Posted by MrZippy
On 2007-07-13 12:53:36, Boyd wrote:
Hi,
My K800i felt this morning (20cm height, woow-_-). If I try to put it on, the red LED by the IR Port is flickering.
I don't know what to do... I'm on a holiday to Salou, so I can't contact sony ericsson Holland for this.
It's dead, needs a service centre flash to fix...
This happened to my K610 somehow SEUS corrupted the phone, never even got as far as the flash... Service centre fixed, and have even updated the EROM... Have used SEUS since with no problems.
Posted by sim0n_
On 2007-07-13 18:27:53, Boyd wrote:
The battery is full... It was full this morning. I recharged it for 6 hours now... no difference..
[ This Message was edited by: Boyd on 2007-07-13 17:31 ]
this hapened to my k800 also. you'll have take it to SE center. they'll upload new fw.
it hapened, when i took the batery out, without turning the phone off first. so that gave me a leson.
Posted by retman8
Hi Boyd,
I've got the same problem... I was browsing my videos and my K800i just went off. I tried it with another battery, charged it for a whole night, moved the battery slightly in the phone, etc etc.
But the only thing I see is alive, is the red I/R-light.
Can you please let me know if the SE-service center can fix this?
I will do the same
Cheers!
Posted by naveensiva
check out this thread..dont worry about it ...
i too had the problem.. but the solutiion is only seconds away..
so keep ur head cool
small erom update is enogh
http://www.esato.com/board/viewtopic.php?topic=136077
Posted by altemyr
I have found another bug in R1JG001: If you set silent mode on the handsfree profile, you get the ringer signal in the earphones instead, and it works while playing the music player, or if the phone is unused (Don't know why you should walk around with the earphones in your ears then though
). However, in radio mode, the radio is sillenced, but the ringer signal is not heard. Can anyone with a newer firmware version inform me about wether this bug still remains?
Posted by hackansom
after I shut down the k800i, I figure I can't have it back on. The screen is white, and it hangs, the only way to turn off is to remove the battery. Can any1 pls help me? thanks so much.
Posted by aremaboy
Reflash the phone here www.wotanserver.com . It's not free, but it's the fastest, easiest, and most reliable solution for you. Good luck.
Posted by bronxdude
hi guys! can someone help me with this?
i got a 2gb sandisk m2. so i transferred everything from mg 512mb m2 to the new one.
problem is, my games and applications are not working. when i try to open the applications, and games folder, it says OPERATION FAILED.
what do i need to do? thanks guys
Posted by aremaboy
You need to reinstall the games and applications to the new M2.
Posted by bronxdude
On 2007-07-21 08:17:00, aremaboy wrote:
You need to reinstall the games and applications to the new M2.
how do i do this?
Posted by Lambalisa
How likely is it that SE will release a new firmware? Considering the phone is kinda "old" now.
Posted by GeForce
On 2007-07-24 14:24:17, Lambalisa wrote:
How likely is it that SE will release a new firmware?
Not very tbh.
*j
Posted by joevik
Hi, i am having a problem with my K800i, everytime i make a call or receive a call, the name to which the number is attached won't appear, only the number appears, and all the names are still in the contacts menu... do you think its the firmware ? Coz i tried resetting it and putting the default memory as phone.]
thanks
Posted by sapporobaby
On 2007-07-25 20:47:16, joevik wrote:
Hi, i am having a problem with my K800i, everytime i make a call or receive a call, the name to which the number is attached won't appear, only the number appears, and all the names are still in the contacts menu... do you think its the firmware ? Coz i tried resetting it and putting the default memory as phone.]
thanks
Make sure you do not have multiple numbers for the same name. The phone gets confused as to which name to show. Make sure your contacts and numbers are correct.
Posted by joevik
On 2007-07-25 22:17:53, sapporobaby wrote:
On 2007-07-25 20:47:16, joevik wrote:
Hi, i am having a problem with my K800i, everytime i make a call or receive a call, the name to which the number is attached won't appear, only the number appears, and all the names are still in the contacts menu... do you think its the firmware ? Coz i tried resetting it and putting the default memory as phone.]
thanks
Make sure you do not have multiple numbers for the same name. The phone gets confused as to which name to show. Make sure your contacts and numbers are correct.
Hi thanks for replying. There is only one copy of the numbers in the mobile, i tried updating it but still its the same... i get no names attached to the number i am dialing or receiving a call from even though the number and name is saved in the phone memory.
Posted by fxss
On 2007-07-20 09:30:29, hackansom wrote:
after I shut down the k800i, I figure I can't have it back on. The screen is white, and it hangs, the only way to turn off is to remove the battery. Can any1 pls help me? thanks so much.
Hi,
my K800 did that 2 times after updated for R1KG001! One time by SEUS, the second by Wotan!!
Anyone know why?
Is a bug from R1KG001?
Now i gonna try R1KC001 from Wotan!!
But everyone with the last K800 firm, try 2 turn off your phone for several hours then try 2 turn it on, if it get stuck in the bootloader with a white screen, that's probably a bug!!
Regards,
NunoFX
[ This Message was edited by: fxss on 2007-07-27 11:27 ]
Posted by hanugro
It may happen if you got older EROM. Check whether your EROM is still at R3A011. It is an old problem!
On 2007-07-27 12:25:35, fxss wrote:
On 2007-07-20 09:30:29, hackansom wrote:
after I shut down the k800i, I figure I can't have it back on. The screen is white, and it hangs, the only way to turn off is to remove the battery. Can any1 pls help me? thanks so much.
Hi,
my K800 did that 2 times after updated for R1KG001! One time by SEUS, the second by Wotan!!
Anyone know why?
Is a bug from R1KG001?
Now i gonna try R1KC001 from Wotan!!
But everyone with the last K800 firm, try 2 turn off your phone for several hours then try 2 turn it on, if it get stuck in the bootloader with a white screen, that's probably a bug!!
Regards,
NunoFX
[ This Message was edited by: fxss on 2007-07-27 11:27 ]
Posted by fxss
I think my EROM is R3A016 because Wotan update it!
Anyway how do i update the EROM?
But this problem didn't happen with the previous firm!!
On 2007-07-27 15:53:58, hanugro wrote:
It may happen if you got older EROM. Check whether your EROM is still at R3A011. It is an old problem!
On 2007-07-27 12:25:35, fxss wrote:
On 2007-07-20 09:30:29, hackansom wrote:
after I shut down the k800i, I figure I can't have it back on. The screen is white, and it hangs, the only way to turn off is to remove the battery. Can any1 pls help me? thanks so much.
Hi,
my K800 did that 2 times after updated for R1KG001! One time by SEUS, the second by Wotan!!
Anyone know why?
Is a bug from R1KG001?
Now i gonna try R1KC001 from Wotan!!
But everyone with the last K800 firm, try 2 turn off your phone for several hours then try 2 turn it on, if it get stuck in the bootloader with a white screen, that's probably a bug!!
Regards,
NunoFX
[ This Message was edited by: fxss on 2007-07-27 11:27 ]
Posted by hanugro
On 2007-07-27 16:11:24, fxss wrote:
I think my EROM is R3A016 because Wotan update it!
Anyway how do i update the EROM?
But this problem didn't happen with the previous firm!!
Hm, you did use wotan with 2&5 keys instead of c keys otherwise wotan won't update your EROM? You can check your EROM ver on your phone >*<*<<* and see service info - software info second from button. Or you can check it with the help of wotan client.
This thing can come out of the blue with older EROM. You can have it work perfectly for 6 months then it just happen.
If your phone still can't turn on you need to do EROM update using wotan again (2&5 keys). Try to search this forum on reviving dead K800. There are several thread about that.
[ This Message was edited by: hanugro on 2007-07-28 02:30 ]
Posted by aremaboy
Just for your interest, latest batch of K800i comes with EROM R3A022.
Posted by joevik
Hi, i am having a big problem, my phone shows a white screen as i turn it on, i am trying to update it via sony ericsson's update service, but it keeps on blocking at 95% and says that there was an error. i tried wotan server, it says that my phone is a K700, when my phone is a Vodafone K800... and it says that phone is not recognised.... can anyone please help ?
Posted by kotsianis7
I saw the previous week in Kulan-Kendi site that maybe we will be able to update to R3A022 EROM version..The guys there,are trying this update to see if generates any problems..And when they will be ready,then we,also,will be ready to update our phones!
Posted by joevik
When i try to update the erom it fails
DB2020 detected
LOADER : Ok
FC ID : 89 7E
connecting to server
connection OK
sending login
EROM : Starting upgrade
EROM : Done
Error :
SEMCSEC status 3
==FAILED==
Duration : 00:02
Posted by hanugro
On 2007-07-28 12:14:16, kotsianis7 wrote:
I saw the previous week in Kulan-Kendi site that maybe we will be able to update to R3A022 EROM version..The guys there,are trying this update to see if generates any problems..And when they will be ready,then we,also,will be ready to update our phones!
Yeah I ask him weeks ago but he said still need to know whether it is stable. Really looking forward to it.
Posted by kotsianis7
yeah...me too,i'm really,really really looking forward to it!!
Posted by joevik
Hi, i am still stuck with the white screen, i found a program on a website called XS++, i tried using it and that's what i get as log..... can anyone help asap !
Turn off phone
21:57:09| Hold C Button on phone and connect phone.
21:57:09| You have 30 seconds.
21:57:09|
21:57:13| PORT STATUS: ACTIVE
21:57:13| Baseband ID: 9900
21:57:13| Hardware Platform: db2020
21:57:13| Protocol Version: 3.1
21:57:13| AutoReturnCollectingWarning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
21:57:13| ...using IMEI name
21:57:13| Return
21:57:13| PHONE INFO
21:57:13| DBID: db2020
21:57:13| OTP CID: 49
21:57:13| EROM CID: 52
21:57:13| EROM color: Red
21:57:13| IMEI: 35xxxxxxxxxxxx
21:57:13| Phone: K800
21:57:13| Operator: VFE_LIVE_2
21:57:13| CDA: CDA102511/15 R17A
21:57:13| Firmware: R1ED001
21:57:13| EROM: R3A016
Posted by aremaboy
I just wonder how could it have K700 GDFS. K800 and K700 are totally two different phone platforms. Has it been repaired, flashed or modified before?
Posted by joevik
Yes, when i first got the phone i had to update the rom to be able to use it, and like about two weeks i had to update it via the update service and thats when i noticed it has the K700i thing, because as i went to the secret menu, the phone model there was K700i....but the real model is K800i !!
Posted by hanugro
On 2007-07-29 06:39:03, joevik wrote:
Yes, when i first got the phone i had to update the rom to be able to use it, and like about two weeks i had to update it via the update service and thats when i noticed it has the K700i thing, because as i went to the secret menu, the phone model there was K700i....but the real model is K800i !!
Well, I think you need service cable to be able to fix it. Bring it back to the update service where you fixed t before. It is obvious that they didn't fix it properly.
Posted by joevik
I meant the internet update service ! Isn't it fixable via internet ?
Posted by max_wedge
I just upgraded to R1KG001 from R1GB002.
R1KG001 JAVA engine has the option to set "ask once" or "never ask" permssions for read/write user data. This means the ability to run file system accessing java apps without the repetitive file system access permission prompt
I've asked mwarner to include this in the first post of the thread.
Posted by hanugro
On 2007-07-30 05:54:57, joevik wrote:
I meant the internet update service ! Isn't it fixable via internet ?
Hm, you update through SEUS and it screw by giving K700 GDFS? I have no idea sorry! I don't even think it is possible to change GDFS with SEUS/Wotan/Kulan. etc. What exactly that you do when you use that internet update service? Giving detail step may help to see why it went wrong.
Have you tried to use holding 2&5 with wotan to update EROM ver?
Posted by Neo-Tech
I just updated using my XP Machine to R1KG001 and it went good all the way along and then when I turn my phone on i get a whitesreen and then It goes dark and then I get a message saying please wait and thats it. Please help I need my phone for alarm.
FIXED: Plugged in charger and tunred it on and tnaaaaa. I t worked. My battery was about to die when i was jupdating and i didnt realeise
[ This Message was edited by: machanic on 2007-07-30 09:21 ]
Posted by Neo-Tech
What are the bew features in R1KG001. I cant be asked to got through the whole thread
Posted by joevik
On 2007-07-30 08:19:46, hanugro wrote:
On 2007-07-30 05:54:57, joevik wrote:
I meant the internet update service ! Isn't it fixable via internet ?
Hm, you update through SEUS and it screw by giving K700 GDFS? I have no idea sorry! I don't even think it is possible to change GDFS with SEUS/Wotan/Kulan. etc. What exactly that you do when you use that internet update service? Giving detail step may help to see why it went wrong.
Have you tried to use holding 2&5 with wotan to update EROM ver?
Yes i tried and i keep on getting this error : SEMCSEC status 3
Posted by max_wedge
On 2007-07-30 10:26:31, machanic wrote:
What are the bew features in R1KG001. I cant be asked to got through the whole thread
look on the front page for other changes.
Posted by hanugro
On 2007-07-30 13:59:43, joevik wrote:
On 2007-07-30 08:19:46, hanugro wrote:
On 2007-07-30 05:54:57, joevik wrote:
I meant the internet update service ! Isn't it fixable via internet ?
Have you tried to use holding 2&5 with wotan to update EROM ver?
Yes i tried and i keep on getting this error : SEMCSEC status 3
There are seems few ppl getting that error message when running wotan. MAybe that show a problem with GDFS? I am not sure here sorry. You need to ask wotan. Try issue a ticket and detail information on their customer service!
Posted by Neo-Tech
I get the same problem in Wotan. My EROM is R3A011 but I want to update to the latest current version which is R3A022
Posted by joevik
On 2007-07-30 15:54:54, hanugro wrote:
On 2007-07-30 13:59:43, joevik wrote:
On 2007-07-30 08:19:46, hanugro wrote:
On 2007-07-30 05:54:57, joevik wrote:
I meant the internet update service ! Isn't it fixable via internet ?
Have you tried to use holding 2&5 with wotan to update EROM ver?
Yes i tried and i keep on getting this error : SEMCSEC status 3
There are seems few ppl getting that error message when running wotan. MAybe that show a problem with GDFS? I am not sure here sorry. You need to ask wotan. Try issue a ticket and detail information on their customer service!
Thanks for the tip, will contact them and let you know what is the problem
Posted by CoolDim
Hi
I want to update my k800i to the latest version.
My phone software version says
CXC1250210
R1EG001
060915
Which is my current software version ID and how do I find out which version update to choose and compatible? Or any new version compatible with any k800i?
Anyone please?
Posted by aremaboy
CoolDim:
Run SEUS. Look at the 1st post by mwarner. It's all there.
Posted by fxss
On 2007-08-01 09:00:00, aremaboy wrote:
CoolDim:
Run SEUS. Look at the 1st post by mwarner. It's all there.
Hi, but i updated mine for the last version by SEUS, but he didn't upgrade my EROM to 22, so my phone got stuck at boot with a white screen!!
How do i upgrade to the last sw and erom with SEUS without my phone get stuck after upgrade??
Posted by aremaboy
SEUS won't be able to upgrade your EROM at all. Wotanserver can, but you must pay. For a phone with white screen after SEUS, well, there is only one solution: reflash the firmware. For free, you can visit SE Service Centre if it is still under warranty. For quick job, buy a log at WotanServer. Good luck.
Posted by hanugro
On 2007-07-30 18:27:15, machanic wrote:
I get the same problem in Wotan. My EROM is R3A011 but I want to update to the latest current version which is R3A022
Nobody seems willing to offer R3A022 yet!
Posted by skylineR35
hey guys, i got a problem on my k800.
yesterday i did update the firmware since R1KG via seus have the java restriction removed. but there;s another problem:
that is the camera date and time stamp is becoming red in colour, just like old Kseries. but then when i take picture with the stamp enabled it has1minute delay to let me take another picture... well this is quite annoying because i have to turn off the timestamp in order to get my camera working as usual..
any idea??
Posted by aremaboy
That's 'normal' in R1KG. Just endure this delay..or inactivate the date-time stamp.
Posted by wavedilson
On 2007-07-28 13:11:49, joevik wrote:
When i try to update the erom it fails
DB2020 detected
LOADER : Ok
FC ID : 89 7E
connecting to server
connection OK
sending login
EROM : Starting upgrade
EROM : Done
Error :
SEMCSEC status 3
==FAILED==
Duration : 00:02
i have the same problem, does anyone know how to fix this? its a pain in my ass holes. thanks
Posted by fxss
I have da SEMSEC error too!!
Anyone can help?
Posted by jkbcheng
Why R1KC001 is still not available on SESU in HONG KONG?
Posted by fxss
On 2007-08-04 01:41:22, fxss wrote:
I have da SEMSEC error too!!
Anyone can help?
Anyone can help??