Posted by Uncle Bob
Did a quick search on Esato, could not find any reference to it so just in case you don't know, an updated version is available from the SE website. It's 35 MB in size so dialup users need to take a day off to download.
I would assume that it is a correction to the "server Busy" issues we had with version 2.2.10
Here's the link
Posted by mwjdavies
Thanks for the heads up
Posted by Uncle Bob
Seeing as its a Bank Holiday today and I'm bored at home I tried this update again.
I was able to update my phone to R1AA008 after a lot of attempts with version 2.2.10, but when I tried this new SEUS version it updated my phone again from start to finish. I was able to connect on my first attempt and got no error messages.
So looks like SE corrected their mistakes
Posted by mcbuddha
i've installed 2.2.11b and it says "Incompatible Macromedia version bla bla". i've flash player 8.0.22.0. i don't have the previous versions (2.2.10, 1.9) installed. what should i do? pls help!
Posted by link14
| Quote: |
|
try to install the latest IE 7.0 beta sp1 and then install flash 8 ...see if it works for u also...
Posted by mcbuddha
IE? i don't know why i need IE, but i'll try it...and flash 8 is flash player 8 or flash MX 8 or what? (i have all of them installed...)
Posted by hyperken
first you need to uninstall your previous seus update
second you need to uncheck your phone connection link
after that turn off your phone , remove your sim card, reinsert your battery!
Then you will be able to update it successfully!!!
Dont forget to do a back up and have your phone fully charged before you update it!!
Good luck
Posted by mcbuddha
@hyperken:
i know what i have to do (i have updated my phone before with SEUS, and it worked right), but the program don't even start running...it says i have "incompatible flash"...
Posted by mathios
go here and download the latest flashplayer www.macromedia.com
Posted by mcbuddha
i have the latest flash player (8.0.22.0) as you can see above. but i did download it from here. and it still not work, the error is the same.
Posted by debbeh
hi you all,
I have tried updating my W800i with the new SEUS App 2.11b but whenever I get to the point where I press and hold the C then connect my USB after that my phone will start and ask for the Sim card. So what am I doing wrong?
Please advise,
Thank you
Posted by mcbuddha
download the SEUS drivers from here
Posted by Uncle Bob
@mcbuddha
Sounds like you're using Firefox. Ihad a similar problem with Flashplayer. Use Internet Explorer to install it, also if you use the Flashblock extension; disable it.
Posted by happykhan
While trying to update my F/W i got the "screipt error" message even with SEUSII v2.2b.
SO i HARD master reseted my phone and now what i get is the "u have the latest F/W on ur phone" message.
WHAT THE f**k SE SERVICE CENTER IS DOING?
What should i do?
any idea?
Posted by jorge2jr
I've just updated the firmware of my k750i and the software it's great buy with this version of SEUS Can I update the firmware of an t616??
Posted by mcbuddha
@Uncle Bob
where should i use the web browser? i downloaded an exe, and installed it offline.
anyway, you're right, i'm using FF (1.5)
so, how can i install it with IE?
Posted by Uncle Bob
@mcbuddha
On the Macromedia site it detects your browser. With IE you install directly, with FF you download the installation setup.
look at these:
Posted by mcbuddha
i've installed, it says it's succesfully installed, but the SEUS II still terminate with the same error...
Posted by mathios
has anyone updated a p910 or a p900,if yes can you please post the software versions that they got. (only unbranded phones)
Posted by spirix
Hey, I have a V600i with a data cable- I cannot get the SEUS to install the USB flash drivers. I have tried holding down C and insterting the cable, that didn't work. Then holding down C and inserting the cable and turning on the phone still holding down C made windows recognise it as a flash device. I installed the drivers from the SEUS folder, but SEUS still gives me the 'no deskstand' error message! I do not understand what I am doing wrong- any help would be greatly appreciated! Thanks!
Posted by mcbuddha
think i'll wait the next version...it has got too much bad reputation -- and it still not work...
Posted by seguy
| Quote: |
|
Make sure you have the sim card out, phone off, hold down the "c" key, connect cable, and do not let up on the "c" key until after you have plugged in the USB cable, and the program will tell you to let go of the "c" button. I had problems with this too.
Posted by mcbuddha
i don't know what did i do, but it's working...almost...it starts, but there's another error: "Error downloading virtual card blah blah..."
anyone, idea?
Posted by mcbuddha
i reinstalled it, and it's good, working right. i updated my d750i, evrything was OK, but when i looked at the SW info in my phone, it says i have SW R1N035. the only problem is, that i had this version before...so it didn't do a thing with my cell. maybe, there's no new SW for d750i... (but i flashed the R1N035 from R1002 with the SEUS 1.19...)
how should i know if there will be a new SW for my d750i?
Posted by eNzO-VVTi
I am waiting for SE to release the firmware for my old T616... lol
Posted by optiplex
| Quote: |
|
AFAIK D750s are made exclusively for T-Mobile, right ? Then you might have to wait until SE releases R1AA008 for T-Mobile...
Posted by mcbuddha
@optiplex
yes, you're right.
Posted by link14
thnx for the link
Posted by macktv
I have a v600i and plan to get it unlocked, will debranding it unlock it as well as get ride of the Voda software or will I have to flash it and then go and unlock it?
Posted by macktv
Does no one know the answer to the above question?
Posted by Geezay
Guys, I have an absolutely slow connection - dial up, and it would take me forever to download the new update service. Could anyone be so kind as to send me the file via e-mail? The add to use is godwin.kanongovere@zw.pwc.com
Thanks!
Posted by bounce550
Tried updating my w550i. did everything right, held down the "C" button & the only thing to happen was that my PC restarted!!!
this happen to anyone else??
Posted by thnov
For all people with the Flash-problem:
http://fpdownload.macromedia.[....]eta/install_flash_player_8.msi
Install this file and you'll be good.
I had latest flash player (8.0.22) but only installed for use with Firefox but the problem wen't away after installing that MSI.
There is absolutely no need to change Internet Explorer version!
Posted by Phoebus
I know that one of the requirements for the Update Service is the DSS-25 deskstand. My question is this: Will the DSS-20 work as well?
Thanks.
Phoebus
[ This Message was edited by: Phoebus on 2006-01-11 10:37 ]
Posted by batesie
any W900 support yet?
Posted by Tervel
Not sure if this is addressed anywhere, but I've read this thread as well as the last one relating to the new version of SEUS and haven't seen my issue listed.
When I doubleclick on the icon Update Service, I get an hour glass for less than a second and then NOTHING!
I've tried this on 3 different computers, one of which is brand new with WinXP SP2 and the latest Macromedia Flash Player and I get no different results... Any ideas?
Posted by mada_152
[ This Message was edited by: mada_152 on 2006-04-01 22:18 ]
Posted by c_vignesh
The same problem with SEUS 2.2.13.7 ...when i double click the icon ...nothing happens what to do
Posted by Intratech
| Quote: |
|
Had this problem as well. If you've installed the latest Flash player from Adobe then you need to run the following "regsvr32.exe C:\\WINDOWS\\system32\\Macromed\\Flash\\Flash9.ocx" without the quotes for windows to recognise it.
Posted by denedene
Hi!
Tried updating my K800i phone and same "flash incompatibility appeared".
Tried a couple of stuff and luckily I was able to make mine work. Hopefully, this will work with you:
1. Go to c:\Windows\System32\Macromed\Flash\
2. Double click on / Run "FlashUtil9b.exe" (in my case i found two flashutil9a & flashutil9b) ---
a. Click on "Install Now"
b. after 1.1mb of download
"The Adobe Flash Player update completed successfully.
The new version will be available when you restart your system."
3. Restart your PC.
4. Run "update software"
Pray that it will work.
*Note: you should have internet connection for flash to update.
[ This Message was edited by: denedene on 2007-03-20 07:00 ]
Posted by antichrist
On 2005-12-28 17:38:42, happykhan wrote:
While trying to update my F/W i got the "screipt error" message even with SEUSII v2.2b.
SO i HARD master reseted my phone and now what i get is the "u have the latest F/W on ur phone" message.
WHAT THE f**k SE SERVICE CENTER IS DOING?
What should i do?
any idea?
if you have the latest firmware, what do you want them to say?
Posted by Benfrain
On 2006-01-10 20:19:55, thnov wrote:
For all people with the Flash-problem:
http://fpdownload.macromedia.[....]eta/install_flash_player_8.msi
Install this file and you'll be good.
I had latest flash player (8.0.22) but only installed for use with Firefox but the problem wen't away after installing that MSI.
There is absolutely no need to change Internet Explorer version!
Bless you that man - Flash problem was driving me nuts!