Posted by aremaboy
Try again. WotanServer has released the latest 1.0.001 client. It may solve the problem.
Posted by sieskei
Hey guys,
i have one question.
If i click on K810 in SEUS and connect my SE K800, the phone can be updated with K810 firmware ?!
My K800 now with R1KG001 CID52. I read this in wotanserver.
| Code: |
|
10x
Sorry for my bad english !
Posted by kotsianis7
No,it's not possible!Your phone will be recognised as K800,even if you select K810!also,in case you have updated it with K810 and connect it with SEUS,it will be recognised again as K800 and some parts of its software which are common in both models will be replaced with K800's software & in software menu will be named K800!!I know it's very strange but that's how SEUS works!It recognises imitation K810s!!He he!Probably of their EROM string which is different on K800s or from their IMEI number!
This message was posted from a S700i
Posted by kimot01
when will the next f/w will be released?
Posted by sieskei
@kotsianis7 10x for info.
On 2007-08-09 17:14:26, kimot01 wrote:
when will the next f/w will be released?
I think that R1GK001 will be last f/w. ;(
Sry for english.
[ This Message was edited by: sieskei on 2007-08-09 17:36 ]
Posted by lheianne
hi this is my phone
21:33:20| PORT STATUS: ACTIVE
21:33:20| DBID: 9900 (db2020)
21:33:20| proto: 3.1
21:33:20| phone name detected
21:33:20| ++++++++++++++++++++++++++++++++++
21:33:20| PHONE INFO
21:33:20| ++++++++++++++++++++++++++++++++++
21:33:20| DBID: db2020
21:33:20| OPT CID: 49
21:33:20| EROM CID: 52
21:33:20| EROM color: red
21:33:20| IMEI: 35399601xxxxxx
21:33:21| Phone: K800
21:33:21| Operator: APAC
21:33:21| CDA: CDA102568/101 R5A
21:33:21| Firmware: R1KG001
21:33:21| EROM: R3A016
21:33:21| ++++++++++++++++++++++++++++++++++
21:33:21| ready for operation!
can i flash it using phone-XS 2???? pls can someone tell me....
Posted by feco
you have CID52.. No u cant
Posted by kimot01
hope SE will release a new F/W
Posted by TheNerd
does anyone know wheather they will release a firmware that improves the camera quality (the compression is to high)?
Posted by aremaboy
I think there will be no firmware revision anymore for K800i.
Posted by ValUs
when i am writing a sms longer then 8 sms (1280 letters) my k800i, just reboot.. not all the time, but many times.. i have the lates firmware on i for WOTA..
Posted by aremaboy
| Quote: |
|
WOTA?
Posted by ValUs
Okay,,
R1KG001 - Released on Wotan (23/4/07)..
Posted by aremaboy
K790i R6BC002 is already out for some CDAs dan branded phones. As usual, it's on WotanServer. At least there's a hope for K800i as well..
Posted by TheNerd
I have : R1ED001 firmware ,and when I try to update via SEUS,it says that this is the latest firmware... is that so?
its quite old.
Posted by tranced
SEUS, sometimes, is not that effective. it's better to spend a bit of money and do it with Wotan.
Posted by aremaboy
Exactly. SEUS has been troublesome lately. Too many people reported incomplete or stuck update resulting in bricked phones.
Posted by tranced
and because of this you will see aremaboy redirecting you to............... www.wotanserver.com
i couldnt resist to do it
@aremaboy: im kidding only
Posted by Alex86
can I unlock my k800 via kulankendi.com?
firmwire is R1GB001 CID49
Posted by aremaboy
| Quote: |
|
I was about to say that, tranced
Posted by pedrops
Hey!
Last week I updated thru SEUS to R1JG001.. and it was very good, with the movie preview.. louder earpierce
and don't know why, yesterday I plugged my k800, and ran SEUS agains... and it uptaded to R1KG001...
and.. f**k!
The browser button now wakes up the phone ang go to internet... no preview
So, beside the java improvment [7.3 to 7.4]... what is better in this new firmware?
That bowser button is annoying... prefered it when it had to be "long pressed" to go....
=(
Posted by hanugro
On 2007-08-16 23:22:00, pedrops wrote:
The browser button now wakes up the phone ang go to internet... no preview
So, beside the java improvment [7.3 to 7.4]... what is better in this new firmware?
That bowser button is annoying... prefered it when it had to be "long pressed" to go....
=(
Look at page 1 of this thread. I also think R1KG is lauder than R1JG (Maybe something to do with the doctor that check my ear recently).
Anyway I also prefer the old behaviour of internet button).
Posted by tucurel_day
i have k800i cid 49 FW R1ED001 what do you suggest ? should i change it ?
Posted by max_wedge
You can create your own homepage html file to set as the homepage (so the browser doesn't go to the internet when you press the browser button:
you create a html file that you want to appear as your homepage instead of your provider's website. you then save that file (let's call it for example file.html) in "other" in internal memory and on the phone you create a bookmark to file:///usb/other/file.html. If you send the file via bluetooth it get's saved in "saved_pages" on memorystick so in that case us file:///card/webpage/saved_pages/file.html. Open the bookmark, then set it as the homepage in the internet profile.
(won't work on some brandeds)
Posted by Chin
Hi All,
Not sure if this was caused by f/w update but my phone is missing its text-to-number switching feature in SMS typing/writing message screen. Usually you can switch over from text to number by pressing hex (#) key for several seconds, but after upgrading to R1KG001 this feature is missing...
Any thoughts?
Cheers.
Posted by aremaboy
| Quote: |
|
Go to Setting-General-Language-Writing Language-tick the number option. Good luck.
Posted by chili
Hi everyone,
I noticed that for almost every fw update, there is a change to the "text engine" version (e.g. BJ, BT, CB, etc.). Would appreciate it if someone will confirm what "text engine" is, and how it affects the phone's functions. Is this the T9 and/or multitap software? Thanks in advance.
Posted by aremaboy
| Quote: |
|
It's more to correct typo and rephrase commands here and there just to make the text more efficient I think.
Posted by fxss
Can i update my erom without flash my phone?
By other words, my phone is ok but sometimes has wsod! If the phone is running ok if update erom, he turns on without flashing?
Thanks!
Posted by aremaboy
| Quote: |
|
Sure. Just press 2 and 5 simultaneously on Wotan.
Posted by b70horn
Took a while, but managed to get R1KG001 for T-Mobile UK on SEUS today.
Posted by postie
upgraded my software to R1KG001 today and have lost half the themes and ringtones and some other stuff that was on it as standard before from when I got the phone new,am gutted.Plus its quiter,cant remember now what the software was before but sorry now I upgrade.anything i can do or am i stuffed?
Posted by postie
Seen the article on page 1,I am on o2 so if I change to the o2 software on page 1 will I got my stuff back?Got the k800i the end of last November (2006) and not touched the software ( never knew how before today ).
O2 UK (CDA102511/41) - R1JG001
[ This Message was edited by: postie on 2007-09-06 03:19 ]
Posted by chestertan20
hey guys my firmware right now is R1JG001 im just wondering if i can update my acoustics to w880i? how can i do this im just starting to mod my k800i anyone can help me or give me a step by step procedure? i already downloaded the XS++ and the W880i.rar
Posted by MEGAGHOST
hello
after i using master reset (reset all) the keyboard menu button change to oprator
iam useing seus to fix it but nothing
please help
Posted by MEGAGHOST
again ineed your help please
after i using master reset (reset all) the keyboard menu button change to oprator
iam useing seus to fix it but nothing
please help
Posted by aremaboy
| Quote: |
|
I don't get what you mean..
Posted by MEGAGHOST
Nice
In the keyboard there is menu button ok!
When i press it .its go automaticly to web
How i can reset it
Posted by aremaboy
You mean the internet/browser button? That's how it works. If you want to change it with your own link, that's easy. Create a bookmark and set it as a new homepage.
Posted by MEGAGHOST
when i press (menu button) its not go to favoret &app &bookmark its go only to web it is changed
it is changed after i use reset all the phone delete all file software font layout camera and short cut the menu button
pleeeeeeeeeeeeeeeeeeeeeeeeeeease help
Posted by aremaboy
Well, the only way out is reflashing the phone firmware totally. You can use www.wotanserver.com or with Phone XS++ if you want it to do it for free with your own risk. Good luck.
Posted by hanugro
On 2007-09-12 19:51:55, MEGAGHOST wrote:
when i press (menu button) its not go to favoret &app &bookmark its go only to web it is changed
it is changed after i use reset all the phone delete all file software font layout camera and short cut the menu button
pleeeeeeeeeeeeeeeeeeeeeeeeeeease help
Hm, have you tried another reset? It is strange as if the menu.ml is corrupted. You may try to put original menu.ml (and layout.xml) using phone XS++.
Posted by DeLorean
Hi
I have a K800i from O2. Since updating to firmware version R1KG001 (the latest) I can no longer access AMR (voice recordings) on the phone. I've tried Bluetooth and using the cable, but the files are not listed.
Also if you have a shortcut for recording conversations whilst on the phone (e.g. up on the joystick) it no longer works.
You now have to go through the left button menu to activate the record feature.
Recently my fiancé upgraded to a K810i with O2. This has the same problems as my K800i.
It’s a very buggy firmware from SE.
It’s been a while since the last firmware update, has SE finished with the K800i?
Is there an easy way I can re-flash my firmware back to a previous version?
Thanks
Posted by hanugro
On 2007-09-13 09:31:33, DeLorean wrote:
Is there an easy way I can re-flash my firmware back to a previous version?
Thanks
Have no idea if you are on O2 firmware but if you can find the firmware you can flash it using XS++1.68 or SEToolLite 1.08. Try topsony whether they have your firmware. But you can only use CID52 firmware and not earlier.
Posted by MEGAGHOST
i already flash k800 to K810_R6BC002 but nothing i need orginal file activity menu and new events i cant find it in the setting
Posted by PE4ce
It’s been a long time since the last firmware update..!why SE doesn't release new frimware...?
because the current one is...not good and have many issues
Posted by opexblue
How long would it takes to update K800i from SEUS ?
(My firmware R1GB001 CID51)
Posted by aremaboy
Hi, it depends on your internet speed. Dial up can take at least 1.5 hour...broadband...less than 45 minutes.
Posted by opexblue
Just finish update via SEUS. now it's R1KG001 CID52
Posted by blunden
On 2007-08-26 16:08:00, aremaboy wrote:
| Quote: |
|
Sure. Just press 2 and 5 simultaneously on Wotan.