Welcome to Esato.com


Pages:
Previous  123 ... 293031 ... 198199200  Next

Super camera driver for k750/w800/w810


Click to view updated thread with images



Posted by Kriomag

On 2007-04-10 14:24:23, sarmadgilani wrote:
Sarmad's 4.9 ..
Kriomag's 21.5 based on 4.5 (W810 stock drivers) with Kopritis color correction
http://www.mediafire.com/?1dxfnqjnggy

hehe, you're fast!
Im glad i dont have to do this my self, thx
Posted by Mr.Kája
Weell Kriomag, It was quite suprise, but finally, v21.5 for CID49 looks like very stable. No problem, which I had before. I tested just a few mins, but great job!;)
Posted by janek
Kriomag!

Both driver 21.4 and 21.5 in Enhanced mode take too bright shot in normal light room ... etc, but in daylight OK.
Like EV too high. Please correct it.
Posted by Kriomag

On 2007-04-10 13:18:57, janek wrote:
Kriomag!
If change this 6 lines:

seq_set_prop_9= $p2 09
$c2 00
06 02 00 01 00 41 #CMD_END
$cl
06 02 00 01 01 41 #CMD_END
$cx;

with this:

seq_set_prop_9= $p2 09
$c2 00
06 02 00 01 02 41 #CMD_END
$cl
06 02 00 01 03 41 #CMD_END
$cx;

then the autofocus will be faster i think.

faster yes but better? :/
Posted by Kriomag

On 2007-04-10 14:32:23, janek wrote:
Kriomag!
Both driver 21.4 and 21.5 in Enhanced mode take too bright shot in normal light room ... etc, but in daylight OK.
Like EV too high. Please correct it.

i dont think its a problem its feature!

Normal Mode:
Image Hosted by ImageShack.us

Enhanced Normal Mode:
Image Hosted by ImageShack.us
Posted by mirage_bgnow
@Sarmad... good work..


Posted by djrudra
@krimoag

wow...enhanced normal mode looks fantastic....

tell me something though..


when i am in autofocus mode...i am able to zoom in to the image and when i click i get the zoomed image..


when i am in manual focus mode....

i zoom in to get a far image and its blurred....then i put macro on and focus...however, when i click, i am back to the non zoomed size and then i have to do the same thing again and still the same thing happens...

i must be doing something wrong, but what??

can't wait to try the 21.5...


cheers

ananda
Posted by pakraider

On 2007-04-10 14:30:19, Kriomag wrote:

On 2007-04-10 14:24:23, sarmadgilani wrote:
Sarmad's 4.9 ..
Kriomag's 21.5 based on 4.5 (W810 stock drivers) with Kopritis color correction
http://www.mediafire.com/?1dxfnqjnggy

hehe, you're fast!
Im glad i dont have to do this my self, thx


hehe, i just got lucky and happened to visit the thread right after you had posted.. keep up the amazing work bro!
Posted by nV
@ Djrudra

Manual focus is activated by turning on Macro.

With the zoom buttons you can focus the image. Since mobile phones have a small display it is hard to focus, so you do this. First you half press the shot button and you get a zoomed pic (8x I think). Now you can easy focus the image. Then you half press the shot button again and your image is zoomed out, but it is focused. And finally you press the shoot button full and image is taken...
I really don't know why so many people have problems with understanding. It's quite simple process...

[ This Message was edited by: nV on 2007-04-10 14:15 ]
Posted by pimp123
enhanced normal mode = just macro on ??
edit
sorry for being lazy, just had a second look at the specs, yes it's just macro on.

[ This Message was edited by: pimp123 on 2007-04-10 14:06 ]
Posted by janek
OK, this is my problem.
Macro on spot off daylight at window.


I think too long shutter.


[ This Message was edited by: janek on 2007-04-10 14:08 ]
Posted by mirage_bgnow
Special greetimgs to Kriomag, Sarmad, Kopritis...for my CID49 R1BC002 perhaps this version (4.9) is the best choice..





may be is stiil greenish, but the panorama outside the windows is speingtime already:)

[ This Message was edited by: mirage_bgnow on 2007-04-10 14:33 ]
Posted by myavu

On 2007-04-10 14:54:00, sarmadgilani wrote:

On 2007-04-10 14:30:19, Kriomag wrote:

On 2007-04-10 14:24:23, sarmadgilani wrote:
Sarmad's 4.9 ..
Kriomag's 21.5 based on 4.5 (W810 stock drivers) with Kopritis color correction
http://www.mediafire.com/?1dxfnqjnggy

hehe, you're fast!
Im glad i dont have to do this my self, thx


hehe, i just got lucky and happened to visit the thread right after you had posted.. keep up the amazing work bro!


Sarmad's 4.9 Kriomag's 21.5 based on 4.5 (W810 stock drivers) with Kopritis color correction is the best yet edited...

It is doing wonders in my W810i with FS R4ED001

Thanks and Best of luck, Sarmad & Kriomag


[ This Message was edited by: myavu on 2007-04-10 14:23 ]
Posted by 679
About 21.5 Kriomag.
As i've tested normal EM has shutter 1s and less. ENM (macro+NM) has shutter 5-10s and less (for EV=-2.0 its 1s). So be aware with moving object and(or) camera shaking.
But when light condition OK, the shutter is 1/30s in normal EM (ISO=100). So its great feature.


[ This Message was edited by: 679 on 2007-04-10 14:47 ]
Posted by guguly

On 2007-04-10 15:00:29, nV wrote:
@ Djrudra

Manual focus is activated by turning on Macro.



if i get it correctly, macro on and at 1.0 zoom, its at autofocus. but what about at 1.1-4? these are already at manual focus, right? is there any difference in focus if i choose macro+1.1 or 3.0 0r 1.9 or 2.2 zooms?
Posted by nV

On 2007-04-10 15:51:17, guguly wrote:

On 2007-04-10 15:00:29, nV wrote:
@ Djrudra

Manual focus is activated by turning on Macro.



if i get it correctly, macro on and at 1.0 zoom, its at autofocus. but what about at 1.1-4? these are already at manual focus, right? is there any difference in focus if i choose macro+1.1 or 3.0 0r 1.9 or 2.2 zooms?


1.0 is auto focus, 1.1 equals focus to infinity and 4.0 is in reality macro (for objects a few cm from camera). From this you can see that the closer the object is to camera, you need higher "zoom level" to get a sharp pic. I usually use manual focus set to infinity for taking pics, because I am always at least a few meters from the object...
Posted by AllanJacques
Actually, I really dont know if CC is worth using. my pics tend to get a little pink or something like that. but then again, without it they tend to green. just dont know what to do.
Posted by mirage_bgnow

On 2007-04-10 16:51:51, AllanJacques wrote:
Actually, I really dont know if CC is worth using. my pics tend to get a little pink or something like that. but then again, without it they tend to green. just dont know what to do.



Same situation...When i'm looking at others phones pics here in this forum, they look good with normal color balance, but in most cases mine's are usually a lot of green or red, depend of mine WB profiles.

[ This Message was edited by: mirage_bgnow on 2007-04-10 16:11 ]

[ This Message was edited by: mirage_bgnow on 2007-04-10 16:25 ]
Posted by djrudra
this pic is the zoomed in one, with auto focus (maco off)



with maco on, focus ~1.6....i had originally zoomed in....put macro on, got a blurry pic, focused to sharpness...then when i clicked, i got this pic...



it automatically zoomed out...

cheers

ananda
Posted by cassanova
@Sarmad n Krio..

You both ROCKS man !! well, i've tested some of your drivers n the latest is awesome!! Sorry i can't visit this site too often but if i do, ill try to upload some of the pictures taken by your 21.5 driver..

Keep up the good works brother!!
Posted by Kriomag

On 2007-04-10 19:08:06, djrudra wrote:
this pic is the zoomed in one, with auto focus (maco off)

[img]...[/img]

with maco on, focus ~1.6....i had originally zoomed in....put macro on, got a blurry pic, focused to sharpness...then when i clicked, i got this pic...

[img]...[/img]

it automatically zoomed out...

cheers

ananda


did you read instructions for super manual focus (when macro is ON) ? i dont think so...

When macro is on, normal zoom is disabled, only zoom is PREVIEW ZOOM for precise focus adjustment , you can ON/OFF zoom preview clicking half-shutter.
+/- is focus adjustment in this mode... if you want pictures with zoom turn macro off...

[ This Message was edited by: Kriomag on 2007-04-10 19:00 ]
Posted by Kriomag

On 2007-04-10 15:06:09, janek wrote:
OK, this is my problem.
Macro on spot off daylight at window.

I think too long shutter.

i think you focused with zoom preview on keyboard and then took picture? am i right? autoexposure was set at dark keyboard and then AE Lock blocked it when you took picture, thats why its too bright (you could click half-shutter for zoom preview OFF and when exposure is good hit shutter and take picture...) :/

PS. wymiekam przy tym angielskim... brakuje mi slow i nie pamietam jak co sie odmienia sorka...
Posted by Kriomag
enhanced mode is so cool

Normal:
Image Hosted by ImageShack.us

Enhanced:
Image Hosted by ImageShack.us


PS. I think i have too many MSPD lol
Image Hosted by ImageShack.us

[ This Message was edited by: Kriomag on 2007-04-10 19:49 ]
Posted by AllanJacques
ocasional reboots hapening... more often than ocasionally...
why me? why me, oh God!!!!

ps: greatest quality though!!!

[ This Message was edited by: AllanJacques on 2007-04-10 20:18 ]
Posted by MiHaU

On 2007-04-10 21:10:59, AllanJacques wrote:
ocasional reboots hapening... more often than ocasionally...
why me? why me, oh God!!!!


Same here.. With sarmadgilani mod.

Photos are great.

Link.
Posted by AllanJacques
Yeah... same mod, same problems... could you test if it is happening when you use night mode?
really great pics! why in the name of God, why when finally i find a great driver it has to be bugged? I mean "Come on"!!!!

@Kriomag
What is the diferences between 21.4 and 21.5?
thanks!

[ This Message was edited by: AllanJacques on 2007-04-10 20:41 ]

Posted by wendy04

On 2007-04-10 02:47:23, sarmadgilani wrote:


I don't have a K750, but I think my mods should work fine on a CID49 k750.

again credit goes to Kriomag; he does the best mods.. I just take them and base them on 4.5 so they work better for the W810


thanks

[ This Message was edited by: wendy04 on 2007-04-10 20:50 ]
Posted by nV

On 2007-04-10 20:12:04, Kriomag wrote:

PS. I think i have too many MSPD lol
Image Hosted by ImageShack.us

[ This Message was edited by: Kriomag on 2007-04-10 19:49 ]


Wow, 10 GB of flash memory
Some people still don't have hard drives that big...
Posted by wendy04

On 2007-04-10 08:54:05, myavu wrote:

On 2007-04-10 02:47:23, sarmadgilani wrote:

On 2007-04-09 23:34:07, wendy04 wrote:

On 2007-04-09 14:15:52, sarmadgilani wrote:
Sarmad's 4.8 driver


are these mods working for the k750 cid49 kriomag driver?


I don't have a K750, but I think my mods should work fine on a CID49 k750.

again credit goes to Kriomag; he does the best mods.. I just take them and base them on 4.5 so they work better for the W810


Hi... Please tell me what all Features are there in Sarmad's 4.8 driver in compare to Kriomag's v21.4...


I might have misread the situation I was referring to :

= "with the latest Kopritis color correction. and guguly, burst mode works now"

maybe that was just referring to the previous driver and not kriomags 2.4 ??

sorry if i misread.
Posted by MiHaU

On 2007-04-10 21:37:21, AllanJacques wrote:
could you test if it is happening when you use night mode?


I've got ENm turned on all the time. If I finally turn camera on I'll try to check it without night mode. I think I'll try the latest Kriomag's mod.
Posted by Mr.Kája
Kopritis, nice driver now and I would have one question. Would be able to just add (without changing your mods and their quality) manual focus with zoom like in Kriomags drivers (choose focus, press shutter and see how is it sharp)? You know, Kriomags one is perfect, but a little less sharp in EN mode and noisy without it for portrait at my phone. And your seems to be sharp in this situation. But zoom doesn't work on my cid49 phone with your camcoder, so you could add cid49support even so.
Anyway, great work Kopritis and Kriomag
Posted by AllanJacques

On 2007-04-10 22:04:38, MiHaU wrote:

On 2007-04-10 21:37:21, AllanJacques wrote:
could you test if it is happening when you use night mode?


I've got ENm turned on all the time. If I finally turn camera on I'll try to check it without night mode. I think I'll try the latest Kriomag's mod.

hey, i noticed one thing: when my phone stucks in this kind of situation, i close the lid and turn it on again, see, must be something with light sensor and stuff...
obs: my w810 has k750 back part.
Posted by MiHaU
I just installed Kriomag's mod 21.5, and so far it works properly. I couldn't turn my camera on with Sarmad's 4.8 driver anyway.. ;/



[ This Message was edited by: MiHaU on 2007-04-10 21:24 ]
Posted by salambaba
can any1 help me in this topic :

How to programming Camdriver0 ?
http://www.esato.com/board/viewtopic.php?topic=145234


Posted by kopritis

On 2007-04-10 22:07:21, Mr.Kája wrote:
Kopritis, nice driver now and I would have one question. Would be able to just add (without changing your mods and their quality) manual focus with zoom like in Kriomags drivers (choose focus, press shutter and see how is it sharp)? You know, Kriomags one is perfect, but a little less sharp in EN mode and noisy without it for portrait at my phone. And your seems to be sharp in this situation. But zoom doesn't work on my cid49 phone with your camcoder, so you could add cid49support even so.
Anyway, great work Kopritis and Kriomag



ok... i will try to put on my mod, Kriomag's manual focus with zoom...

[ This Message was edited by: kopritis on 2007-04-10 21:58 ]
Posted by Chopz
Here's some pics I took today and yesterday in normal mode with my W810i. Which one do you guys prefer. I'm going to try Kriomag v21.5 & Sarmad 4.9 next. There is a huge difference in both pics when it comes to colour saturation.

Kriomag v21.4


Sarmad 4.8





[ This Message was edited by: Chopz on 2007-04-10 22:10 ]
Posted by AllanJacques
This diference, my friend, is called Color Correction... in my opinion, when there is CC, pictures tend to get a little pink, dont you think?
but tell me one thing: what picture is closer to real collors?
thanks and test the new drivers.

[ This Message was edited by: AllanJacques on 2007-04-10 22:18 ]
Posted by Chopz
Kriomag's v21.4 is more "real" to the true colours and also less noisy when I look at the pics in full resolution. Tomorrow I'll try his v21.5 and see if anything has changed.

I thought for sure Sarmad's was going to be the winner because it's based on the original 4.5 driver but I guess I was wrong.

[ This Message was edited by: Chopz on 2007-04-10 22:20 ]
Posted by richyoliva
Hello everybody... Could someone please explain me how to install a certain device? I would like to know how can i install the Super Camera Driver on my W810I.
Posted by AllanJacques

On 2007-04-10 23:19:23, Chopz wrote:
Kriomag's v21.4 is more "real" to the true colours and also less noisy when I look at the pics in full resolution. Tomorrow I'll try his v21.5 and see if anything has changed.

I thought for sure Sarmad's was going to be the winner because it's based on the original 4.5 driver but I guess I was wrong.

[ This Message was edited by: Chopz on 2007-04-10 22:20 ]


Hold on mate! The main diference qhen these two are involved is the CC, so if you want to be absolutely sure, test Sarmad's without CC.

Posted by Chopz

On 2007-04-10 23:25:30, AllanJacques wrote:

On 2007-04-10 23:19:23, Chopz wrote:
Kriomag's v21.4 is more "real" to the true colours and also less noisy when I look at the pics in full resolution. Tomorrow I'll try his v21.5 and see if anything has changed.

I thought for sure Sarmad's was going to be the winner because it's based on the original 4.5 driver but I guess I was wrong.


Hold on mate! The main diference qhen these two are involved is the CC, so if you want to be absolutely sure, test Sarmad's without CC.


I can't seem to find Sarmad's 4.8 without colour correction anywhere. I went back to page 89-90 and it just has one version

[ This Message was edited by: Chopz on 2007-04-10 22:35 ]
Posted by pakraider
I agree with the pictures here and the ones I've tested that overall, the CC gives pinkish/reddish pictures.. but without it, you get yellowish pictures...

to me its a tough tradeoff, but I think I'm now going to leave it out until it can be tweaked more.. Kopritis, please keep tweaking it I'll try to play with it as well, or perhaps go back to Pilya, we'll see..

Sarmad's 4.9 with NO CC... = Kriomag's 21.5 based on 4.5

Link:

http://www.mediafire.com/?7yjy2mngmnu

[ This Message was edited by: sarmadgilani on 2007-04-10 22:48 ]
Posted by Chopz

On 2007-04-10 23:47:33, sarmadgilani wrote:
I agree with the pictures here and the ones I've tested that overall, the CC gives pinkish/reddish pictures.. but without it, you get yellowish pictures...

to me its a tough tradeoff, but I think I'm now going to leave it out until it can be tweaked more.. Kopritis, please keep tweaking it I'll try to play with it as well, or perhaps go back to Pilya, we'll see..

Sarmad's 4.9 with NO CC... = Kriomag's 21.5 based on 4.5

Link:

http://www.mediafire.com/?7yjy2mngmnu

[ This Message was edited by: sarmadgilani on 2007-04-10 22:48 ]

Thanks Sarmad. I'll give it a try tomorrow. Is there a reason why you guys didn't change the value here to "02" from "05"

LED_WB_SET= 06 02 00 01 05 11 #CMD_END
Posted by Kriomag
A lot of people have this dilemma: to CC or not to CC?
Now i give you the choice:

Kriomag v21.6 (donors: 7.7 Final, 8.53, 8.54, 11.1)

- Base driver: 7.7 Final
- Enhanced Mode (Macro ON: Normal/Night + LED Support)
- 3 VR Modes (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viewfinder
- AE Lock
- CC Support (Picture Quality: Normal = Default Colors, FINE = Color Correction)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4: for Photos & Night/EnhancedNight Mode VR, x16: Smooth Linear for Normal/Enhanced Mode VR)
- Super Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
- Now EM Supports WB Profiles (also with LED)


http://www.rogepost.com/n/3932518121 - fixed! <-- All CID Versions


Instructions for Super Manual Focus:
When in range 1.1-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview clicking half-shutter) - now (when zoom is on) you can adjust focus very precisely (+/-), when picture is most sharp half press (and hold) shutter (the zoom will go off) and when you are ready press shutter to take picture (perfect shot guaranteed ). enjoy!


Picture Quality NORMAL:
Image Hosted by ImageShack.us

Picture Quality FINE:
Image Hosted by ImageShack.us

Picture Quality NORMAL (with LED):
Image Hosted by ImageShack.us

Picture Quality FINE (with LED):
Image Hosted by ImageShack.us

I suggest to restart the phone after installing new driver (just in case )

PS. Its second driver this day... im crazy lol

[ This Message was edited by: Kriomag on 2007-04-11 08:57 ]
Posted by pakraider
Cool! ... but what triggers turning it on and off? looks like its the quality mode, awesome

[ This Message was edited by: sarmadgilani on 2007-04-10 23:11 ]
Posted by Chopz

On 2007-04-10 23:55:31, Kriomag wrote:
a lot of people have this dilemma: to CC or not to CC? lol

now i give you the choice:

http://www.rogepost.com/n/1295934860 <--- Kriomag v21.6

This one is for CID 36.....do you have it for CID 49?

// Kriomag v21.5 (donors: 7.7 Final, 8.53, 8.54)
//
//- CID36 version
//- Base driver: 7.7 Final
//- Enhanced Mode - Macro ON (Normal/Night + LED Support)
//- 3 VR Modes (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
//- Smooth preview on Viewfinder
//- AE Lock
//- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
//- JPEG 89% (for Normal & Fine Picture Quality)
//- Advanced Zoom (x4: for Photos & Night/EnhancedNight Mode VR, x16: Smooth Linear for Normal/Enhanced Mode VR)
//- Super Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
//- Now EM Supports WB Profiles (also with LED)
//
//Instructions for Super Manual Focus
// Enter Enhanced Mode (Macro ON).
// When in range 1.1-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview by clicking half-shutter)
// now (when zoom is on) you can adjust focus very precisely (+/-)
// when picture is most sharp half press (and hold) shutter (the zoom will go off)
// and when you are ready press shutter to take picture (perfect shot guaranteed ). enjoy!
Posted by kopritis
@sarmadgilani

I can make a better CC mod but right now i don't have a free time!
Posted by pakraider
Sarmad's 4.91 .. = Kriomag's 21.6 bsaed on 4.5 (for W810 users)
this one has the color correction option as added by Kriomag..

link:

http://www.mediafire.com/?bednlznzhmy

[ This Message was edited by: sarmadgilani on 2007-04-10 23:18 ]
Posted by AllanJacques
@sarmadgilani

man, it is just about time to solve all our problems! Kriomag 21.6 CC optional! please, base it in w810 stock driver and we will be forever happy!
Posted by BOSSHOGG
Quote:

On 2007-04-10 23:55:31, Kriomag wrote:
a lot of people have this dilemma: to CC or not to CC? lol

now i give you the choice:

Kriomag v21.6 (donors: 7.7 Final, 8.53, 8.54, 11.1)

- Base driver: 7.7 Final
- Enhanced Mode (Macro ON: Normal/Night + LED Support)
- 3 VR Modes (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viewfinder
- AE Lock
- CC Support (Picture Quality: Normal = Default Colors, FINE = Color Correction)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4: for Photos & Night/EnhancedNight Mode VR, x16: Smooth Linear for Normal/Enhanced Mode VR)
- Super Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
- Now EM Supports WB Profiles (also with LED)


http://s16.quicksharing.com/v/4226908/Kriomag_v21.6_CID36.zip.html <-- CID36

http://s16.quicksharing.com/v/9989990/Kriomag_v21.6_CID49.zip.html <-- CID49


Instructions for Super Manual Focus:
When in range 1.1-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview clicking half-shutter) - now (when zoom is on) you can adjust focus very precisely (+/-), when picture is most sharp half press (and hold) shutter (the zoom will go off) and when you are ready press shutter to take picture (perfect shot guaranteed ). enjoy!


PS. I suggest to restart the phone after installing new driver (just in case )

[ This Message was edited by: Kriomag on 2007-04-10 23:08 ]


Don't know what you've done? But this now works on my phone fine! I now have manual focus, Thanks

Links updated

[ This Message was edited by: bosshogg on 2007-04-10 23:28 ]

[ This Message was edited by: bosshogg on 2007-04-10 23:31 ]

Pages:
Previous  123 ... 293031 ... 198199200  Next
Click to view updated thread with images


© Esato.com - From the Esato mobile phone discussion forum