Posted by absinthebri
@ revve
D2P works perfectly on my W800i but not my W810i. My W800i takes albums as they are ripped and copies the album correctly into the Walkman player. My W810i does not. As D2P works on my W800i but not my W810i I assume it's a bug. It didn't work on my W800i either until it was flashed to the latest firmware.
Posted by tef89
Just got my replacement w810 with R4CE012 (o2 UK) firmware - the flashing light bug is gone on this unit but as with the other w810 I had (same fw) the handsfree loudspeaker is terrible during calls - both at my end and the receivers end, it crackles the spkr as tho its too loud but it stays distorted al the way down to low vol (4xbars).
Anyone else had this on their handset ?
Btw it's fine during music playback.
[ This Message was edited by: tef89 on 2006-05-18 13:14 ]
[ This Message was edited by: tef89 on 2006-05-18 13:15 ]
Posted by kurupted786
Has anyone been able to get a firmware update through seus from r4cf002? i keep trying to update but it says there are no updates available :-S
Posted by revve
@absinthebri
Are you sure you have the latest version of D2P?
The one that comes with the W810i is newer than the W800's.
Perhaps if you try to uninstall the old D2P, and install the new again, it will work?
Posted by shahveer
Bug?
Hi all,
Just got myself a W810. Lovely phone. I'm in Dubai, UAE (MENA Region). The sw is R4CE012.
Dunno what CXC1250316 is...?
Anyhow, I previously had a T68i and then a T630.
Here theres only one tel. operator, so we don't have to dial 'area codes' if calling another mobile.
Before, if i dialed 6543210 (for example), it would show the contacts name when I press dial, even though I saved the number with the area code - ie. +97150 6543210.
This doesn't work now. So when receiving a call from a saved contact, the name doesn't appear.
Hope you understand what I mean. Anyone have any idea what this is all about?
Cheers.
Shahveer
P.S. All phones here are unbranded and unlocked, and I think cheaper than abroad (I bought mine for about US $ 463, with Bluetooth Headset - HBH-610a), so if anyone interested, lemme know...
Posted by absinthebri
| Quote: |
|
Yes. D2P isn't the issue; it's the phone. Having one phone that handles mp3s correctly and one that doesn't suggests it's a firmware bug.
Like I said, I had the same issue with my W800i until I flashed it.
Posted by shahveer
My baby just had a heart attack!
Was playing with the voice dialling...thru my HBH-610a headset.
gave a voice command to dial (first time, just trying it out), it started dialing, so cut the line. The phone went off, white screen flashed twice or thrice, so i switched it off.
Couldn't get it back on until i removed the battery.
Just thought id let you all know...
Posted by P1N3R
I have noticed hissing when listening to music via earphones, and you can, if you listen hard and put it on low volume, hear it via the speaker. I admittedly wouldnt have noticed if it wasn't pointed out to me. But its a bug.... i do hope SE decide to change their mind on not fixing it,
P1
Posted by tef89
Can't say I've noticed any hissing but I do use my own more expensive headphones (not the bundled ones).
Since I got my new replacement handset (this morning) it's switched itself off twice - anyone else had that problem ?
EDIT: 3x times now - seems to be when I send an MMS - I've done a master reset and changed the battery to see if that makes any difference.
EDIT2: Seems to have been a problem with the battery (even tho its been fine with my k750 for 8 months) changed it and all seems ok for now.
[ This Message was edited by: tef89 on 2006-05-18 23:20 ]
[ This Message was edited by: tef89 on 2006-05-19 00:24 ]
[ This Message was edited by: tef89 on 2006-05-19 10:22 ]
Posted by CheekyMonkey
Has anyone noticed when you receive an SMS delivery report that the time it says it was delivered can sometimes be 2 hours and 2 minutes behind.Sometimes not all the time.It does on my T-Mobile one anyway.
Posted by MattyGB
| Quote: |
|
I have R4CF002 on Orange and I do not have the LED flashing bug or any of the other bugs mentioned.
Posted by barrielee
| Quote: |
|
RADIO DESCRIPTION SERVICE displays which station you are on in form of text rather than digits. ie: 102.00fm = GALAXY102
Posted by Mr Miyagi
i still don't hear any hissing sounds, iv had my phone for a month now.
Posted by shahveer
| Quote: |
|
Help please anyone? Any ideas? Appreciate it. Thanks.
Posted by ramstad
Does anyone know when SW-R4CK003 is available on SEUS?
I have noticed that SEUS can be loaded from W810's Supportsite on S.E.
Posted by P1N3R
| Quote: |
|
Play a song and then turn it right down and listen to it, you can hear hissing in the background. Same on loudspeaker. Just try it. Its a W810i btw,
P1
Posted by nsbharad
I got my W810i last week. It's unlocked and runs R4CF002 firmware version.
My shortcuts are retained when I change the theme. I am however seeing a caller id problem. When I call a person in my contacts without using the area code, the contact is not pulled up in the call history or the display while I call.
Other than that I think my upgrade from the W800i was worthwhile.
Cheers!
Posted by isiahma
| Quote: |
|
it is available on SESU now (Hong Kong)..
http://www.sonyericsson.com/s[....]1&pid=10376&fid=21839&esi=true
[ This Message was edited by: isiahma on 2006-05-24 02:59 ]
Posted by procterdc
OK, I have a new W810, 2 days old and am running on R4CE012,
I am getting the LED flashing problem (although only seems to happen at night time - strange???)
I don't have any hissing playing mp3's. I also have an option on my phone to update over the air, although there is no update available yet.
Anyone come up with another way of getting rid of the LED problem??
Posted by scapevlocity
procterdc:
upgrade the FW.
Posted by procterdc
where? i have just tried SE, it says there is no available update
Posted by scapevlocity
what's your phone's region of origin?
[ This Message was edited by: scapevlocity on 2006-05-25 00:37 ]
Posted by BUFFBOY
still cant update yet for australia region.. WTF
Posted by ramstad
Do not work in Norway either!
I have tried to get an answer from SE, but as usual they say they don't know when a new update will come!
(I think they know!)
It's very iritating that it's takes so long time before the new SW appears on SEUS! If you go to a service-shop they have the newest one!
Posted by Stajlerboy
I want to update my firmware aswell.
I have the led problem..
It's kinda annoying.
Posted by P1N3R
Cant get it working in UK on O2 yet...oh dear...
Posted by procterdc
has everyone seen you can upgrade your firmware over the air. there is a setting on the phone itself. I've also set it to remind me once a month to check for updates.
Posted by jepherberich
posting (possible) rendering bug as a new thread...
Posted by jepherberich
for the post above: here
also, another thing i noticed while playing jc does texas. when you dont press anything for 5 or so secs, the screen blanks out. while this is not unique to the w810 (i remember the w600 doing the same thing, while playing worms fort 3d and waiting for the AI's turn to complete), but shouldnt it remain on when youre playing games/running a java app? or at least an option to enable/disable it?
Posted by P1N3R
What about unlimited messages? Is that possible with a W810i?
Posted by helen2006
hi, i av got fw R4CE012.
I av got a problem wi my earphone wen i plug it in it wont wrk but wen i turn my fone off then plug it in it wrks then i av 2 turn it off again so ht earphone r unplug.
I also cant use my WAP or MMS it say there is a error wen i av got all da setting for o2 network.
What can i do???????????
Has any1 got da same problem??????? n if u av PLEASE HELP ME!!!!!!!!!!!!!
PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Posted by orthodoc
Help! I bought my w810i a month ago, open line in the Philippines. Last night, I turned my phone off. This morning, when I was going to turn it on, all I got is a white screen and then, it turned off. The phone would not respond to the power button. I tried removing the battery several times but no response. I can't turn on my phone! Is there any solution for this problem? Thanks!
Posted by procterdc
umm...panic?!?
Posted by orthodoc
Yup! That's what I am doing now. It's a good thing I have an old cellphone that I can use for the meantime.
Posted by jepherberich
hahah.. what about try running it through SEUS. see if a firmware upgrade/refresh does the trick. otherwise you may have to take it to the store where you bought it from to get it reflashed via DVT
Posted by scuffs_guy
hi,
can u get the fancy flash (eg black with white icons) menus on an o2 branded w810?
thanks
Posted by aldoin
when they release new firm for europe, i´m sick of flash led going on and off :S
Posted by procterdc
mine only flashes after about 10 seconds, not as annoying as i thought it would be.
Posted by SilverFire
update sucsessful from R4CF002 to R4CK003
CDA10255/101 APAC (I'm in Beijing, China now)
O2 free to all networks and it seems not branded
Actually I don't have either the led or hissing problem. I did that purely for fun. And hopefully new firmware will bring me A2DP...
PS, the speaker on my phone is OK, enough loud for both MP3 or ringtone. However the only problem is the ringtone for message is not loud enough. And I cannot find the settings for that.
Posted by Sebby
FWIW, I've recently bought a W810i. It is a SIM-free handset (CDA 102494/4 EUROPE_2 customisation) with R4CE012 firmware. I just tried the SEUS and was told I have the latest firmware.
Posted by raf
Well, I don't know if its a bug but when i add a birthday in the phonebook in my W810i and add it to the calendar it won't show up if the year of birth is earlier then 1970. This problem didn't occur in my K750. I hope this will be fixed in the next firmware because i have some very old friends, born in the sixties, you know!
Posted by JWadie
i have recently updated my K750i with the aplication that you can get from the sony ericsson web site, but now wenever i open the lense cover i get a message saying " "Wrong camera driver version (0.9). Please update camera driver to 4.5 or later" what should i do, the only help that i can get sromn sony ericsson is to take it to a center which there isnt 1 in my area so i would have to send it through the post which will take 7-10 days, i cant wait that long i need it now because im meeting up with sum friends in a few days. can anyone plz plz plz plz help me?
Posted by seguy
Hi.
I have just received a new W810i Tuesday morning, and it had firmware R4CF002 (CHINA).
I played around with it and it did indeed have the LED flashing bug, and the loss of shortcut upon restarting bug.
The phones built in update service indicated I had the latest software already installed.
So I hooked up the phone to the SEUS web update, and it updated the software to R4CK003.
I can tell you all that with the updating to R4CK003, the problems with the LED bug, and the shortcut bug, have been resolved.
Posted by jepherberich
for some reason the shortcuts bug persists with my phone, already at R4CK003 (CHINA)
no news of new firmware yet? upping the cam version to 5.x, plus all other fixes. *i hope the rendering bug i posted here (which no one seemed interested in..bleh!) gets looked into as well. not overly critical, but very annoying*
Posted by McFlyH
Hi!
I found some bug . Phone not remember last state (mono /stereo) in radio mode
That's bad
[ This Message was edited by: McFlyH on 2006-05-31 15:45 ]
Posted by brotherwind
HELP!
Hi, I got a w810i last week branded vor vodafone. I tried to unbrand it using davinci client 15.94 with following files and OSD win98SE:
W810_R4CE012_MAIN_GENERIC_HN.DVT 13.606 kb
W810_R4CE012_FS_EU2.DVT 7.464 kb
BTW No other client version recognizes my phone: 15.6, 15.8, 15.95, 16.1, I tried this with the same result on a firewalled Win2000-PC. The respective message is allways:
Client Version 16.1
**** READING CID STARTED ****
Turn off the phone.
Hold "C" button and plug USB cable.
Phone attached!
Detected SonyEricsson: K750/D750/W800/W550/Z520/Z530.
Error: EaTEbS not recieved!
Flash Loader not accepted! Try to Recover phone before flashing.
Flash Loader not accepted
Execution Time - 00:00:35
Error: 0x005050
The unbranding process using client 15.94 stopped with following message well before any flashing happened:
Client Version 15.94
Turn off the phone.
Hold "C" button and plug USB cable.
Phone attached!
Detected SonyEricsson: K750/D750/W800/W550/Z520/Z530.
CsLoader Accepted Ok!
Status Ok, OTP Close, CID49, PAF1
IMEI: xxxxxx-00-xxxxxx
Loading Main File. Please wait...
File testing falied!
Execution Time - 00:00:06
Done!
Since then the phone is dead. It won't boot at all. The credit was nonetheless used up, though there happened no finalization.
Now I tried to repair it using the next credit but in vain:
Client Version 15.94
Please Give me GDFS File!
**** GDFS TOOL STARTED ****
Turn off the phone.
Hold "C" button and plug USB cable.
Phone attached!
Detected SonyEricsson:
K750/D750/W800/W550/Z520/Z530.
CsLoader Accepted Ok!
Status Ok, OTP Close, CID49, PAF1
IMEI: xxxxxx-00-xxxxxx
W810/Z530 recognized!
CsLoader Accepted Ok!
System Initialization. Please Wait...
Getting data from server...
Connection ok! Data recieving...
Sign 1 ok.
Sign 2 ok.
Writing GDFS. Please wait...
Getting data from server...
Connection ok! Data recieving...
Execution Time - 00:03:14
Error: 0x005679
The app stops at 93% completed no matter how long I wait.
Now I am very disappointed, contacted SElogs-support and posted on several boards. But untill now nobody could really help me!
Maybe you can!
Posted by pjw
R4CE012 here. I have a very irritating bug:
when a new event occurs (like a new sms, a missed call etc.) and you do not notice is straight away, the screens just blanks after a few seconds and gives no indication whatsoever that there is e.g. a new sms. I do not want to push any buttons to see if I might have received an sms, I want to see it straight away on the screen. Any solution to this? On my old k700, an envelope was displayed over the clock on the screensaver, but now you have to push a button to see the clock... stupid, stupid SE!
Posted by BUFFBOY
R4CK003 is released FINALLY
any from Australian Region with CDA102494/2 EU_2 can get this latest firmware from SEUS
[ This Message was edited by: BUFFBOY on 2006-06-02 11:15 ]
Posted by milkyjoe
Is the new firmware out in the UK yet??
Posted by Swanseajack
I've had my w810i for about 2 days, noticed while playing an album today that when you lock the keys with the walkman playing and press the pause key on the side it will stop fine, but when you press it again to start up again it goes back to first song on the album, seems to do this at random, very annoying.
I'm on Vodafone and useing R4CE012
Can't update as software says I have latest version blah blah etc.
[ This Message was edited by: Swanseajack on 2006-06-02 19:14 ]