Welcome to Esato.com


Pages:
Previous  123 4 ... 198199200  Next


Super camera driver for k750/w800/w810


Click to view updated thread with images




Posted by Duran
Quote:

On 2006-11-25 03:13:33, chengrong wrote:
Quote:

On 2006-11-22 15:40:40, Duran wrote:
Ok i got it working.. but the nightmode thing doesnt work for me.
If i set it to nightmode and then the shutterspeed to max it wont focus.. and i cant make any pictures:S.. it takes so long the focussquare thing dissappears



Because of the limitations of the camera, The shutter speed's min value is 1/4s. But the VR can work no limited.


So basicly the night side is just to view in the dark ?
You can use the flash for that :/


Posted by Cold Fusion
[quote]
You need to hold the C-button on your phone when you connect your phone with the pc...

_________________

Hey after holding the "c" on my phone,my pc says "USB flash drive found but the far manager does not find it. It keeps showing connect cable holding "c". please someone tell me what i must do ???

Thanx in advance


Posted by ErnestoD
After installing the new software, what must I do with what code

Posted by tranced
>*<<*< this means right, led, left, left, led, left in horizontal mode. then you go back to EV +0.0

Posted by ErnestoD
Me again for the same reason. I did it 100 times and noting. Change the driver and tipe the code is enough or there is something more. This is frustrating
Thanks

Posted by tranced
you will see the difference im picture quality.

Posted by vinylis
Hi eveyone.

I saw that the "hybrid camera driver for k750/w800" topic went out because of some silly arguments and i cant see many people from there.
where are they? where is jilly?

i am using zuza driver and dont have any opininion about whether i should upgrade to this driver.I read all the pages and couldnt find a comparison with the other modded drivers. especially with zuza driver.

does someone hane any opinion about this?


Posted by smuko
The other topic did its job and it was high time that it was closed. When the topic was started, people were discovering how to mod camera drivers, which values to change and how it affected the picture. They learned most of it and then the topic turned into a rat race. They began arguing which driver was "best" and "ultimate", and they used to get personally offended when s.o. didn't like it. In my opinion, there wasn't much improvement over 5.6c and 2.441, just endless arguments and countless driver versions with minor changes.
Now this driver is totally different. You don't need any comparison pictures and there couldn't possibly be any. Because with SuperMode, you can change virtually any setting on your camera you'll ever need - sharpness, contrast, brightness, exposure, speed, ISO - to name just a few. So it all depends on you and which settings would you choose to make a picture. Now it's up to you to take a perfect shot.

Posted by Cold Fusion
Hey guys I have a W800i which i can't connect my phone with my pc.This is what i do on my pc:
1.Open far manager
2.ALT+F1 then open SEFP
3.Device:DCU-60
Speed: 57600
Phone:K750/w800
4.Enter the matrix
5. Turn my phone off,hold "C" on my phone then connect the cable

But he does not respond he keeps on saying "waiting answer from phone.
Can someone pleas tell me what do ????
Please please

Posted by flintolino
Sorry ... but this is not the best driver for my w800... cuz I ain't got a w800 anymore after this driver... Im holding a fking 2mp Nikkon with so many features I'll problably take a month to learn... but after that Im pretty sure wont buy another phone, at least untill I get money for a 5mp one.

Very very nice job dude... this is a whole new concept.
You should get paid for that.

S U P E R B!



[ This Message was edited by: flintolino on 2006-11-28 03:56 ]

Posted by chengrong
Quote:

On 2006-11-25 11:46:34, max_wedge wrote:
Chenrong, this is a fabulous effort. It's a really service you provide to share this info with us all. Thanks heaps.

It's a shame about the limit of 1/4s shutter speed, a BULB setting would be good.

But it's great to have this level of control over the settings. Can you tell me is this driver in normal mode a 5.3 SE driver?




In normal mode some parameters was changed. Version 8.51 is base on 5.3 SE drriver. This isn't.


Posted by Duran
Quote:

On 2006-11-28 15:00:42, chengrong wrote:
Quote:

On 2006-11-25 11:46:34, max_wedge wrote:
Chenrong, this is a fabulous effort. It's a really service you provide to share this info with us all. Thanks heaps.

It's a shame about the limit of 1/4s shutter speed, a BULB setting would be good.

But it's great to have this level of control over the settings. Can you tell me is this driver in normal mode a 5.3 SE driver?




In normal mode some parameters was changed. Version 8.51 is base on 5.3 SE drriver. This isn't.



What do I need to change to get the VR's Bitrate back to normal again? My videos look like crap again just like with the early firmware
ty

Posted by ErnestoD
Can anybody put a step by step procedure to put this driver, instal it and make it work on the phone

Posted by Duran
Quote:

On 2006-11-28 17:33:56, ErnestoD wrote:
Can anybody put a step by step procedure to put this driver, instal it and make it work on the phone


-download the file
-download far manager: http://farmanager.com/files/FarManager170.exe
-download the SEPF plugin: http://sephone.nm.ru/tools/SEFP010044.zip (put it in the far managerplugin folder
-make sure you have k750's flash driver installed
-turn off your phone
-open far manager
-press f11 and choose SEPF plugin
-Choose: DCU-60, 921600, k750_w800_Cid36
-press enter the matrix
-Hold C on the phone, and connect the cable to the phone
-Choose FS
-go to ifs/settings/camera
-delete camdriver0.dat (by pressing f8)
-browse to the new superdriver camdriver0.dat in the right screen
-Copy it to the phone (F5-->press enter)
-Quit Far manager (To be sure go back to FS by clicking on the ".. , then say yes to the loader thing)
-remove and replace the battery
-Turn on your phone (takes a little longer)
-Go to camera mode
-press >*<<*< (ignore the light)
-check by zooming (it shouldn't zoom)

Done

[ This Message was edited by: Duran on 2006-11-28 17:12 ]

Posted by Cold Fusion
[quote]

-download the file
-download far manager: http://farmanager.com/files/FarManager170.exe
-download the SEPF plugin: http://sephone.nm.ru/tools/SEFP010044.zip (put it in the far managerplugin folder
-make sure you have k750's flash driver installed
-turn off your phone
-open far manager
-press f11 and choose SEPF plugin
-Choose: DCU-60, 921600, k750_w800_Cid36
-press enter the matrix
-Hold C on the phone, and connect the cable to the phone
-Choose FS
-go to ifs/settings/camera
-delete camdriver0.dat (by pressing f8)
-browse to the new superdriver camdriver0.dat in the right screen
-Copy it to the phone (F5-->press enter)
-Quit Far manager (To be sure go back to FS by clicking on the ".. , then say yes to the loader thing)
-remove and replace the battery
-Turn on your phone (takes a little longer)
-Go to camera mode
-press >*<<*< (ignore the light)
-check by zooming (it shouldn't zoom)

hey where do you find the K750's flash driver???
By way i have a W800i. Is the k750's flash driver gonna work on my w800i??


Posted by Duran
Quote:

On 2006-11-28 18:32:31, Ricky_bad420 wrote:
hey where do you find the K750's flash driver???
By way i have a W800i. Is the k750's flash driver gonna work on my w800i??



Its on the CD you get with the phone.
W800 has its own driver..so yes it works, but im not sure of the camera driver will work for the w800.
If you insert the CD, hold C and turn on your phone it should give you the driver prompt

Posted by dennis.l
Hi chengrong,

Thanks for your driver. I found it to be really good except it takes me about 5 to 10 goes to go into the supermode each time I turn on the camera.

My joystick is not working properly and I can only go right in the horizontal mode but left works only 1 out of 5 times..

I think this is a common problems with K750i and w800i. there is probably quite a few people out there with partly faulty joysticks. that is why they compain that supermode is not working.

is it possible to change how the supermode is activated? such as a number code instead (eg, typing 12345 on the keypad)?

thanks

Posted by flintolino
Chenrong,

What is the base normal driver please? Sometimes I just need to open the camera real quick and take a picture of something funny for example, wich is impossible with supermode since I'd have to config everything before taking the picture.
But the normal driver has a very slow auto-focus/shutter and Im getting blurry pictures every time I use nightmode + normal mode.
Is there any handy config I could change to make the normal driver good for inside/dark pictures with nightmode?
Im asking this because today a friend asked me to take her picture and I was like: wait.. I have to configure the driver...
I took forever to do it hehehe ... sometimes we don't have enough time hehe
The reason Im asking this is because most of my pics are inside pics with low lights... those you take inside your car with your friends... or from some chick on the corridor.... Outside pictures are easier to configure, even using supermode... all I gotta do is use the landscape configs.
Indoor pictures are hard to configure...

@all
Has anyone found out a good setup for inside pictures, with fast shutter and low noise? A good config combo using supermode?
I don't really know how manual shutter and iso settings work...


[ This Message was edited by: flintolino on 2006-11-29 05:15 ]

Posted by ErnestoD
THANK YOU, THAT IS WATH I HAVE DONE BUT I WILL DO IT ALL AGAIN

Posted by harry23419
good driver

Posted by TheNerd
cant go in the super mode using the >*<<*< in horizontal mode.



Posted by Cold Fusion
Hey chenrong

I can't connect my w800 with my pc.
I hold the "C" on my phone,my pc shows usb flash drive found.
Then he want the driver.
After that my phone starts up. And the far manager can't connect as well.

Please tell me what to do????

Peace


Posted by flintolino
When windows asks for the driver, let it search for it automatically and install it.
Restart your pc.

Posted by ErnestoD
Dont worry thenerd, we are two now. It is impossible

Posted by flintolino
You guys know that there is no "welcome to supermode" message right?
Just switch back to 0.0 and use the zoom to check if its ok. It will get to 4.0 but I'll be 16x.
The easiest way of checking it in my oppinion is using 0.7 and moving the zoom... if the sreen starts to glow, its working.
Btw its horizontal mode exactly like my avatar
<-----
If you turn it to the other side you'll have to change the code...

[ This Message was edited by: flintolino on 2006-11-29 19:55 ]

Posted by TheNerd
Ok i got it working.
and i have a question,why do I need to shutter speed functiom (just for my knowledge)??



Posted by Duran
Quote:

On 2006-11-29 21:48:16, TheNerd wrote:
Ok i got it working.
and i have a question,why do I need to shutter speed functiom (just for my knowledge)??



you could use the shorter shutter speed to capture high speed moving objects.
Without the shutter speed the object (car? etc) would be blurry

Posted by bono.bel
hi friends
how can i download from the link http://www.filefactory.com/file/19aedb/

i already register but can't find a way to download from?

Posted by flintolino
@Duran

What config are you using. This driver is everything but If I don't learn how to use it Ill have to switch back to one of the older ones. It's been hell to me to take pictures with low light. They all come blurry because of the shutter speed... and If use faster shutter it comes blurry due to sharpness....
Not sure what Im supposed to do here....
I wish the normal driver was more like 2.41 or something.. so we could use it when we don't have time to config the supermode.

Posted by smuko
@TheNerd
The shutter speed function is the one that I use the most. If you want to capture moving objects, you use higher speed - you'll get darker pictures but they won't be blurry. On the other hand, if you're shooting in poor light conditions, you can use slower speed.

@chengrong
It will really be cool if we can use 2.441 settings in normal mode! Hope it is possible!

[ This Message was edited by: smuko on 2006-11-30 09:36 ]

Posted by norbi_nw
Hi guys... i was very happy with the driver, but today when i changed to -1,3 and -1,7 EV, and pressed + to increase, the phone restarted. This happened only today. In the other hand, it would be nice to have the zuza 1 or 2 or 3 (the 1 thats better) for normal mode (when you dont have time to activate SuperMode). Increase the FPS to 17 (i got variable FPS :/ ) and... thats about it )

Posted by eeiba
Is there any way this camera driver, which is awsome by the way, can be edited to add the fuctions to the standard camera menu? I know this is too much to ask, not being a programmer myself, but I find it a little difficult to access the supermode. You guys know how it is with some oldeer K750 where in the joystick can be a little problematic. Anyways, its a great idea wouldn't it. Thanks.

Posted by biasiman
Can smone just post a pic taken in night mode?

Posted by bono.bel
Quote:

On 2006-11-30 01:10:31, bono.bel wrote:
hi friends
how can i download from the link http://www.filefactory.com/file/19aedb/

i already register but can't find a way to download from?


any answer plz, or can somone upload the file in rapidshare, i still can't download it


thanks

Posted by TheNerd
Quote:

On 2006-12-01 00:23:20, bono.bel wrote:
Quote:

On 2006-11-30 01:10:31, bono.bel wrote:
hi friends
how can i download from the link http://www.filefactory.com/file/19aedb/

i already register but can't find a way to download from?


any answer plz, or can somone upload the file in rapidshare, i still can't download it


thanks




click on the link,then click on "Download for free with FileFactory Basic" and then search for "download..." cant remember exactly

Posted by Cold Fusion
Quote:

On 2006-11-29 19:11:00, flintolino wrote:
When windows asks for the driver, let it search for it automatically and install it.
Restart your pc.



My pc asks me the software of the USB-flash drive,
i put my cd which i got with the phone and now he says
"The hardware was not installed because the wizard can not find
the necessary software"
What software must i install???

Posted by tranced
install this ones: USBFlash

Posted by chengrong
Quote:

On 2006-11-25 04:11:37, chengrong wrote:
Quote:

On 2006-11-25 03:24:58, QuickShare wrote:
Quote:

On 2006-11-24 15:43:31, QuickShare wrote:
Question,
Will the previous Shutter Speed setting still maintain on the Zoom Value of 1.2 or will it changed to Zoom Value 2.0 after the ISO setting was done?


@chengrong
can you confirm about this?




I think camera automatic exposure are still working.
can only choose one.
I can't sure that is correct. I don't have spend time to do a lot of testing.



In the new version, the issue was resolved. ISO and shutter speed can be adjusted individually.



[ This Message was edited by: chengrong on 2006-12-02 10:08 ]

Posted by gprsman
Hi to all ,

please uploaded in other host?

sendspace.com ?

thanks in advanced .

Posted by diego23
here you go, http://www.sendspace.com/file/or7qzi

Posted by gprsman
Quote:

On 2006-12-03 17:51:50, diego23 wrote:
here you go, http://www.sendspace.com/file/or7qzi



grazie

Posted by aaftab
My K750's is CID 49. Can i use the Super Cam Driver on my mobile ??? if yes HOW ? Coz when i use FAR it show only 2 folder FLASH and FS ... no further folders in FS ... why ?

Posted by Nastyd
Quote:

On 2006-12-04 08:23:35, aaftab wrote:
My K750's is CID 49. Can i use the Super Cam Driver on my mobile ??? if yes HOW ? Coz when i use FAR it show only 2 folder FLASH and FS ... no further folders in FS ... why ?

Why..? Because your mobile is CID 49. That isn't cracked right now... you will have to wait till it is...

Posted by Shiwantha
Dear Chengrong,
Im using your super cam driver and I got to say its great.
Here is a picture.



I wanted to ask you a favour.

Can you make the video to capture 320x240 sizes (but it will not be possible to view the video in the phone. Because phone does not support more than 176x144)

Im using fulltime super driver mode Thank you for your wonderful work.



_________________


[ This Message was edited by: Shiwantha on 2006-12-05 05:27 ]

Posted by rockygali
hey that was a good job... lucky for you, you can memorize the individual settings. oh i really love to use SUPER CAM driver fulltime...

but i cannot memorize the individual settings....

Posted by chengrong
Ultimately, everything becomes simple, we need to find a combination of these functions to simplify.

@ Shiwantha
About VR,I find some scattered information from the Internet, it seems difficult, but there is a slim chance I will not give up.

[ This Message was edited by: chengrong on 2006-12-05 07:06 ]

Posted by rockygali
i suggest to put the major settings on the keypads..

Like changing ISO, SPOT-ON/OFF, etc etc

then retain the minimal adjustments to the volume keys.

i think that will be easy... and much better if it comes with CAPTIONS, like to let me know that im on the ISO adjustment settings and stuff like that, or I am on the white balance or exposure settings.

Posted by chengrong
Quote:

On 2006-12-05 07:56:02, rockygali wrote:
i suggest to put the major settings on the keypads..

Like changing ISO, SPOT-ON/OFF, etc etc

then retain the minimal adjustments to the volume keys.

i think that will be easy... and much better if it comes with CAPTIONS, like to let me know that im on the ISO adjustment settings and stuff like that, or I am on the white balance or exposure settings.



No way at now. K750/W800 is a closed system. it is very hard.

btw ,Who done an experimental to improve the frequency of camera?

[ This Message was edited by: chengrong on 2006-12-05 07:21 ]

Posted by Shiwantha
@ rockygali
To have Supermode fulltime Chengrong mentioned it on the firstpage of this Topic


find the line:

seq_init=05 02 00 0B D0 #CMD_END
05 02 00 0C 07 #CMD_END
06 02 00 01 00 52 #CMD_END
05 02 00 18 00 #CMD_END

06 02 00 01 05 56 #CMD_END
06 02 00 01 01 55 #CMD_END
06 02 00 01 00 08 #CMD_END
$s0 09 $-0 0a 06 02 00 01 $w0 06 #CMD_END
$s6 7f
#GET_SENSOR_VERSION;

replace with

seq_init=05 02 00 0B D0 #CMD_END
05 02 00 0C 07 #CMD_END
06 02 00 01 00 52 #CMD_END
05 02 00 18 00 #CMD_END

06 02 00 01 05 56 #CMD_END
06 02 00 01 01 55 #CMD_END
06 02 00 01 00 08 #CMD_END
$s0 09 $-0 0a 06 02 00 01 $w0 06 #CMD_END
$s6 09
#GET_SENSOR_VERSION;

open camera direct into SuperMode.

@ Chengrong,

Thanks for trying to have video to capture 320x240 sizes.


@ All

If its difficult to memorise settings in supper mode, keep a sms template having all the information so you can refer it to get the best out of the camera




Posted by croatia
I'm not a stupid but i can't find a super camera driver on a web site from your first page of thread.if u want pliz send me a mail on damircroatia@vip.hr how i can download this driver into my k750i from filefactory i never do that be4 but i really wish :-) thanx very much

This message was posted from a K750i


Pages:
Previous  123 4 ... 198199200  Next
Click to view updated thread with images


© Esato.com - From the Esato mobile phone discussion forum