Welcome to Esato.com




A handy little Sony Ericsson tip!

Click to view updated thread with images


Posted by aryayush
Hello!
I bet many of you are irritated that in Sony Ericsson phones, when you connect the handset and a call comes in, the ringtone is played from the phone's on-board speakers and not through the earphones. However, you can change that. Simply follow the few steps below and you are all set:

Go to: Menu >> Settings >> General >> Profiles >> Handsfree (More >> View and edit) >> Silent Mode >> On >> C (back) >> Accessories >> Portable h-free

Done! Now, whenever you plug in the handsfree, the phone will automatically switch it's profile to 'Handsfree' and the 'Silent Mode' will be activated. Then, the phone will vibrate and ring in your ear when a call comes in. When you remove the handsfree, the phone will again switch back to the previous profile.
Hope you guys found this quite useful!
See ya!

[ This Message was edited by: aryayush on 2005-12-19 11:18 ]


Posted by batesie
i must admit thats a handy tip! i use it all the time with my bluetooth headset and used to use it with my wired headsets too...

Posted by wrecked_porsche
Yeah, I use this same method all the time too. I just set my handsfree profile to silent and the call can be heard on the hedphones.

Posted by patronrx
When u want it just press n hold # button. It's easier i think.And u don't need change handsfree profile.

Posted by marlonski
@aryayush, nice tip, thanks



Posted by *Jojo*
It's possible . . . yeah !

Posted by simply__me
wow, thanks aryayush.

I never knew about this and I'm usually worried that my fone might ring when im listening in quiet places.


Posted by blackspot
Quote:

On 2006-01-06 00:51:11, patronrx wrote:
When u want it just press n hold # button. It's easier i think.And u don't need change handsfree profile.


@aryayush is talking about plugging in the handsfree and making the ring come out through the headphones instead of the external speakers (which is default). Plugging in the handsfree automatically switches profile so there's no need to manually switch profile. Pressing the # only switches to silent mode even if you're not using the handsfree kit.

Posted by f_sweden
If u activate silent mode by pressing # when handsfree is plugged in, (this will make the ringtone come trough the earpice) the phone will remember that the next time u plug in handsfree.
When unplugged it will go back to the setting u had before.

[ This Message was edited by: f_sweden on 2006-01-06 11:27 ]

Posted by Salisbury_Steak
I dont switch the phone to silent when on handsfree for the reason that I dont hear who is calling.

I have voice dial and the phone plays their names when they call me. But the phone doesn't do that when it is on silent.

Posted by marlonski
The ring cannot be heard through the headphones by default in handsfree mode on my W800.

By editing the profile 'just the once', to silent mode the ring is then actually heard through the headphones everytime you have the handsfree set on.

Posted by pblocal
thanks,

I changed mine and like it alot better this way.

Posted by mcrosser
great!! it works with my T630, I hoped it would work when playing pagmes but no, yet the good thing is that the camera shutter sound is heard through the hands free, wich is good could come in handy for those K-series users who can't turn off the shutter sound.

Posted by mcrosser
i've tried listening to an AMR file and it sound horrible with the speakers, but with the hands free it sounds quite nice

Posted by race24
thanks for the tip there man. i changed my setting and it's great!

Posted by Spindizzy
Hey all, new here but have been lurking and learning alot over the past couple of years.

Anyhow, alas I'm worthy the forums as I'm the proud owner of a W810. Absolutely love it. However I find it odd that my phone doesn't switch to a handsfree profile when plugged in. Just a headphone icon appears but no handsfree. Whats the deal?

Posted by jepherberich
@Spindizzy: since the k750, seemed to want its users to manually associate certain profiles with its accessories. to do this with the w810: Menu > Settings > Profiles > scroll down to 'Handsfree' > More > View and edit > Accessories > New accessory Portable h-free

to the original poster: very spiffy! ive been going at wits end trying to get that ringtone to play through the headset. i didnt realize putting the phone in silent mode is the way to go

Posted by Spindizzy
Aaaaaaahh!

Thankyou, Thankyou. And now my ringtone comes through the headphones as well.


Woo Hoo!

Posted by iazybandit
Sorry to bring back a 2-3 month old post but thanks for the tip OP (original poster).

I have a question though (instead of flooding thread with new post), I have SE HBH-GV435 bluetooth headset. How do I get this to automatically switch my profile? I have a w810i.

*EDIT*
Ok, nevermind. I got the handsfree profile to pop up when it connects to my bluetooth headset. Not only did I have to choose the "Portable h-free" (for wired headset) but I had to choose "Accessory 11 0" as well.

_________________
Webmaster - The PSP Review Site: Your one stop access to PSP accessory reviews
eBay Auctions

[ This Message was edited by: iazybandit on 2006-10-16 21:38 ]

Posted by ryansprague
giddy up, workz well !!!!!!!!!!!1

Posted by Prom1
@Spindizzy, welcome to the W810 Clan club here on Esato Forums.

> I'm also a proud owner of the W810 and I truly love it, so much so that my wife calls it the "mistress"!

This is some the quality of function that Ericsson was known for, and crossed over to SE products. I started a thread a few days ago that only 1 person commented on; and I was hoping more functional yet elegant implementation like this could be seen in future renditions of the calendar app in SE phones.

To the OP you have NO idea how much many Esato members & SE fans alike have been looking for this feature. Incredible post.

MODS! Can this be either made a sticky or updated in ALL recent model SE fone tips & tricks, please?!

Posted by abbafan1972
I have the W810i and love it too!

Posted by GlumReaper
Great tip, thanks

Posted by A-w850i
Nice tip but I won't be using it - I don't want my ringtone blaring through speakers (not the phone speakers).

Posted by Prom1

On 2005-12-19 12:06:56, aryayush wrote:
Hello!
I bet many of you are irritated that in Sony Ericsson phones, when you connect the handset and a call comes in, the ringtone is played from the phone's on-board speakers and not through the earphones. However, you can change that. Simply follow the few steps below and you are all set:

Go to: Menu >> Settings >> General >> Profiles >> Handsfree (More >> View and edit) >> Silent Mode >> On >> C (back) >> Accessories >> Portable h-free

Done! Now, whenever you plug in the handsfree, the phone will automatically switch it's profile to 'Handsfree' and the 'Silent Mode' will be activated. Then, the phone will vibrate and ring in your ear when a call comes in. When you remove the handsfree, the phone will again switch back to the previous profile.
Hope you guys found this quite useful!
See ya!

[ This Message was edited by: aryayush on 2005-12-19 11:18 ]


Unfortunately this tip is not working for my K850i, and I'm not sure why? I do see a new icon (possibly the handsfree icon when my HPM-75's are plugged in though, but hte phones external speakers still sound off the ringtone on an incoming call.

Posted by SCre8or
thanx,....but what if the BT headset has a ring tone itself :S ?


Posted by altemyr

On 2008-04-21 04:26:24, Prom1 wrote:

:

Unfortunately this tip is not working for my K850i, and I'm not sure why? I do see a new icon (possibly the handsfree icon when my HPM-75's are plugged in though, but hte phones external speakers still sound off the ringtone on an incoming call.



I have noticed that this feature stopped functioning after a firmware upgrade of my K800i. After the next upgrade, it started to function again. With the current version I use, (R1KG001), it works, so my tip is that you should try to upgrade the firmware on your K850i, and then it may work.

Posted by deluded
I'd like to know how to get this to work on my K770i with my bluetooth headset. I can do it just fine with my HPM-82, but I can't do the same with my bluetooth headset. It'll be great if I could get it to work with my bluetooth headset. Thanks!

Posted by jojosiscar
thanks for the tip

Posted by XIUYAN1
Although two years, but I must say thank you

Posted by guyfreelance
nice tip, thanks



Click to view updated thread with images


© Esato.com - From the Esato mobile phone discussion forum