
The Driver with color correction it was developed only for K750 with CID49. For other models it{he} is not necessary, or other correction is necessary.
Hey Pilya, nice to see you here! I think your color correction works great on the W810 and gives better results.
Posted by mikeypants
On 2007-04-11 23:50:24, duysmil wrote:
mikeypants
what the 3 versions of kriomag driver you use?
cid 36
cid 59
or other cid59 for db.....
For Kriomag's v21.6, I used the file for CID49. It is wonderful!
If you have any more questions, please ask away.
Posted by pakraider
On 2007-04-12 02:12:31, mikeypants wrote:
On 2007-04-11 23:50:24, duysmil wrote:
mikeypants
what the 3 versions of kriomag driver you use?
cid 36
cid 59
or other cid59 for db.....
For Kriomag's v21.6, I used the file for CID49. It is wonderful!
If you have any more questions, please ask away.
cool.. W810 folks, lets test out 21.6 cid49 a bit more.. if it works great, then no need for the 4.5 based drivers and we can just stick to Kriomag's cid49 ones.
Posted by AllanJacques
On 2007-04-12 01:57:00, sarmadgilani wrote:
On 2007-04-11 22:18:35, GsS 7tr wrote:
@sarmadgilani
does Sarmad 4.8 or 5.01 supports WB Profiles with EM?
Both 4.8 and 5.01 have SPOT and WB profiles with EM.
On 2007-04-12 00:28:33, AllanJacques wrote:
@ All specially Kriomag and sarmadgilani
where is the option of smoother preview?
i really would really like to remove it form other drivers, since it gives me blurry pics.
thanks for your atention!!!
Towards the beginning of the driver, you'll see lines like cam_vf_sync , etc.. just use these values to replace whats in there toget default settings back:
cam_data_offset=2;
cam_vf_sync=7;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9;
[ This Message was edited by: sarmadgilani on 2007-04-12 00:59 ]
Thank you!
Posted by pakraider
I'm still getting blurry shots with Kriomag's drivers.. the way I feel is, phones that can work great with 7.7 based drivers are amazing.. some of us just have to stick with 4.5 but we can still get good shots that way.
Posted by AllanJacques
On 2007-04-12 03:03:34, sarmadgilani wrote:
I'm still getting blurry shots with Kriomag's drivers.. the way I feel is, phones that can work great with 7.7 based drivers are amazing.. some of us just have to stick with 4.5 but we can still get good shots that way.
I agree with you, but, have you tested 7.7fedited? before yours, was one of the best drivers i tested...
Posted by pakraider
On 2007-04-12 03:05:21, AllanJacques wrote:
I agree with you, but, have you tested 7.7fedited? before yours, was one of the best drivers i tested...
Yep I agree, 7.7fedited was pretty good, but with the EM/ENM mods and stuff, I found 4.5 to give a better picture.
How about the W810 folks compare when our phones were made to see if there's a difference there? Take out the battery and there's a white sticker next to the SIM card that has the IMEI and then in smaller print, you'll see something like:
06W44 .. which is mine, meaning it was made in the 44th week of 2006, so its a recent one.
Posted by mikeypants
My W810i is 06W40.
Posted by AllanJacques
06W38... older than yours, but still new i think...
by the way, seems that Kriomag's 21.4 without smooth preview gives me amanzing results! pictures will come soon!!!
Posted by stingjoel
Is this picture sharp & good enough? it's taken from v21.5 with small modification...
Macro ON + Night mode ON.
Daylight.
[ This Message was edited by: stingjoel on 2007-04-12 03:59 ]
Posted by AllanJacques
@StingJoel
what modifications?
@sarmadgilani and Kriomag
strange, kriomags 21.4 gives me the best results of all, but is a little yellow in enm... anything can be done to solve just this issue? just this one and a perfect driver arises for me...
anyway, macro on gives me some yellow... what do you think?
Posted by stingjoel
On 2007-04-12 04:22:13, AllanJacques wrote:
@StingJoel
what modifications?
Actually I change the JPEG setting from v21.5 with BLKSNAKER's camdriver v9.0 (it was ZUZA by GXG and tweaked by BLKSNAKER)...
Posted by pakraider
On 2007-04-12 04:22:13, AllanJacques wrote:
@StingJoel
what modifications?
@sarmadgilani and Kriomag
strange, kriomags 21.4 gives me the best results of all, but is a little yellow in enm... anything can be done to solve just this issue? just this one and a perfect driver arises for me...
anyway, macro on gives me some yellow... what do you think?
hmm.. well ive heard of the greenish shots coming from EM.. the color correction in 5.01 takes care of the greenish shots for me, and I often use EV +.07 or so with Macro on to fix any color distortion. maybe give that a try?
and thanks for the test AllanJacques, so it seems the smooth preview does give us blurrier shots after all.
[ This Message was edited by: sarmadgilani on 2007-04-12 04:01 ]
Posted by mladen750i
@Sarmadgilani
Bluriness is result of ...56 #CMD_END line, apscent of #GET_SENSOR_VERSION command in CID49 phone, zooming range, unsecssesfully zoomed object of shot because of bad viewfinder... Try to consider this, maybe solve the problem.
Posted by pakraider
On 2007-04-12 05:25:40, mladen750i wrote:
@Sarmadgilani
Bluriness is result of ...56 #CMD_END line, apscent of #GET_SENSOR_VERSION command in CID49 phone, zooming range, unsecssesfully zoomed object of shot because of bad viewfinder... Try to consider this, maybe solve the problem.
hmm, i'm not quite sure what you meant. are you referring to the sharpness line in seq_init? ( 06 02 00 01 05 56 #CMD_END ).. I keep that at 5 always.. it seems my phone and some others can't handle 6 for sharpness.
The W810's stock 4.5 does not have a GET_SENSOR_VERSION command.. so, are you suggest ng we remove this command from the drivers we try? I believe it gets called by seq_init..
Posted by pakraider
ok, I think this is a good driver for W810 users..
I'm getting good colors and sharp pictures, and don't see any greenish/yellowish tint in Enhanced Mode.
Tip: under very low light it helps to bump up EV to +0.3 or +0.7 to get a better shot when using Enhanced Mode (with no nightmode).
Sarmad's 5.02 driver
based on W810 4.5
- Kriomag's Enhanced Mode and ENM (WB Profiles supported)
- Kriomag's Manual / Super Manual Focus (on macro mode)
- 16x smooth zoom for Video Recording
- including Pilya color correction (when FINE quality is chosen)
- video recording enhancements
- AE Lock from Chengrong
- JPEG compression at 89
- LED white balance set to "02" (flourescent)
Link:
http://www.mediafire.com/?djx1dhtinmm
Also, I know some of you don't like the manual focus and just want the regular 4x zoom back. So, here you are:
Sarmad's 5.02 Lite
based on W810 4.5
- same as 5.02 except there is no manual focus (only autofocus) and original 4x zooming
Link:
http://www.mediafire.com/?exnnuetlnmk
[ This Message was edited by: sarmadgilani on 2007-04-12 06:26 ]
[ This Message was edited by: sarmadgilani on 2007-04-12 06:27 ]
Posted by myavu
On 2007-04-12 07:17:39, sarmadgilani wrote:
ok, I think this is a good driver for W810 users..
I'm getting good colors and sharp pictures, and don't see any greenish/yellowish tint in Enhanced Mode.
Tip: under very low light it helps to bump up EV to +0.3 or +0.7 to get a better shot when using Enhanced Mode (with no nightmode).
Sarmad's 5.02 driver
based on W810 4.5
- Kriomag's Enhanced Mode and ENM (WB Profiles supported)
- Kriomag's Manual / Super Manual Focus (on macro mode)
- 16x smooth zoom for Video Recording
- including Pilya color correction (when FINE quality is chosen)
- video recording enhancements
- AE Lock from Chengrong
- JPEG compression at 89
- LED white balance set to "02" (flourescent)
Link:
http://www.mediafire.com/?djx1dhtinmm
Is this Based on 21.6 or 21.4
Posted by pakraider
The Enhanced mode stuff is based on 21.4 since it gave better sharpness and picture quality.
Posted by pakraider
here's a shot with 5.02 and CC on.. with LED and Macro on, in low light.. looks nice and sharp
hmm thumbnail link isnt working.. here's a link to it:
http://img264.imageshack.us/img264/8545/dsc01685nt6.jpg
[ This Message was edited by: sarmadgilani on 2007-04-12 07:25 ]
[ This Message was edited by: sarmadgilani on 2007-04-12 07:26 ]
Posted by Kriomag
On 2007-04-12 00:00:21, P&A wrote:
Hi! My nick Pilya. At once I apologize for my English as I write by means of the translator
The Driver with color correction it was developed only for K750 with CID49. For other models it{he} is not necessary, or other correction is necessary.
Hi man!
What is your newest driver version? (could you give me the link?) i want to implement your newest CC 'macro' in my driver
thx.
Posted by kukuh
@Kriomag,good work man...chenrong n your code is really ROCK!!,can make awesome camdriver...
can you make your 21.6 like 8.54 feature....i mean Manual focus+zoom.....like this:
first, turn on macro for manual focusing,after the object sharp,turn off macro so we can zooming the object freely
or you can put manual focus on night mode,,so first manual focusing with night mode first,after that turn off night mode then we can zooming the object
i like this function in 8.54,,but it is not present in 21.6.....it just like sport mode(no focusing delay)
it really help if we want to capture many moving object(like racing car that far distance from us)
i hope you can understand what i mean.........
Good luck n good work kriomag....the camdriver will be has PERFECT functions!
Posted by Kriomag
On 2007-04-12 09:30:43, kukuh wrote:
can you make your 21.6 like 8.54 feature....i mean Manual focus+zoom.....
I cant see the point of doing this :/ first of all k750/w800/w810 has only digital zoom so its not really zoom, same effect you can achieve when you zoom picture and save 'crop'
i like this function in 8.54, but it is not present in 21.6.....it just like sport mode(no focusing delay)
it really help if we want to capture many moving object(like racing car that far distance from us)
when you turn macro on (enhanced mode with manual focus) and set (+/-) to 1.1 you have 'sport mode' because focus is set to infinity = no focusing delay.
[ This Message was edited by: Kriomag on 2007-04-12 09:05 ]
Posted by kukuh
so,,we can't zooming when focus is set to infinity?!.thats bad......
maybe chenrong can modify 21.6 for that?
Posted by Kriomag
On 2007-04-12 10:14:10, kukuh wrote:
so,,we can't zooming when focus is set to infinity?!.thats bad......
maybe chenrong can modify 21.6 for that?
really... why you want zoom so badly?
You can do it manually later... take picture without zoom, then go to photo folder, then you zoom in to the picture and save cropped image! quality will be the same if you were taking picture with zoom
Posted by kukuh
On 2007-04-12 10:21:07, Kriomag wrote:
On 2007-04-12 10:14:10, kukuh wrote:
so,,we can't zooming when focus is set to infinity?!.thats bad......
maybe chenrong can modify 21.6 for that?
really... why you want zoom so badly?
You can do it manually later... take picture without zoom, then go to photo folder, then you zoom in to the picture and save cropped image! quality will be the same if you were taking picture with zoom
yes you're right....bcoz it is digital zoom,so will be crap
but i mean zooming for get closer view
object
Posted by pakraider
On 2007-04-12 10:26:14, kukuh wrote:
yes you're right....bcoz it is digital zoom,so will be crap
but i mean zooming for get closer view
object
hmm.. not sure why you would need to, but you could use the Super manual focus feature to do that.. just set to 1.1 (infinity) and then press the shutter half way to get the 16x zoomed view to find something or whatever you want to do before taking the shot.
Posted by Kriomag
21.6 Examples:
[ This Message was edited by: Kriomag on 2007-04-12 10:00 ]
Posted by Kriomag
On 2007-04-12 10:53:26, sarmadgilani wrote:
press the shutter half way to get the 16x zoomed view to find something or whatever you want to do before taking the shot.
i checked it few minutes ago and preview zoom is x4
( i can make it even x16 but x4 is optimal i think... )
Posted by pakraider
On 2007-04-12 11:04:04, Kriomag wrote:
i checked it few minutes ago and preview zoom is x4
( i can make it even x16 but x4 is optimal i think... )
ah, yes youre right.. and 4x is mooore than enough. seriously, with 16x you will see noise and not much else
Posted by wayne_rooney
@ Kriomag
u r driver 21.6 is it for k750 cid36......
u r pics look good..
plz provide me page no.. of u r driver or link ... i m confuse with so many versions plz...
srry....
Posted by Kriomag
On 2007-04-12 11:44:40, wayne_rooney wrote:
@ Kriomag
u r driver 21.6 is it for k750 cid36?
im using cid36 version cause its working good with my phone (with cid49 version quality is the same)
plz provide me page no.
page 100
[ This Message was edited by: Kriomag on 2007-04-12 10:57 ]
Posted by wayne_rooney
thanks man......
u r pics u take... is it with CC or WIthout CC ?
Posted by BOSSHOGG
@Kriomag- If you made your own topic you could list all your drivers in the first post, whch would be handy.
Posted by elevation1
@kopritis what is your last driver? thanks...
Posted by Kriomag
On 2007-04-12 12:00:32, wayne_rooney wrote:
thanks man......
u r pics u take... is it with CC or WIthout CC ?
i dont remember :/ i took yesterday over 60MB of pitures, some with CC and some without CC
hard to tell...
Posted by Kriomag
On 2007-04-12 12:00:00, BOSSHOGG wrote:
@Kriomag- If you made your own topic you could list all your drivers in the first post, whch would be handy.
you think? :/ leave chengrongs topic?
Posted by pakraider
On 2007-04-12 12:37:39, Kriomag wrote:
On 2007-04-12 12:00:00, BOSSHOGG wrote:
@Kriomag- If you made your own topic you could list all your drivers in the first post, whch would be handy.
you think? :/ leave chengrongs topic?
i think we should just stay here.. theres already several camera mod threads, and all of the stuff with the mods here stem from Chengrong's work with enhanced mode.. so.. keeping that in mind and to honor it, we shud stay here
Posted by Kriomag
On 2007-04-12 12:41:03, sarmadgilani wrote:
i think we should just stay here.. theres already several camera mod threads, and all of the stuff with the mods here stem from Chengrong's work with enhanced mode.. so.. keeping that in mind and to honor it, we shud stay here
i agree
[ This Message was edited by: Kriomag on 2007-04-12 11:51 ]
Posted by Booster_eric
Hi. I know it's not the good thread for my question but i see nowhere a thread for w850i so i'm ask here if anyone know if exist an updates cam driver 4 w850i? And if yes, where to download
Posted by tranced
Here's the w850 discussion thread: http://www.esato.com/board/viewtopic.php?topic=122002