Posted by marvel2k5
So finally we can convert our k750 babes to w800 with RED firmwares!!!! I'm just waiting for an america2 language pack to try this shit out... actually maybe i try even if they dont have one
anyone already done the conversion?
Posted by pennybridge
trying it now.... although when i go to flash it, it says "phone connected" but it won't go past 0%....
hmmmm
Posted by Hajaz
flashing it now
Posted by Adam18
works fine, did it with my TMS 2 in 1 cable. Took less than 30 mins
Posted by Hajaz
worked with my dcu60
i aplied a w800 cda too.
[ This Message was edited by: Hajaz on 2005-10-09 13:38 ]
Posted by Adam18
Yeh i did the same too...Davinci could do to update the program so it includes the W800 CDA's otherwise people will be applying K750's
Posted by BUFFBOY
what CDA do i use for this W800i update ??
Posted by Hajaz
CDA102425/25 - W800i Claro Claro Brazil
CDA102425/33 - W800i Digicell Digicell MMC Venezuela
CDA102425/36 - W800i E+ E+ Germany
CDA102430/105 - W800i Generic Generic Argentina, Latin America
CDA102425/40 R1A W800i Generic EUROPE_2 Generic Australia
CDA102425/4 - W800i Generic Generic Belgium
CDA102430/14 - W800i Generic Generic Chile
CDA102425/3 - W800i Generic Generic China
CDA102430/2 - W800i Generic Generic Czech rep
CDA102425/16 - W800i Generic Generic France
CDA102430/10 - W800i Generic EUROPE_2 Generic Germany, South Africa
CDA102425/39 - W800i Generic Generic Greece
CDA102425/15 - W800i Generic Generic Hong Kong
CDA102430/4 - W800i Generic Generic Hungary
CDA102430/6 - W800i Generic Generic India, Morocco, UAE
CDA102430/101 - W800i Generic Generic Indonesia; Phillippines Vietnam; Singapore Malaysia
CDA102425/5 - W800i Generic Generic Italy
CDA102425/17 - W800i Generic Generic Netherlands
CDA102430/1 - W800i Generic EMEA_1 Generic Poland
CDA102430/9 - W800i Generic Generic Portugal
CDA102425/38 - W800i Generic Generic Russia
CDA102430/12 - W800i Generic Generic SE / FI; DK/NO
CDA102425/23 - W800i Generic Generic Spain
CDA102430/13 - W800i Generic Generic Switzerland
CDA102425/7 - W800i Generic Generic Taiwan
CDA102430/102 - W800i Generic Generic Thailand
CDA102425/37 - W800i Generic Generic Turkey
CDA102425/6 - W800i Generic Generic UK
CDA102425/55 - W800i Generic Generic USA
CDA102425/47 - W800i KPN KPN Netherlands
CDA102425/8 - W800i Mobilkom Mobilkom Austria
CDA102425/9 - W800i O2 O2 UK
CDA102425/32 - W800i Optus Optus Australia
CDA102425/46 - W800i Orange Orange Netherlands
CDA102425/22 - W800i Orange Orange Switzerland
CDA102425/10 - W800i Orange Orange UK
CDA102425/42 - W800i SingTel SingTel Mobile Singapore
CDA102425/21 - W800i Sunrise Sunrise Austria
CDA102425/11 - W800i Swisscom Swisscom Switzerland
CDA102425/61 - W800i Telefonica Telefonica Mexico
CDA102425/31 - W800i Telstra Telstra Australia
CDA102425/20 - W800i TIM TIM Brazil
CDA102425/66 - W800i T-Mobile T-Mobile Austria
CDA102425/43 - W800i T-Mobile T-Mobile UK
CDA102425/19 - W800i Vodacom Vodacom South Africa
CDA102425/14 - W800i Vodafone Vodafone Germany
CDA102425/35 - W800i Vodafone Vodafone Sweden
CDA102425/13 - W800i Vodafone Vodafone UK
CDA102430/106 R16A W800i Generic AMERICA_1
CDA102430/11 - W800i Generic EUROPE_3
CDA102430/12 - W800i Generic EUROPE_4
CDA102430/13 R2A W800i Generic EUROPE_5
CDA102430/2 - W800i Generic EMEA_2
CDA102430/3 - W800i Generic EMEA_3
CDA102430/4 - W800i Generic EMEA_4
CDA102430/5 - W800i Generic EMEA_5
CDA102430/6 - W800i Generic EMEA_6
CDA102430/7 - W800i Generic EMEA_7
CDA102430/8 - W800i Generic EMEA_8
CDA102430/9 - W800i Generic EUROPE_1
Posted by Hajaz
i tried it on seus and it didnt detect it (eu3 w800 firmware and w800 generic belgium cda) . i must have overlooked something :/
Posted by BUFFBOY
http://www.esato.com/board/viewtopic.php?topic=105835
Posted by gseth
Updated my k750i to w800.......
Posted by CyberVisitor
| Quote: |
|
Doesn't matter if a K750 user enters a correct CDA. SEUS will be of no use for those converting from K750 to W800...
http://www.esato.com/board/viewtopic.php?topic=105835#post1449108
By the way, it has nothing to do with DaVinci... It's not they're fault! SEUS does a check and will see that the phone is a K750 even if it's flashed with W800 firmware.
[ This Message was edited by: CyberVisitor on 2005-10-09 17:09 ]
Posted by Hajaz
how can seus tell?
according to davinci developer it doesnt check imei iirc
Posted by CyberVisitor
| Quote: |
|
An easy way to find out is for a K750 owner who has converted to a W800 to try using SEUS. If everything is fine, then he should get a message saying the phone already has the latest firmware. If I'm correct, SEUS will say your phone is not allowed to use SEUS... Well, what message did you get
Posted by Hajaz
i got a message about my operator not allowing this service, witch is usually related to locked phones and cda number
( i got the same message when i still had k750 firmware but the wrong cda, switching cda fixed that)
[ This Message was edited by: Hajaz on 2005-10-09 17:32 ]
Posted by bcarty1
hi can somone please post the link to davinci site thanks
Posted by CyberVisitor
| Quote: |
|
Posted by hragsarkissian
| Quote: |
|
Among all of these CDAS which one is working with SEUS, because i have a W800i which never worked with SEUS, so i used Davinici by mistake i updated with the CDA of a K750. SO i need the CDA of the w800 that works with SEUS or alread have the R1N on SEUS .
Thank you.
Do i need another credit to change the CDA only ?
Posted by Hajaz
yeah, you also need to reflash the fs to change cda.
im not sure witch of these cdas work with seus. maybe its bet to check with some w800 owners
Posted by hragsarkissian
And when i put the CDA manually, do i have to write next to the CDA number EUROPE 1 for exemple ?
[ This Message was edited by: hragsarkissian on 2005-10-09 18:21 ]
Posted by marvel2k5
afaik, u should enter just the initial string, e.g. "CDA102430/6" without quotes of course...
[ This Message was edited by: marvel2k5 on 2005-10-09 18:27 ]
Posted by hragsarkissian
Is there a way to test if its compatible with SEUS without finalizing the phone. Then if it works with the correct CDA, we will use the finalization thru davinci ???
Posted by hragsarkissian
Flashed with davinci again with CDA CDA102430/9 - W800i Generic EUROPE_1
and FS MAIN EU1.
Tried it with SEUS, it says now , Your device is already up to date.
Wohooo finally.
No more message saying my operator doesnt aproove.
Posted by CyberVisitor
| Quote: |
|
Is your phone a W800 or converted K750?
Posted by Adam18
Mines the same as his and mine is a converted K750 and i still get the :
Your device is not permitted to use this service
Your operator does not approve the use of this service with this device.
We look forward to assisting you again soon.
Thank you for using the Sony Ericsson Update Service!
Posted by xanataus
hragsarkissian
For the benefit of everyone else can you please confirm
1) If you are updating from K750->W800 or W800->W800
2) If you can still use SEUS after the update
Thanks
Xan
Posted by 619
| Quote: |
|
1. yes
2. depends on the cda
Posted by hragsarkissian
| Quote: |
|
Mine was a W800 unbranded, and i had the problem with SEUS "operator does not aproove" after i flashed with the CDA /9 EU1.
SEUS tells me now Your device is already up to date.
So it works now with SEUS.
I repeat my phone was a W800i America 1.
Posted by Echav
with that firmware and cda do you get the shutter sound on the camera when its on silent mode?
I want to update my phone, but i hate the stupid shutter sound, right now i have the america_1 as you did before.
THanks
Posted by grca73
| Quote: | |||
| |||
no depends on imei too.
k750-->w800 several different cda's tried, ones that were reported working, seus does not allow.
so only real w800 upgraedable
Posted by hragsarkissian
| Quote: |
|
Yes with EUROPE 1, you get rid of the shutter sound when its on silent mode. Just noticed it. lool. I love my W800 now.
Posted by seamus5
Are there any customisations for the W800 that stops the middle button being taken over by the walkman function?
I want to keep the shortcut launch button there as it is much more powerfull than assining it to up on the joystick.
Posted by Naamloos
Who's phone crashes randomly after flashing the k750i with the red w800 r1n035 firmware?
Posted by BUFFBOY
| Quote: |
|
my 750 with that firmware hasnt crashed yet..
and my w800i hasnt crashed yet..
i think it depends on how u flashed ur phone and if u encountered any errors during the process.
Posted by RyaN
Has anyone with this CDA - CDA102425/6 - W800i Generic Generic UK, or for that matter anyone with a UK W800, flashed using Davinci yet, using the generic europe cda - CDA102430/9 - W800i Generic EUROPE_1, as this CDA appears to be ok using SEUS in the future (following hragsarkissian's successful flashing) Just wanted to ask as i have a spare davinci credit knocking about, and may attempt this later. Anyone's comments are welcome...
Posted by achill2uk
hi guys just wondering how many credits i need 2 flash my k750i into a w800i phone plz anyone thanx for help as i wanna do it?
Posted by Hajaz
you need 1 credit
| Quote: |
|
hragsarkissians phone is a genuine w800,
k750 flashed to w800 wont work on seus because of imei
Posted by RyaN
| Quote: |
|
noted from the other thread matey, thanks
Posted by TYU
Now that AMERICA 2 is up, anyone knows which CDA should i use to update my 750i to w800 w/ america2????
Posted by OzzBoz
Hey Guys where can I get this new W800 red file? I'm using davinci's latest client but the files listed for W800 are older and when I refresh I get an FTP connection time out? I cannot ping FTP site at 64.92.166.206 (what client says it's trying to connect to)
There used to be an HTTP alternative has this gone?
Posted by CyberVisitor
| Quote: |
|
Click "Update settings" before downloading the new file list
Posted by DynaMight
I flashed my K750 to a W800 earlier today, Got very worried when it couldnt connect to the davinci site!! Phone wouldnt work properly so I reflashed and luckily it worked after that. phew!
Posted by Maelstrom
Any of you guys go K750 R1L -> W800 R1N?
If so, does the camera work?
I've been told that if you go straight across instead of K750 R1L->R1N->W800 R1N then the camera will stop working.
If anyone can confirm/deny it would be greatly appreciated.
Cheers fellas
Posted by AndiTails
I've just gone from R1L to R1N W800i through DaVinci, and its working perfectly - including the camera
Took 8 mins 42 secs to do the flashing too - a lot faster than TotalMultiServer (which is nearer 30 mins!)
(I have Cruiser cable though - didn't use DCU-60)
[ This Message was edited by: AndiTails on 2005-10-10 23:36 ]
Posted by marvel2k5
| Quote: |
|
two things:
1) the america2 in davinci's server is the R1L002 and if u use it your camera won't function anymore... that's because r1l002 has camera version 4.4., what language do u want? portuguese? if so, u can use the europe1, althought it's portugal portuguese can do the job meanwhile or u could just wait for the correct r1n035 file...
2) once u convert your k750i into a w800i u wont be able o use SEUS anymore because it checks both cda and imei to validate your access, as said many times before...
I've just done the conversion with europe1 files... i can assure u, it's worth
Posted by Malachi Constant
I did mine yesterday, and it worked great! i went from k750r1n to w800r1n, no probs whatsoever, couldnt be happier!
Posted by tangokat
Is it possible to use SEUS if I update my K750i to W800i but then back to K750i using the same CDA?
Which CDA should I use when updating to W800I (W800_R1N035_FS_EU4)?
CDA102430/12 - W800i Generic EUROPE_4
or
CDA102430/12 - W800i Generic Generic SE / FI; DK/NO
i'm from denmark
[ This Message was edited by: tangokat on 2005-10-11 09:04 ]
Posted by RSkillz
Does the Europe_1 have the Dutch Writing language for SMS? Or do I have to go for the Europe_3?
I want an english interface, but need the Dutch writing language.
Can anybody tell me which versions disable the shutter-sound? (I know Europe_1 version does)
[ This Message was edited by: RSkillz on 2005-10-11 10:23 ]
Posted by Adam18
I have Europe 1 and it doesnt have Dutch language.
Posted by RSkillz
| Quote: |
|
Thanks, guess I'll go for the Europe_3 then