Posted by leerichards
No update on SEUS for me and my de-branded 02 handset. Still on R1GB001
Lee
Posted by muratti54
I bought my K800i 3 months ago(has nobranding and it is free for all Simcards) and between I did 2 updates now I still have the R1GB001 ,I live in Austria I just checked in SEUS R1JG001 not available,when will be possible to make the latest update per SEUS who lives in Germany,Austria and has a free K800i(nobranding,noSimlock)thank you all for the answers for question
Posted by hanugro
On 2007-03-16 09:42:32, NoSubstitute wrote:
On a totally different note I accidentally killed my phone this morning!
Halfway through the update my laptop died ... imagine my screams.
Resarted and tried agan and it died on me once more.
WSOD!
Grabbed SEUS installation at work and ran update to "same version" and it runs fine now. But on R1GB001 as stated before.
[ This Message was edited by: NoSubstitute on 2007-03-16 08:43 ]
Man, how can you run out of power when using laptop, LOL. Before this I think updating via laptop is the safest method other than using online UPS system. You should never update any firmware without the laptop connected to the power outlet and batt fully charge.
Posted by hanugro
On 2007-03-16 11:04:38, steviedb wrote:
I've seen that a lot of people in the forum have said that SEUS says there are no updates available even when there are - some people are able to update when others can't. Does anyone know why this happens?
Well not all CDA string (customization) has latest R1JG. For example provider in your country may not approved R1JG yet and as such SE will not provide it through SEUS.
I don't think wotan should made your phone can't be updated using SEUS unless you are changing it to CDA string that is not exist.
Posted by aremaboy
@hanugro:
Does your R1JG001 have Bahasa Indonesia T9 feature after SEUS update?
I flashed mine via Wotan to R1JC002 and I got this additional feature.
Posted by derugatory
So far have no complaints about the R1JG...it did resolve my joystick issues.
Posted by NoSubstitute
On 2007-03-16 12:32:59, hanugro wrote:
Man, how can you run out of power when using laptop, LOL. Before this I think updating via laptop is the safest method other than using online UPS system. You should never update any firmware without the laptop connected to the power outlet and batt fully charge.
It didn't run out of power, mate.
It shut down because it felt like it.
I believe it was overheated (SEUS runs at 100% CPU for a long time).
That particular laptop has been in the floor at least twice, so it's not 100% reliable
Posted by typhoon9
I have just updated to R1JG001 on an o2 branded phone with SEUS in leicester uk . Hope this helps
Posted by hanugro
On 2007-03-16 13:01:42, NoSubstitute wrote:
It didn't run out of power, mate.
It shut down because it felt like it.
I believe it was overheated (SEUS runs at 100% CPU for a long time).
That particular laptop has been in the floor at least twice, so it's not 100% reliable
My goodness. Has anone confirm SEUS take that heavy resource on CPU? You'd better NOT doing anything critical with that laptop anymore.
Posted by hanugro
On 2007-03-16 12:55:00, aremaboy wrote:
@hanugro:
Does your R1JG001 have Bahasa Indonesia T9 feature after SEUS update?
I flashed mine via Wotan to R1JC002 and I got this additional feature.
Have not tried it yet! Have you not upgraded via SEUS to R1JG?
Posted by NoSubstitute
On 2007-03-16 15:13:03, hanugro wrote:
My goodness. Has anone confirm SEUS take that heavy resource on CPU? You'd better NOT doing anything critical with that laptop anymore.
Yeah, I know.
But it's my wife's.
She never does anything critical even close to that computer ..
nah, that was unfair.
I have told her about the issue, but it was she who threw the darn thing on the floor, so she is aware that it is her own fault.
Posted by activeforce
Hello,
I have updated my k800i using FOTA (SEUS) via GPRS
and i now have firmware: R1JG001
I was expecting the firmware R1JC002 but i guess SE skipped it?
I checked on wotanserver and it seems i have the lastest lastest firmware hehehe which is so cool...
And it was my first try using FOTA and iam 100% ill use it again over SEUS since its easier!
K800i (Netherlands/Aruba)
Cheers
[ This Message was edited by: activeforce on 2007-03-16 16:55 ]
Posted by aremaboy
| Quote: |
|
Don't be wrong, I'm among one of the first users with R1JG001 at the 1st day it was released on SEUS. What I mean is eversince I flashed mine to R1JC via Wotan the other day, I have had this Indonesian T9 feature. When I bought my K800i 7 months ago, I didn't have this feature. Just wonder if SEUS also adds it to APAC users.
Posted by sapporobaby
On 2007-03-16 15:13:03, hanugro wrote:
On 2007-03-16 13:01:42, NoSubstitute wrote:
It didn't run out of power, mate.
It shut down because it felt like it.
I believe it was overheated (SEUS runs at 100% CPU for a long time).
That particular laptop has been in the floor at least twice, so it's not 100% reliable
My goodness. Has anone confirm SEUS take that heavy resource on CPU? You'd better NOT doing anything critical with that laptop anymore.
Or get a better laptop. I have an Intel-Mac and my proc barely breaks a sweat. I do have 3 gigs of ram though.
Posted by Daniel3655
just updated my k800i and got R1JG001 by using SEUS, everything was going fine.
Posted by Daniel3655
hm...seems like i found a problem here. is that when i unlock the phone, the brightness still remains as it is in the sleep mode. anyone have this problem?
Posted by glorfingal
@daniel - nope mine comes back p to full brightness straight away.
Posted by crazyguju3
Can someone please give me some advise on this:
I just bought the O2 k800 unlocked and want to unbrand it so that I can use it in the U.S. and get rid of the O2 stuff. Can I then use the SEUS to get the generic update or will it still look for the O2 update and revert the phone back to 02? Only reason i want to unbrand it is to make sure I get the latest generic updates.
thanks
Posted by andre_cool
On 2007-03-16 12:57:31, derugatory wrote:
So far have no complaints about the R1JG...it did resolve my joystick issues.
yes me too...i used to have issues with my joy...now its ok
Posted by Daniel3655
On 2007-03-16 21:08:29, Daniel3655 wrote:
hm...seems like i found a problem here. is that when i unlock the phone, the brightness still remains as it is in the sleep mode. anyone have this problem?
damm...updated again but problem still remains. HELP!
Posted by criz
just upgraded my phone yesterday via seus R1JG001.
just want to ask if my phone is hongkong version.can i change my main Firmware and firmware to china and my customization to apac?thnx
Posted by apmannen
I also updated my phone today and got the new R1JG001 firmware. Anyone knows anything about it, updates, new functions etc.?
I live in Europe, Sweden btw.
Posted by muratti54
I bought my K800i 3 months ago(has nobranding and it is free for all Simcards) and between I did 2 updates now I still have the R1GB001 ,I live in Austria I just checked in SEUS R1JG001 not available,when will be possible to make the latest update per SEUS who lives in Germany,Austria and has a free K800i(nobranding,noSimlock)thank you all for the answers for question
Posted by DannoUK
Just to add im having exactly the same backlight problem with my k800i on Three network in the UK as others have mentioned - since I did the latest firmware update. The backlight stays on for a short time and then doesnt come back on again. If I change the brightness setting the light comes back and then goes agin as before. Any thoughts?
Posted by Daniel3655
On 2007-03-17 17:39:27, DannoUK wrote:
Just to add im having exactly the same backlight problem with my k800i on Three network in the UK as others have mentioned - since I did the latest firmware update. The backlight stays on for a short time and then doesnt come back on again. If I change the brightness setting the light comes back and then goes agin as before. Any thoughts?
i got the exact problem as you. the below is the software info.
R1JG001
EROM: R3A011
LCD: 200604051
Camera: 2.4
Videocall camera: 2.3
Content: PA24
Java: 7.3
Text: BT
i tried to master reset the hp but it's still the same. when i did the service tests on LED/illumination, the backlight just goes off and never comes back. when someone called me, the backlight oso doesn't works. how to get this problem solved?
Posted by DannoUK
The only work around I have found which seems to half solve the problem is to set the brightness to 80% and that appears to work although not toally as the lgith still stays off when it powers down during writing a text for example.
I have discovered something odd however. When the backlight is inactive and a text comes through it will take the phone exactly 10 seconds to light up after the text has been received. Also, if i press a key and dont press another, it will take 10 secs for the backlight to come on...
Weird?
Posted by aremaboy
My R1JG001 CHINA WI with APAC file system doesn't have any problematic issue with backlight. All works normally. It may be due to 3 branded firmware which has the problem. Seeing the firmware info posted earlier, you should have gotten camera ver.2.5, EROM R3A016 and PA29 content version, if it is R1JG001 already.
Posted by Daniel3655
On 2007-03-17 21:46:07, DannoUK wrote:
I have discovered something odd however. When the backlight is inactive and a text comes through it will take the phone exactly 10 seconds to light up after the text has been received. Also, if i press a key and dont press another, it will take 10 secs for the backlight to come on...
Weird?
same like mine, i oso having the same problem, it takes 10 sec to light up. After the light goes off, it wont be lighted up again if i press any key.
Posted by aremaboy
A full reflash, perhaps?
Posted by sguilliard
On 2007-03-17 23:19:00, aremaboy wrote:
My R1JG001 CHINA WI with APAC file system doesn't have any problematic issue with backlight. All works normally. It may be due to 3 branded firmware which has the problem. Seeing the firmware info posted earlier, you should have gotten camera ver.2.5, EROM R3A016 and PA29 content version, if it is R1JG001 already.
I updated my K800i using the OTA service and don't have the backlight issue:
R1JG001
EROM: R3A011
LCD SW Version: 200610121
Camera SW Version: 2.5
Video Call Camera: 2.3
Customization: CDA102511/2 R1A
cxc1250490 R!JG001
1E0W
EUROPE_2
Content version: PA29
Java SW Version: JP-7.3
Text revision: BT
Update Service SW
UA version:
CRH1069179 R3B021
2006-10-12 08:47
Posted by aremaboy
| Quote: |
|
Isn't the Update Agent supposed to be
CRH1069179 R3B021
2006-12-18 15:59 ?
Posted by Daniel3655
On 2007-03-18 01:41:00, aremaboy wrote:
A full reflash, perhaps?
how to do a full refresh? i've tried to update but it's still the same. any chances to downgrade to previous version?
Posted by chadiwrx
On 2007-03-18 03:25:00, aremaboy wrote:
Isn't the Update Agent supposed to be
CRH1069179 R3B021
2006-12-18 15:59 ?
No mine is
Update Service SW
UA version:
CRH1069179 R3B021
2006-10-12 08:47
Posted by Daniel3655
just found out on my R1JG001 the customization is
CDA102511/85 R7A
cxc1250490 R1CB001
y is tat still R1CB001?
Posted by aremaboy
| Quote: |
|
That's the root of the problem. SEUS only updates your phone partially, therefore you have a combo R1BC and R1JG. The only way is buying a 7 EURO credit from www.wotanserver.com and fully reflash the phone to R1JG001. However, just wonder why you have a combination firmware.
Posted by aremaboy
| Quote: |
|
Just checked again, my Update Agent is truly of different date. It is 2006-12-18 15:59
How did you get R1JG? FOTA, SEUS or Wotan?
Posted by hanugro
On 2007-03-18 14:40:00, aremaboy wrote:
| Quote: |
|
Just checked again, my Update Agent is truly of different date. It is 2006-12-18 15:59
How did you get R1JG? FOTA, SEUS or Wotan?
Mine is same as aremaboy. Using SEUS! Remember that I said it is getting difficult to enter Software menu using R1GB? Now with R1JG is easy again.
Posted by Xephex
Mine is 2006-10-12 08:47 and i just updated thorugh the phones update service. And my phone is not branded.
Posted by presto
What is the latest firmware for T-Mobile? and is it wise to upgrade to it because I remember quite a few people advising not to upgrade to the new firmware...
Posted by aremaboy
So FOTA doesn't update Update Service Agent, but SEUS does. That's weird as Update Service Agent is meant primarily to run FOTA?
Posted by blakthorn
I have a k790a. from usa and I am currently running R1GB001.
Is this the latest software?
Everytime I try to use SEUS to download it says I have the latest software..
Even if I click continue anyway it finishes 100% but I still have the same software..
I picked United States when SEUS started, should I pick another country?
Posted by maldus
se has not come out with the new f/w for the k790i in india atleast on seus!!
its been a week since it was released for the k800i. its strange coz they normally come out the same time.
my friend updated his k800i. his is the french version. he told me that the top two buttons next to the earpiece have been disabled!!
these buttons were used to scroll up and down in the file manager.
has anybody noticed that?
Posted by hanugro
On 2007-03-19 04:08:40, maldus wrote:
my friend updated his k800i. his is the french version. he told me that the top two buttons next to the earpiece have been disabled!!
these buttons were used to scroll up and down in the file manager.
has anybody noticed that?
Never knew that it function as scroll button (using joystick is more natural). I thought it is used for camera control? I don't think I will miss it.
Posted by aremaboy
The two keys at the top are normal here. No problem to be used to view Camera shots or scroll down in File Manager.
Posted by ratei
I have the same problem. Since I've upgraded to R1JG001, upper left hand corner button doesn't work on certain areas. Though the other button on the right works normally. I can't scroll into File Manager and Camera Album in Full View accessed from the top two buttons.
Posted by aremaboy
| Quote: |
|
Here are my findings:
-in standby, pressing the button near the camera brings you to thumbnail foto album. The two buttons both WORK allright to be used to move up and down only.
-in standby, pressing the button far from camera brings you to landscape photo. But, you CAN'T view the next photo by pressing it. Instead, you must use the button near the camera. It enables you to move from picture to picture.
-in Camera Album folder, the two buttons both work to scroll only up and down with thumbnail, e.g. 3x3. BUT, if each photo is in Landscape, both buttons DO NOT work.
-in File Manager, ONLY the button nearer to Video Call camera works to highlight up and down, inside File Manager main folders as well as subfolders and sub-subfolders. The button far from camera DOESN'T work.
-Both buttons DO NOT work to scroll the contents of Game and Applications folders inside File Manager.
So, is that what you mean by 'not working in certain areas'? I just don't remember that it worked before. Or did they?
However, it's not a major problem. We have our joystick to scroll up and down, right?
[ This Message was edited by: aremaboy on 2007-03-19 10:06 ]
Posted by maldus
yeah its only the left button that doesn work in the file manager for scrolling
also in standby when u press it once your camera pictures open. earlier you could press that same button and scroll those camera pictures. but that doesnt happen now.
i agree its not too big a deal but still its handy. but when that button has been provided it should atleast function right. then it depends on the user whether he utilizes it or no!!
Posted by nats168
On 2007-03-19 06:23:08, ratei wrote:
I have the same problem. Since I've upgraded to R1JG001, upper left hand corner button doesn't work on certain areas. Though the other button on the right works normally. I can't scroll into File Manager and Camera Album in Full View accessed from the top two buttons.
Yup. Same here. APAC CHINA W1. Also have the screen dimming out in the middle of texting. Although when I press any key, the screen lights up agian instantly and not after 10 secs like the others.
Should've stuck with R1G. Sheesh...
Posted by aremaboy
| Quote: |
|
You must have been idle for some time while texting and it went to 'save energy status'.
Posted by nats168
You must have been idle for some time while texting and it went to 'save energy status'.
2 seconds is hardly much idle time...
