Super camera driver for k750/w800/w810

Posted by lord_kin0
i've tested it. it's ok, except the fact that i get very dark pictures with enhace mode. I have w810i. maybe you didn't uploaded the driver properly. try again, it will surely work.

Posted by Takichi
camera starts now..but i can make only one pic..then the camera doesn't start..what's the problem??

[ This Message was edited by: Takichi on 2007-04-09 14:54 ]

Posted by lord_kin0
i've noticed that V21.2 is better for my w810i, though it is a little dark within ENM, but not as much as with v21.4.

I i've got some really nice pictures using the infinity focus mode. Observe that they have no blur considering that those birds were moving.

Posted by Kriomag

On 2007-04-09 14:15:52, sarmadgilani wrote:
Sarmad's 4.8 driver
as always, based on the W810 stock 4.5

This is essentially Kriomag's 21.4 based on 4.5, and with the latest Kopritis color correction.

and guguly, burst mode works now

Link:
http://www.mediafire.com/?4zawnjnngda

[ This Message was edited by: sarmadgilani on 2007-04-09 13:25 ]

thx man

you saved my time

PS. you forgot one thing

spot...

Posted by pakraider
ah, good catch Kriomag

i did indeed forget spot.

no problem, its in there now. link updated:

Sarmad's 4.8 driver (Kriomag 21.4 based on W810's stock 4.5, SPOT included
http://www.mediafire.com/?3uyqt22yemy

[ This Message was edited by: sarmadgilani on 2007-04-09 16:09 ]

Posted by pakraider
Kriomag, just had a thought... is there a way of triggering the color correction routine based on Quality mode? so for instance, having the quality set to Normal could turn on the color correction.. but i think just putting #COLOR_COR in the seq_set_prop_5_0 wouldn't work, would it?

Posted by Kriomag

On 2007-04-09 17:12:55, sarmadgilani wrote:
Kriomag, just had a thought... is there a way of triggering the color correction routine based on Quality mode? so for instance, having the quality set to Normal could turn on the color correction.. but i think just putting #COLOR_COR in the seq_set_prop_5_0 wouldn't work, would it?

i think it wouldnt work :/ but what is stopping you for trying it

Posted by milandj
@ Takichi

I had the same problem on my k750i cid49 r1ca021. Put the bold line in camdriver and it will work.

seq_get_prop_17= 05 01 00 2E 01 $f $r2 0 0;
seq_set_prop_18=;
seq_get_prop_19= $cf 01 $s0 00 $cl $s0 00 $cx;

aeolus147 wrote that on page 39.

P.S. Great work Kriomag.

Posted by pakraider

On 2007-04-09 18:08:19, Kriomag wrote:

i think it wouldnt work :/ but what is stopping you for trying it

of course, no harm in trying! and i tried... and couldnt get it to work

but i think this CC is pretty good to just have it hardcoded in...

Posted by nV
Is there any possibility to take pics in full resolution in burst mode?
That would be very useful...

Posted by tranced

On 2007-04-09 21:19:57, nV wrote:
Is there any possibility to take pics in full resolution in burst mode?
That would be very useful...

AFAIK, no. this is encoded in the OS. This query you made looks similar to one i made in the Hybrid Camera Driver for W800i/K750

Posted by nV

On 2007-04-09 21:33:45, tranced wrote:

On 2007-04-09 21:19:57, nV wrote:
Is there any possibility to take pics in full resolution in burst mode?
That would be very useful...

AFAIK, no. this is encoded in the OS. This query you made looks similar to one i made in the Hybrid Camera Driver for W800i/K750

Ah, bummer

Posted by yellky
Kriomag's v21.4 :: outdoors, auto WB, macro on, spot off:

Posted by wendy04

On 2007-04-05 23:49:18, kopritis wrote:

On 2007-04-05 23:11:11, wendy04 wrote:

btw does anyone have the default 5.3 se camdriver for 750i r1co?

There you go, the original R1CA021 5.3 driver from Sony:
http://www.rogepost.com/n/4497690594

[ This Message was edited by: kopritis on 2007-04-05 22:50 ]

Thnx guys, Greatly appreciated!

btw great work on the new drivers.

Posted by Kriomag

On 2007-04-09 00:04:41, norbi_nw wrote:
what's the use of the super manual focus when shutter is half pressed down (zooms to 8-10x).

i thought i explained it in manual

half press shutter once! and let go (you can ON/OFF this zoom by clicking half-shutter), now when zoom is on you can adjust focus very precisely

when picture is most sharp half press shutter (the zoom will go off) and when you are ready press shutter to take picture

[ This Message was edited by: Kriomag on 2007-04-09 22:56 ]

Posted by Kriomag

On 2007-04-09 03:00:45, mladen750i wrote:
soooo many errors...

if you are talking about my driver plz tell me more, what errors? i need detailed info if you want me to improve this driver

for now i've managed to fix some errors and tomorrow i will introduce my newest version (21.5)
- Enhanced Mode VR fixed (focus is working properly) and all VR modes has zoom now

- Now Enhanced mode supports WB Profiles
- Now EM + LED Supports WB Profiles

im still working on 'dark pictures with EM' issue...

Posted by wendy04

On 2007-04-09 14:15:52, sarmadgilani wrote:
Sarmad's 4.8 driver

are these mods working for the k750 cid49 kriomag driver?

Posted by Takichi
@milandj
thanks..i will test it now..

Posted by kopritis

On 2007-04-09 23:25:10, Kriomag wrote:

PS. i dont know why so many people have problem understanding this very useful feature :/

Because most users in here "i think" it's simple users of camera...
So, they want some time to understand some effects...

Posted by Kriomag

On 2007-04-09 23:41:09, kopritis wrote:

On 2007-04-09 23:25:10, Kriomag wrote:

PS. i dont know why so many people have problem understanding this very useful feature :/

Because most users in here "i think" it's simple users of camera...
So, they want some time to understand some effects...

or... better instructions

hehe
i guess i need some english lessons

Posted by kopritis

On 2007-04-09 23:49:42, Kriomag wrote:

or... better instructions

hehe
i guess i need some english lessons

your english is good.... maybe better instructions!!

[ This Message was edited by: kopritis on 2007-04-09 22:52 ]

Posted by kopritis
@Kriomag

Can i ask you something? Did you try to put ENHANCE SHUTTER in your driver? I think is good for some strange conditions....

[ This Message was edited by: kopritis on 2007-04-09 23:01 ]

Posted by EduX

On 2007-04-09 23:51:37, kopritis wrote:

On 2007-04-09 23:49:42, Kriomag wrote:

or... better instructions

hehe
i guess i need some english lessons

your english is good.... maybe better instructions!!

[ This Message was edited by: kopritis on 2007-04-09 22:52 ]

I think, for common user it is just right

Posted by AllanJacques
@Kriomag check your in-box again please...

errr... how often do you check your inbox?

[ This Message was edited by: AllanJacques on 2007-04-09 23:45 ]

Posted by navy614
when i took a pic in night modal,it took nearly 20 sec to save it.
Is it normal?

Posted by pikszel
@yellky

Do you have an older K750(camera hardvare) or use any "noise killer" ? Your pictures is totally noise free.

_________________
"Az egyed�li l�tezô dolgok az atomok �s az �res t�r; minden egy�b puszta k�pzelet"

[ This Message was edited by: pikszel on 2007-04-10 01:43 ]

Posted by pakraider

On 2007-04-09 23:34:07, wendy04 wrote:

On 2007-04-09 14:15:52, sarmadgilani wrote:
Sarmad's 4.8 driver

are these mods working for the k750 cid49 kriomag driver?

I don't have a K750, but I think my mods should work fine on a CID49 k750.

again credit goes to Kriomag; he does the best mods.. I just take them and base them on 4.5 so they work better for the W810

Posted by jonaugust_69
For problem blue pics in LED

The problem is corrected if we select fluorescent in the White balance

i hav a k750i phone cid49 red
Firmwares:W800_R1BC002

Photo Samples:
driver: enm-cc-kopritis-sharpeness 5.3

White balance: auto
Normal Mode + LED

White balance: fluorescent
Normal Mode + LED

thanks
lKriomag and Kopritis
Latest driver they are very good, it becomes more contrast?

I changed my zoom in driver kopritis with zoom from lKriomag
In phone it functions good.

download file
http://rapidshare.com/files/2[....]is-sharpeness-Zoom_Kriomag.zip

Posted by mladen750i

On 2007-04-09 23:30:33, Kriomag wrote:
if you are talking about my driver plz tell me more, what errors? i need detailed info if you want me to improve this driver

No, precisely error, i mean wrong conclusion about: First, GET_SENSOR_VERSION...
This command not in relation with cid49 firmware, but YES in relation with cid49 CMOS sensor... This in case for those who have cid49 k750`s with w800i firmware, mean that better result is to have mentioned command in driver... I`m pretty much sure that GET_SENSOR_VERSION doesn`t affect ENM...
Second is about Color corection... Command READ_REG=05 01 00 !0 01 $f !1;doesn`t have functionality in driver...
Third, CC makes driver unstable because is implemented in seq_ss_start command...
After all, yours and other members work is good and with good ideas!
P.S:But, try to decrease the link numbers with versions and take more time to test drivers, and confusion will gone!

Regards from me!

Posted by djrudra
cant wait for krio's 21.5....

just a quickie tho...how do i manipulate spot...as in how do i put it on/off and then finger it.??

cheers

ananda

Posted by navy614
in nigtmod the v21.4 is slower than v8.53,can anybody solve it?

Posted by GsS 7tr
What driver it's best for a W810i? The one based on 7.7F or 4.5?

Posted by stingjoel

On 2007-04-10 05:41:35, GsS 7tr wrote:
What driver it's best for a W810i? The one based on 7.7F or 4.5?

@GsS 7tr;

Use this: Sarmad's 4.8 driver
Please...take a look at previous pages before ask...

Posted by mirage_bgnow
@Kriomag, what is your firm on phone? Should I replace my R1BC002 with R1CA021 or R1DB001 to get better pics or it's doesn't matter what kind of firm is it? Please tell your opinion...(sorry for my english btw)

The others - pls tell your opinions too, what is the best firm for camdrivers in yours CID49 phones..?

[ This Message was edited by: mirage_bgnow on 2007-04-10 06:17 ]

[ This Message was edited by: mirage_bgnow on 2007-04-10 10:26 ]

Posted by yellky

On 2007-04-10 02:38:39, pikszel wrote:
Do you have an older K750(camera hardvare) or use any "noise killer" ? Your pictures is totally noise free.

bought my K750i last year and was lucky enuff to get the CID36

no idea if it's older or newer camera hardware - oh btw, i can zoom in max. resolution so i guess it's the older one..

and the pictures attached are straight from camera - no editing at all.

best regards,
gl

Posted by myavu
Friends... now lot of Super Camera Drivers here... Thanks and Best of Luck for all who are working behind this... Can somebody post a complete help for a Camera drive... i.e. List all features and how to operate it. I am new into this area. Millions of thanks in advance...

Using W810i, 2 months old, FS R4ED001

Posted by Kriomag

On 2007-04-10 04:52:55, mladen750i wrote:
Second is about Color corection... Command READ_REG=05 01 00 !0 01 $f !1;doesn`t have functionality in driver...

i know but i want to rewrite entire driver for more clarity (like in K800 driver

)

try to decrease the link numbers with versions and take more time to test drivers, and confusion will gone!

Regards from me!

i think much faster all bugs will be found if many people will test the driver

thats why i link so often

peace!

Posted by Kriomag

On 2007-04-10 06:50:48, mirage_bgnow wrote:
@Kriomag, what is your firm on phone?

I have K750i CID49 (can zoom at max res.) with W800i firmware (R1BC002, FS + MAIN + 27 patches

lol).
Firmware doesnt affect picture quality, only driver and sensor version...

[ This Message was edited by: Kriomag on 2007-04-10 07:46 ]

Posted by myavu

On 2007-04-10 08:40:52, Kriomag wrote:

On 2007-04-10 04:52:55, mladen750i wrote:
Second is about Color corection... Command READ_REG=05 01 00 !0 01 $f !1;doesn`t have functionality in driver...

i know but i want to rewrite entire driver for more clarity (like in K800 driver

)

try to decrease the link numbers with versions and take more time to test drivers, and confusion will gone!

Regards from me!

i think much faster all bugs will be found if many people will test the driver

thats why i link so often

peace!

Do Sarmad's 4.8 driver has all v21.4's features

Posted by myavu

On 2007-04-10 02:47:23, sarmadgilani wrote:

On 2007-04-09 23:34:07, wendy04 wrote:

On 2007-04-09 14:15:52, sarmadgilani wrote:
Sarmad's 4.8 driver

are these mods working for the k750 cid49 kriomag driver?

Hi... Please tell me what all Features are there in Sarmad's 4.8 driver in compare to Kriomag's v21.4...

Posted by kopritis

On 2007-04-10 03:29:10, jonaugust_69 wrote:

I changed my zoom in driver kopritis with zoom from lKriomag
In phone it functions good.

Thanks for the Zoom!!!!

Posted by pakraider

On 2007-04-10 08:54:05, myavu wrote:
Hi... Please tell me what all Features are there in Sarmad's 4.8 driver in compare to Kriomag's v21.4...

It has all of them, every feature, and works exactly the same way. The only difference is that it is based on the W810's stock 4.5 driver, which gives better results for W810 phones.

In addition to all of the 21.4 features, the 4.8 driver has color correction from Kopritis to give more true to life colors.

[ This Message was edited by: sarmadgilani on 2007-04-10 09:39 ]

[ This Message was edited by: sarmadgilani on 2007-04-10 09:40 ]

Posted by myavu

Thank you very much... Ok how do we get 16x zoom... It's showing 4x only...

which is the best settings for out door /in door?

Posted by WyprasujMnie
Hello...

I'm looking for camdrv, which will be ultrafast, I mean fast focus and making photo. Which one's the fastest?

Greetz

Posted by kopritis

On 2007-04-10 12:09:52, WyprasujMnie wrote:
Hello...

I'm looking for camdrv, which will be ultrafast, I mean fast focus and making photo. Which one's the fastest?

Greetz

try this: http://www.rogepost.com/n/4795367841
is the original 5.3 driver modded from me with the file of zuza and fast focus...
i think it's fast...

[ This Message was edited by: kopritis on 2007-04-10 11:25 ]

Posted by nV

On 2007-04-10 12:09:52, WyprasujMnie wrote:
Hello...

I'm looking for camdrv, which will be ultrafast, I mean fast focus and making photo. Which one's the fastest?

Greetz

You should be looking at camera drivers with manual focus. Just set the focus to infinity (if the object is distanced 2 meters or more from the camera) and you should be happy...

Posted by janek
Kriomag!
If change this 6 lines:

seq_set_prop_9= $p2 09
$c2 00
06 02 00 01 00 41 #CMD_END
$cl
06 02 00 01 01 41 #CMD_END
$cx;

with this:

seq_set_prop_9= $p2 09
$c2 00
06 02 00 01 02 41 #CMD_END
$cl
06 02 00 01 03 41 #CMD_END
$cx;

then the autofocus will be faster i think.

[ This Message was edited by: janek on 2007-04-10 12:23 ]

Posted by dennis.l

On 2007-04-09 14:46:22, Kriomag wrote:

On 2007-04-09 13:42:49, dennis.l wrote:
@kriomag

Hi, Is it possible to have no zoom? I am using your latest driver. everything is great except the zoom keeps comming on when I use macro and sometimes when I only have night mode on too. I don't find digital zoom to be usefull anyway..

its Super Manual Focus and it was designed to be very helpful when manual focusing

(read instructions...)

is it possible to have 1.0 as autofocus, 1.1 as the infinity focus and 1.2 -> 4.0 as the zoom. Manual focus is good but I think it is really hard to tell if you focused properly anyway on the small phone screen

... rotfl

, thats super manual focus is for! (when you once hit half-shutter zoom comes on and you can see if picure is sharp, if not just adjust it +/- and press half-shutter for picture preview and now you press shutter fully for shot

(sorry for my english...)

[ This Message was edited by: Kriomag on 2007-04-09 13:51 ]

Thanks for answering, now I know why is it zooming in.. I think there is a bit of miss-understanding on manual focus. there was instructions with the original post but it is a bit hard to understand.

There is a lot of n00bs out there (myself included.) I just went back to page 90 and re-read the original post (twice) now I understand how it works and how plainly obvious it was.

Thanks for the great driver. waiting for 21.5 now

Posted by Kriomag
Beta testers get ready!

If you encounter any problems plz let me know (with detailed info).

Kriomag v21.5 (donors: 7.7 Final, 8.53, 8.54)

- Base driver: 7.7 Final
- Enhanced Mode (Macro ON: Normal/Night + LED Support)
- 3 VR Modes (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viewfinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4: for Photos & Night/EnhancedNight Mode VR, x16: Smooth Linear for Normal/Enhanced Mode VR)
- Super Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
- Now EM Supports WB Profiles (also with LED)

http://www.rogepost.com/n/2276141770 - fixed! <-- CID36

http://www.rogepost.com/n/5865135573 - fixed! <-- CID49

Instructions for Super Manual Focus:
When in range 1.1-4.0 (+/-) click half-shutter for preview with zoom (you can ON/OFF zoom preview clicking half-shutter) - now (when zoom is on) you can adjust focus very precisely (+/-), when picture is most sharp half press (and hold) shutter (the zoom will go off) and when you are ready press shutter to take picture (perfect shot guaranteed ). enjoy!

[ This Message was edited by: Kriomag on 2007-04-11 09:22 ]

Posted by pakraider
Sarmad's 4.9 ..
Kriomag's 21.5 based on 4.5 (W810 stock drivers) with Kopritis color correction

Link:

http://www.mediafire.com/?1dxfnqjnggy