Posted by strizlow800
Download the right version of the SEFP plugin and the CID49 support file to open your W810 with FAR. In fact, you have to do something with Phone XS before opening the phone with FAR. Read this CID49 guide:
http://www.esato.com/board/viewtopic.php?topic=138615
Posted by n3o
does far manager 1.70 support CID 49??
Posted by Cold Fusion
CID 49 : They use phone XS 2 flash the fone with a fake MAIN fw so that far manager can read the fone as a CID 36. So u can do ur moddings using in FS but the fone wont work. U have 2 flash it again with the original fw 2 make it work again.
Posted by Superluminova
Can i use this with my k800i?
Posted by ozzyboy
great...i find it
Posted by fattail95
nice
Posted by emkila
Hi, I have a K800i Cid 52 running R1KG01. Dont know if anyone else has noticed this but when I hold "C" and insert the usb cable, the program seems to start up well then freezes just before it reaches the activating GDFS line.
Found a way around: Remove the battery from the phone, Press "enter the matrix". While holding down "C", insert your battery and without letting go of it, plug the usb cable to the phone.
It's only when I did this that I was able to properly access my FS.
I have now successfully tried out 3 different custom menus.
Hope it helps but sure it's been covered somewhere in this long thread.
Posted by klipsch
this is really helpful, answered alot of my questions.
anyway, i was wondering if you know where i can get SEFP plugin for my k800i? thanks
Posted by max_wedge
http://rapidshare.com/files/52048949/sefp.rar.html
Posted by norbi_nw
Ty very much. Now how do i start it? I dun wanna mess up my phone. Start FAR, run SEFP, and select db2020 and enter the matrix? I'm using K810i R6BC002. I'm scared, cuz no K810i was modded before (like this ... FAR).
Posted by rockygali
mine was modded many times... and im very comfy with FAR.. over XS++
no offense!
i have modded:
- Acoustics
- Menu & Layout
- System fonts
- Startup - shutdown screens
and i havent encountered any probs yet as of now... but be careful!
as always.. you can never back up your files.. but there are K810 files out there.. sadly all of em are around Europe.. mine is APAC.
Posted by norbi_nw
yeah... i live in europe
But how do i backup a file then? can i do it with XS++? or redirect me to a link with camera and accoustics files backed up (k810i R6BC002) thanks
Posted by max_wedge
you can't back up ANY files from the K800, except it's GDFS, which you need setoollite. But that doesn't back up files like camera, acoustic drivers etc.
The GDFS is important to back up, it can save your phone if you brick it (depending on what bricks your phone).
I just got the R6 firmware, I've extracted the FS, I'll post it shortly.
Posted by norbi_nw
R6? is it available for k800i? or R6 from K810i? P.S. I got your backup pack for r1kg001. thx and waiting for the r6. Also it is "almost" impossible to brick your phone by modding camera and accoustics. If anyhing goes wrong, you just backup. right?
(plz say yes)
Posted by max_wedge
On 2007-08-30 16:09:23, norbi_nw wrote:
R6? is it available for k800i? or R6 from K810i? P.S. I got your backup pack for r1kg001. thx and waiting for the r6. Also it is "almost" impossible to brick your phone by modding camera and accoustics. If anyhing goes wrong, you just backup. right?
(plz say yes)
R6 for K810 (in answer to the guy who asked about K810 R6 FS files.)
It's never impossible to brick your phone
All care must be taken. That said, changing files in the file system, there is not much danger of stuffing anything up that can't be fixed with either a restore of the relevant original files, or a full flash (or FS flash).
Flashing the phone with other firmwares however, you should be a lot more careful.
Posted by norbi_nw
thx max (again). i dun wanna flash my phone with another fw. R6 is ok.
Posted by whitehackker
im using the latest version of FAR manager and 0.10.0.44 plugin with my k800i R1KG001 APAC db2020 cid52 red
i can browse and put files into my FS but why can't copy files from fs to my pc??
all files copied from fs are 0kb...
need your answers....pls..
thanks and God bless
Posted by tranced
@white: i think you'll find your answers here
The flashing/modding thread - All phones - CID 51/52 now supported
or here
Finally - FAR access to K800
_________________
i
jay0726||i clara||most helpful member, according masseur||Esato Awards 2007 RESULTS![ This Message was edited by: tranced on 2007-09-04 16:15 ]
Posted by whitehackker
thank....
Posted by hragsarkissian
Is it compatible with the new W810 CID 50 ?
Posted by hragsarkissian
bump for an answer
Posted by alap1983
1) Is there a guide for working completely with XS++
I ask this because XDS is GUI driven whereas FAR is Comandline.
2) What is this Gslide?
Can I use it to flash/patch/customize my W700i
Posted by macho
Its really great. This s wht i want exactly
thanks mate;-)
Posted by eygi
seems all the needed files were deleted already.. can u please re upload it.. thanks.. much much appreciated.
Posted by eygi
all the needed files for w800 cannot be downloaded.the links are gone.please re upload it.thanks again..
Posted by tranced
On 2007-09-29 17:14:28, alap1983 wrote:
1) Is there a guide for working completely with XS++
I ask this because XDS is GUI driven whereas FAR is Comandline.
2) What is this Gslide?
Can I use it to flash/patch/customize my W700i
1- Phone Flashing Tutorial XS++
2- i just used gslide once. i think this can patch the MAIN file, then you flash it either with far manager, xs or setool. more about gslide here: GSlide, [CID49 Patch and slide flashfiles]
Posted by kennyong88
why me far manager look like this?
Posted by subrata
Impressive tutorial boss.
Posted by andreiuc88
My phone is cid 52. What should i choose? i can find somethin with some 52 at the end but it doesnt say cid 52.
Posted by gaming_guy
How would i copy files off of a CID36 w800i using far and sepf (i use jdflasher for my k800 and k810)?
is it just a matter of selecting the files that i want to retrieve (photos) and hitting f5 to copy them to my hard drive?
thanks
Posted by tranced
@gaming_guy: in the left panel, highlight the desired file/folder and and in the right panel, select where you want to save it to.
when you have the desire path press copy and it'll be there after it's done.
Posted by gaming_guy
On 2008-04-14 18:12:17, tranced wrote:
@gaming_guy: in the left panel, highlight the desired file/folder and and in the right panel, select where you want to save it to.
when you have the desire path press copy and it'll be there after it's done.
thanks for that tranced!