Welcome to Esato.com


Pages:
Previous  123 ... 899091


K800 Firmware Overview


Click to view updated thread with images




Posted by mozzy91
hi i have a k800i on orange and i put a phone lock code on it for if any one tried to steal it and i have forgot the code and can't get into my phone would i have to flash the phone or is there a way around it


Posted by rehankhan
unlocked my sim on patch here it is the link go and download it website in the frm http://www.howardforums.com/archive/topic/1306915-1.html

Posted by surfer2008
Contact your phone network would be my first suggestion they may have an unlock code which will unlock your phone (you could try a master reset but this probably would not work).

Good luck


Posted by surfer2008
A friend of mine has a Sony Ericsson K800i on o2 UK.

It has various software problems.

1) Bluetooth Connectivity (drops randomly)
2) Thumbnails sometimes duplicate and sometimes show the wrong thumbnail image.
3) Phone Crashes randomly
4) Best Pic Option does not work

I tried update it about a month ago on seus and it said i had up to date firmware but having checked on the net my firmware dates back to july 2007.

Are there no new updates for K800i on o2 UK?

If so will it cure all the above faults?

Also second problem was that when shopping around town text message beeps happened and when the phone was checked somehow 4 games had been ordered off the sim card (My friend had not done this (I was with him at the time, there were no games on the phone and the data counter was zero).
Now he is trying to get the money back off o2 and they dont want to give it back.

A bugged phone and now being visited by The Sheriff of (o2) Nottingham or some idiot who may have ordered games with the wrong mobile number.

Either way my friens is on a fight to get the airtime back with my local trading standards from o2.
Funny enough when the phone was bought

[ This Message was edited by: surfer2008 on 2008-04-25 12:06 ]

Posted by mozzy91
I am going to try and use xs++ and see whether xs++ v3.1 to try and reset the code. The problem with the k800 on o2 sounds like a virus to me but could also be a hardware fault

thank you

Posted by ronnyo
I'm trying to update my K800 from R1KG001 (EU4) to R8BF003 by SEUS but getting the message "update not available". Tried two different K800 both with the same result. According to SonyEricsson support center the update is available. Any ideas?


Posted by mozzy91
Ronnyo,

I would try and use xs++ but it isn't working for me. I still cannot get my phone to connect up and i have tried everything, even installing pc suite first. Do you have to be connected to the internet at the time or what??? Please help me!!!

Posted by ikang
hi guys.....
can any1 give the link for k800 R8BF003 FS China pleaseee... i need this for backup.

[ This Message was edited by: ikang on 2008-05-01 10:38 ]

Posted by contente
does anyone have r8bf003 or r8bc004 in europe_1 ?

because i only can find r8ba024 in europe_1 :|

Posted by tranced
in http://cybershot.4shared.com there's a K800_R8BF003_FS_S_E_EUROPE_RED52.rar, but it doesnt say what EUROPE it is.

give it a go if you desire

_________________
i jay0726||i missing clara ||most helpful member, according masseur||telefonicos

[ This Message was edited by: tranced on 2008-05-04 05:38 ]

Posted by contente
it's south europe. it doesn't include portuguese language :/

Posted by momuchi
I see R8BF003_FS_APAC_WI_RED_CID52 in this website, http://bbs.blueshow.net/read.php?tid=455498&fpage=5

anyone can help to download and upload at 4shared...



[ This Message was edited by: momuchi on 2008-05-11 06:14 ]

Posted by elsuirad
After I use SEUS on my K800i, It updates my mobile phone's software and I get this..

Current Software Version:
CXC1250210
R1ED001
060831


but when I surf the Yahoo! website and try to download Yahoo Go, they told me that I have to get the latest Firmawe because its not yet updated.

How come every time I tried to check my phone for the latest update, they (Sony Erricsson site) keep on telling me that its already updated?

Can someone tell me what are the following Software versions and their release dates? And where can I find them If I can't do it or get the latest via my K800i, at least I can download it via PC.

Thanks in advance.

_________________


[ This Message was edited by: elsuirad on 2008-06-08 05:34 ]

Posted by tphg

On 2008-05-11 07:13:58, momuchi wrote:
I see R8BF003_FS_APAC_WI_RED_CID52 in this website, http://bbs.blueshow.net/read.php?tid=455498&fpage=5

anyone can help to download and upload at 4shared...



[ This Message was edited by: momuchi on 2008-05-11 06:14 ]

I've already registered an account in this Chinese page (in fact, this account is registered by my friend, i cant read Chinese), but it says i must have enough points to download anything. I cant get point by joining this forum and posting something, as i could not understand Chinese.

[ This Message was edited by: tphg on 2008-05-12 14:08 ]

Posted by alfath
sory guys, i have question bout those firmwares.. is it possible to flash main using R8BF and FS using R1KG? i just wonder if it can what advantages we get?

Posted by BlacK Devil
Hi all,
I have a serious problem with my k800, i can't hear nothing through the ear-piece when i'm making or receiving a call (putting it on speaker seems to do the job but it ain't no ear-piece , handsfree doesn't work either )

I had this problem before but it fixed its self after i connected and disconnected the phone from the computer, but now it doesn't seem to work. I've tried re-booting the phone, leaving the battery out for a few minutes but it's not working...

Right now the phone has R1GB001 firmware and i'm tempted to upgrade but i don't know if it's worth going to CID 53...
btw, can i upgrade firmware without going to CID 53 ?
Do you have any suggestions ? thx

_________________
K800 and bugsiiy's n93

[ This Message was edited by: BlacK Devil on 2008-05-13 21:22 ]

[ This Message was edited by: BlacK Devil on 2008-05-13 21:33 ]

Posted by alfath
@black devil
In my opinion it doesnt worth yet to upgrade to cid 53 since there's no way to modify cid 53 for now. U can upgrade the firmare using setool2lite or xs++ without upgrading the CID bro.. U can find what files u need to upgrade on tutorial

Posted by jrocks0829
you may download the latest firmware for sony ericsson k800i R8BF003 @ http://www.josephsator.info/2[....]icsson-k800i-firmware-r8bf003/

Posted by BlacK Devil
Good news ...
It seems that my k800 has a habbit of mending its self, after a day of talking on it only over the speaker today when i received a call i forgot to put it on speeker and just put it to my ear ... and the earphone was working

Looks like i won't be upgrading it at least until CID 53 is moddable

Posted by r3z
Had a few problems with my K800 today (wouldn't power on/red IR LED flashing) and after I fixed it I thought I might as well get it upgraded to the latest firmware while I was at it.. now I think I preferred how it was before.

It was originally an unlocked Vodafone UK (CDA102511/15) model with R1CE001 firmware and I flashed it for the first time to R8BF003 - flashed ok, no problems.

However, the new firmware seems to be lacking a couple of features which I used all the time and I can't believe they're not standard features in new firmware!? - first thing is there is no popup shortcut window on the home screen, which was great for keeping a list of common shortcuts and also managing Java apps when you have a few running at the same time.

Second, I no longer seem to be able to use the K800 as a bluetooth remote control (HID) for my laptop.. is this really not a standard feature in these firmwares?

I didn't really mind how the phone ran before (it was a bit sluggish), but after seeing the list of bug fixes and improvements thought I might as well, and having track titles show up on my bluetooth headphones is also a nice bonus.. but if I knew these 2 features above would be lost I wouldn't have bothered.

Could anyone tell me if any other newer firmware apart from R8BF003 has these features, or if it's at least possible to install bluetooth HID function?
If not, I would appreciate if anyone has a link to original Vodafone R1CE001 firmware so I can downgrade.


EDIT: right, found out that the call/hang-up buttons are now remapped to being internet/popup menu buttons, and found remote control is now in Entertainment (although the backgrounds for hid files is not full-screen?).. would still prefer to go back to Vodafone branding tho, so if anyone could point me in the right direction for the firmware I'd appreciate it.

[ This Message was edited by: r3z on 2008-05-16 23:18 ]

Posted by r3z
Found R1KG001 Vodafone version and have flashed it again.. but I've got a problem with the toolbar on this one too - it only seems to come up when a new event occurs, and there is no way to call it up otherwise!? It's pretty stupid as the top-right key is doing nothing when on the home screen. Is there any way to get to the toolbar manually?

For me the only real bonus over the original firmware is that the track display is working on the bluetooth headphones, but I'd take the convenience of the toolbar shortcuts over that, so if anyone has a solution or otherwise a link to the original firmware I would still appreciate any suggestions.

Posted by nabelon
i find that my k800i after flashing to r8ba024 , the scrolling of msgs in the inbox is not as smooth as before, is this normal ?? i find it irritating

Posted by Earect
I just updated the firmware of my K800i to the newest R8BF003 CID 52.
I used:
-MAIN: K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn
-FS: K800_R8BF003_FS_S_E_EUROPE_RED52.fbn
-The finalization was done by xs++ (europe 3).

The problem is that I don't have the Dutch language anymore...
Therefore I need Europe 3 or better the Belgium-version.

(See this site: http://www.wotanserver.com/en[....]e-r8bf003-cid52-languages.html

==> Generic Trade Belgium
Languages: English, Dutch, French, German
T9: English, Dutch, French, German

or
==> Generic Europe 3
Languages: English, Dutch, French, German
T9: English, Dutch, French, German )

Does anbody know where to find these? I searced at sek750i and iprotebe, but there are only central europe files...

It may also be an older firmware version. I would appreciate it! Thanks in advance.


Posted by mhwatson
Hi,

You could always flash to k810i (R8BA024)- Europe 3 is available for that I think. Worked good for me.

Martin.

[ This Message was edited by: mhwatson on 2008-06-20 23:55 ]

Posted by Earect
yep I know.. thought about that too. But I wanted to hear first if Europe 3 or Belgium wasn't available somewhere..

Posted by somebozo
I just flashed mine k800 R1JG001 M_EST_N_AFR with GENERIC_S_ASIA_LEVAN R8BF003 and so far so good. I have got latest text, video cam drivers and JAVA 7.7 but the phone still reads M_EST_N_AFR in software info under service menu. below is log dump

11:37:36| Platform: DB2020
11:37:36| OTP CID: 51
11:37:36| EROM CID: 53
11:37:36| EROM Color: Red
11:37:36| IMEI: 35908801xxxxxx
11:37:36| Phone ID: K800
11:37:36| Region: M_EAST_N_AFR
11:37:36| CDA: CDA102568/6 R8A
11:37:36| Firmware Version: R1JG001
11:37:36| EROM: R3A022

not bothered as long I have the latest firmware and the bugs fixed..but I have to say, the service menu info can be misleading sometimes.

[ This Message was edited by: somebozo on 2008-06-22 15:49 ]


Posted by sonusingh27
What are the exact differences between R8BA024 and the newer R8BF003.

The only thing I can see is an newer LCD version. Has this made a difference?

Anyone notice anything else?

Posted by unforgiven_sh
original text from the se-world.info K800 changelog page:

R8BF003 - Beobachtete Änderungen:
Video-Bug aus R8BA024 behoben
Stabilität verbessert

or:

R8BF003 - Noticed Changes:
Video-Bug from R8BA024 removed
Increased Stability

i hope this is helping

Posted by sonusingh27
Thanks, appreciate it!

Posted by Sky Hi
Will there ever R8BF003 (MEDITERRAN) for k810 be on SEUS?

Posted by deadman4168
I just updated the firmware of my K800i to the newest R8BF003 CID 52.
I used:
-MAIN: K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn

but i didnt update the FS..

now i dont get the 123 option when pressing # while writing a message...

any suggestions

Posted by centur

On 2008-07-25 09:47:21, deadman4168 wrote:
I just updated the firmware of my K800i to the newest R8BF003 CID 52.
I used:
-MAIN: K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn

but i didnt update the FS..

now i dont get the 123 option when pressing # while writing a message...

any suggestions



Menu > Settings > General > Language > Writing language > mark all then click Save

Posted by cocico

On 2008-06-20 21:21:11, Earect wrote:
I just updated the firmware of my K800i to the newest R8BF003 CID 52.
I used:
-MAIN: K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn
-FS: K800_R8BF003_FS_S_E_EUROPE_RED52.fbn
-The finalization was done by xs++ (europe 3).

The problem is that I don't have the Dutch language anymore...
Therefore I need Europe 3 or better the Belgium-version.

(See this site: http://www.wotanserver.com/en[....]e-r8bf003-cid52-languages.html

==> Generic Trade Belgium
Languages: English, Dutch, French, German
T9: English, Dutch, French, German

or
==> Generic Europe 3
Languages: English, Dutch, French, German
T9: English, Dutch, French, German )

Does anbody know where to find these? I searced at sek750i and iprotebe, but there are only central europe files...

It may also be an older firmware version. I would appreciate it! Thanks in advance.



Has someone found that firmware with Dutch included? I still run R1ED001 and I'd like to update my K800i Allure Brown

Posted by thefabie
what generic n firmware should i choose.. i want to upgrade my phone k800i to k810 > what language

12:17:42| Baseband ID: 9900

12:17:42| Protocol Version: 3.1

12:17:42| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800)

12:17:42| ...using GDFS name

12:17:42|

12:17:42| Profiling SEMC phone...

12:17:42| Platform: DB2020

12:17:42| OTP CID: 51

12:17:42| EROM CID: 53

12:17:42| EROM Color: Red

12:17:42| IMEI: 35427102xxxxxx

12:17:42| Phone ID: K800

12:17:42| Region: APAC

12:17:42| CDA: CDA102568/101 R8A

12:17:42| Firmware Version: R8BF003

12:17:42| EROM: R3A022


----------------

Posted by niklovely
I just wanted to remove java security as well as be able to apply some patches..
do i need to upgrade my firmware. i am using k800i r1je001 of 3 network australia unlocked.(using in india)
i really want patch that removes sms delivery report after 5 seconds..
is it available on my firmware too or i should upgrade.
( i have downloaded r8bf003 from link posted in previous page..)
please suggest.

Posted by reggaedave
Bin around a bit but not really posted b4.I have the old faithful k800i db2020 cid 53, still no firmware out an about yet? is that still the case....Will have to just stick to the old little far manager drag an drop style for now.mite as well go an by an iphone an mod away at this rate!!! RGA.

Posted by Earect
I use XS++ to finalize my K800i. I flash it with "custpack" Europe 3. Europe 3 is the UK, Belgium, France, ... but when I want to change my language for the phone and writing, I only have English (for the phone) and some Central European languages (writing).

I used the Central Europe firmware, so I know why this is so.
But what is the point of the finalization, the flashing??? I want the Dutch language (for writing)!!

Posted by Amos Bernar
i have the drivers for xp but does not work and need the k800 sony ericsson for windows vista unless someone knows another way to transfer my photos from the phone please tell me?

_________________
Cosmetic dentist in Southampton
[ This Message was edited by: Amos Bernar on 2009-04-22 07:21 ]


Posted by sathurn
hi guys...anyone has got K800 - R8BF003 FS EUROPE 5 - RED52....i need italian language....thank you

Posted by geminixx
How can i get it? Im in Jamaica, dont have a credit card and SEUS telling me i have the latest firmware (RIED001) My games and applications arnt opening.....

Posted by msyarif
hi guys.... i love this thread.

after upgrade my firmware to R8BF003, successfull. after 3 month, anyway now... i have problem, suddenly my k800i said "no access to network" ... with icon "no call" on side of signal bar.

1. i try to switch off and on .. nothing happen
2. i try to remove baterry for while , nothing happen.


need guidences or support here...

thanks
Syarif

Posted by suresh86
Change sim card and see if that helps, otherwise you can reset settings of the phone.

Posted by shmm6991
Hi everyone!

Let me start by saying that I am new to this forum. I have a problem with my SE K800i because it always gets a white screen and then reboot with it disconnected for few seconds and it happens every 5 seconds. I have my K800i about 1 years already in the closet because my SE phone sent back to me by SE and they told me it is "repaired" but it is not repaired.

Now I have tried everything to repair it but no luck.

Can someone make a special little mini-tut about how my SE k800i can get working again?

Now every time I get to read at XS++

20:21:37 | TURN OFF PHONE!
20:21:37 | Hold 'C' button on phone and connect phone NOW.
20:21:37 | You have 30 seconds ...
20:21:37 |
20:21:40 | Baseband ID: 9900
20:21:40 | Protocol Version: 3.1
20:21:40 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:21:40 | ... using IMEI name
20:21:41 |
20:21:41 | Profiling SEMC phone ...
20:21:41 | Platform: DB2020
20:21:41 | OTP CID: 49
20:21:41 | EROM CID: 53
20:21:41 | EROM Color: Red
20:21:41 | IMEI: 35570401xxxxxx
20:21:41 | Phone ID: K800
20:21:41 | Region: EUROPE_4
20:21:41 | CDA: CDA102779/78 R7A
20:21:41 | Firmware Version: R8BA024
20:21:41 | EROM: R3A022
20:21:41 | Ready for operation!


But every time I want to update R8BF003 RED 53 will I read

20:22:23 | TURN OFF PHONE!
20:22:23 | Hold 'C' button on phone and connect phone NOW.
20:22:23 | You have 30 seconds ...
20:22:23 |
20:22:26 | Baseband ID: 9900
20:22:26 | Protocol Version: 3.1
20:22:26 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:22:26 | ... using IMEI name
20:22:26 |
20:22:26 | Profiling SEMC phone ...
20:22:26 | Platform: DB2020
20:22:26 | OTP CID: 49
20:22:26 | EROM CID: 53
20:22:26 | EROM Color: Red
20:22:26 | IMEI: 35570401xxxxxx
20:22:26 | Phone ID: K800
20:22:26 | Region: EUROPE_4
20:22:26 | CDA: CDA102779/78 R7A
20:22:26 | Firmware Version: R8BA024
20:22:26 | EROM: R3A022
20:22:26 | Ready for operation!
20:22:29 | Sorry, your phone is NOT SUPPORTED
20:22:29 | Error: Can not send flash loader
20:22:29 | Error: Flashing failed
20:22:31 | Disconnected ... Unplug the phone


I know it's an old phone, but i just love the looks of it... can someone help me out? i would be really happy for it...

Mini-tut like what firmwares i need, where can i download it en with what can i install it.........


THANNNKKKKSSSS!!!!

Posted by centur

On 2010-01-27 20:26:25, shmm6991 wrote:
Hi everyone!

Let me start by saying that I am new to this forum. I have a problem with my SE K800i because it always gets a white screen and then reboot with it disconnected for few seconds and it happens every 5 seconds. I have my K800i about 1 years already in the closet because my SE phone sent back to me by SE and they told me it is "repaired" but it is not repaired.

Now I have tried everything to repair it but no luck.

Can someone make a special little mini-tut about how my SE k800i can get working again?

Now every time I get to read at XS++

20:21:37 | TURN OFF PHONE!
20:21:37 | Hold 'C' button on phone and connect phone NOW.
20:21:37 | You have 30 seconds ...
20:21:37 |
20:21:40 | Baseband ID: 9900
20:21:40 | Protocol Version: 3.1
20:21:40 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:21:40 | ... using IMEI name
20:21:41 |
20:21:41 | Profiling SEMC phone ...
20:21:41 | Platform: DB2020
20:21:41 | OTP CID: 49
20:21:41 | EROM CID: 53
20:21:41 | EROM Color: Red
20:21:41 | IMEI: 35570401xxxxxx
20:21:41 | Phone ID: K800
20:21:41 | Region: EUROPE_4
20:21:41 | CDA: CDA102779/78 R7A
20:21:41 | Firmware Version: R8BA024
20:21:41 | EROM: R3A022
20:21:41 | Ready for operation!


But every time I want to update R8BF003 RED 53 will I read

20:22:23 | TURN OFF PHONE!
20:22:23 | Hold 'C' button on phone and connect phone NOW.
20:22:23 | You have 30 seconds ...
20:22:23 |
20:22:26 | Baseband ID: 9900
20:22:26 | Protocol Version: 3.1
20:22:26 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:22:26 | ... using IMEI name
20:22:26 |
20:22:26 | Profiling SEMC phone ...
20:22:26 | Platform: DB2020
20:22:26 | OTP CID: 49
20:22:26 | EROM CID: 53
20:22:26 | EROM Color: Red
20:22:26 | IMEI: 35570401xxxxxx
20:22:26 | Phone ID: K800
20:22:26 | Region: EUROPE_4
20:22:26 | CDA: CDA102779/78 R7A
20:22:26 | Firmware Version: R8BA024
20:22:26 | EROM: R3A022
20:22:26 | Ready for operation!
20:22:29 | Sorry, your phone is NOT SUPPORTED
20:22:29 | Error: Can not send flash loader
20:22:29 | Error: Flashing failed
20:22:31 | Disconnected ... Unplug the phone


I know it's an old phone, but i just love the looks of it... can someone help me out? i would be really happy for it...

Mini-tut like what firmwares i need, where can i download it en with what can i install it.........


THANNNKKKKSSSS!!!!


Read here: http://www.esato.com/board/viewtopic.php?topic=170737 and use these files:

K800_R8BF003_MAIN_GENERIC_WI_RED53
K800_R8BF003_FS_EUROPE_4_RED53
HB1-06_Generic_CDA102568_13_R4A_GENERIC_EUROPE_4

Firmware can download from here: http://www.esato.com/board/viewtopic.php?topic=193451#post2891032
[ This Message was edited by: centur on 2010-01-27 20:06 ]


Posted by shmm6991
Thank you for your fast replay, sorry for my late replay ..
I will try this as soon as possible and will replay to this forum again!
But thank you very much for the help!

edit*

centur:

Thank you for you great help!

I have the K810 firmware and my white screen+restart problem is solved!

Thank you 1000 times!

Cheers

Edit 2*

Nevermind ... white screen + restart is still the problem .. .:S
[ This Message was edited by: shmm6991 on 2010-02-06 21:42 ]


Posted by pl4za
hi
i have a k800 with k810 firmware K810 R8BA024.

i wan't to update to k800 R8BF003 but i have some questions:

1- my phone is cid 52, i need to download R8BF003_RED52 right ? because for my region (europe1) i can only find cid53

2- If i put cid 53 can i still use patches ?

that's all !
Regards

Posted by RocKass
Hellow i`m new here, my name is Alex and i have an SE k800i about 3 years from Romania`s Vodafone but i fact it is from Germany O2. Sorry for my english but i`m not too good and i will make some mistakes. A few mots ago when i pug-in to my pc, my phone was virused and the problems become. Now i want to resoft and i need some help, i searched all the google and i found thousens of infos but i`m lost. i just downloaded XS++ i connected my phone and this is :

17:43:33| XS++ v3.1 (Darwin) Ready !
18:27:14|
18:27:14| Attempting to open the interface...
18:27:14|
18:27:14| TURN OFF PHONE!
18:27:14| Hold 'C' button on phone and connect phone NOW.
18:27:14| You have 30 seconds...
18:27:14|
18:27:23| Baseband ID: 9900
18:27:23| Protocol Version: 3.1
18:27:23| Phone name detected!
18:27:23|
18:27:23| Profiling SEMC phone...
18:27:23| Platform: DB2020
18:27:23| OTP CID: 49
18:27:23| EROM CID: 49
18:27:23| EROM Color: Red
18:27:23| IMEI: 35471601xxxxxx
18:27:23| Phone ID: K800
18:27:23| Region: EUROPE_2
18:27:23| CDA: CDA102511/74 R10A
18:27:23| Firmware Version: R1EG001
18:27:23| EROM: R3A016
18:27:23| Ready for operation!
18:27:36| User chose NOT to update EROM CID!

what i must do next ?! to upgrade ? and how can i install Generic Mediterrain

Posted by Wonderio619
What about changelog for R8BC004 and R8BF003 ?
R8BA024 is the last one, presented in main post.

Posted by *Jojo*
I remember this fone model has the BEST camera out in the market during it's release ! Better than it's counterparts: Nokia, Motorola and Samsung !


Pages:
Previous  123 ... 899091
Click to view updated thread with images


© Esato.com - From the Esato mobile phone discussion forum