Posted by JKay
Hi
I just updated my K750i to R1N035 here in Denmark.
And it now says:
R1N035
prgCXC 125952_EU_1_CL
Camera
Current: 4.5
Works fine so far... Didn't even reset my shortcuts as it used to do after an update
Regards,
Jkay
Posted by bbaev
great! as i've never done that before (bought my precious a week ago), can you please tell me how long it takes to update?
10x in advance!
Posted by senninha
unfortunately EU 3 still isn't ready... grrrrr!!!!!
Posted by bbaev
anyone answer me?
sorry for that question, but as I only use internet at work, I gotta know...
Posted by NeySlim
The update is at maximum 15-20 minutes long.
It worked perfectly for me (EU1).
Posted by beeb
so an unbranded EU_1 in uk now works does it?
Posted by bbaev
10x NeySlim!!!
Posted by bbaev
yet a problem arises:
K750i's update is not available on SE's Bulgarian site. when I go to global support and want to start the update (afer clearing the checklist with preparations), nothing happens!!!!
the page just stays blank.
what shall I do?
my firmware is
R1L002
prgCXC125955_HONG_KONG_CL R1L002
Posted by Del
All Im getting at the moment is the 'Uh ho there has been a problem' page
Posted by bbaev
Yes, I get either that or blank page...
what does that mean?[ This Message was edited by: bbaev on 2005-09-14 10:17 ]
Posted by Firefreak
| Quote: |
|
Doesn't matter which page you run the SEUS from... I updated my EU1 one from the UK site the last time even though I'm from sweden and it worked out just fine... it finds the right firmware anyway... the UK site was a few hours ahead for some reason...
Posted by Del
Well I just tried it again and it still only lets me get R1L
Posted by bbaev
10x for the reply, Firefreak, but I guessed that and tried even at SE's Hong Kong website, but still the same thing... maybe the servers are overloaded at the moment, or something, I dont' know...
Will be trying later, though
Posted by NeySlim
Yeah, servers are overloaded, but it worked for me (after 5 tries) on the french support page, try this one. If you got a blank page, wait for the java application launches, and check if it's not launched in background.
Posted by screwed
hmm mine hangs on 'Intisalising Device'. i am trying from ME servers.
Posted by Del
Well Im still only getting R1L, it will not download the new firmware.
Posted by bbaev
at least you get something...
Posted by NeySlim
Sometimes the java app hangs up, try to close and reopen your Windows session, it worked for me.
Posted by bbaev
I don't know... no java app even tends to start... I will try, though, thanx mate!
Posted by NeySlim
Are you sure you have the JRE installed ? If not, take it here http://javashoplm.sun.com/ECo[....]SiteId=JSC&TransactionId=noreg
And maybe your browser doesn't allow to run java apps.
[ This Message was edited by: NeySlim on 2005-09-14 11:04 ]
Posted by victorh017
| Quote: |
|
You NEED to have JAVA installed on your computer. After that you will be able to do the update and continue to the next page instead of getting the blank one.
Posted by bbaev
hah, I though I had one installed, stupido me!
Thanx a lot, you were very helpful. Now I'm downloading Java and then I'll report what happened!
Cheers!
Posted by tagheuer
Everything 's fine for me ,upgraded successfully
Posted by bbaev
bla-bla-bla, almost made it... turned out it has just reinstalled my old R1L002 firmware
[ This Message was edited by: bbaev on 2005-09-14 12:57 ]
Posted by screwed
No updates for UAE too. I am on Middleast server.
it still shows that my device is up-to-date.
My update checking wld hang on Intialsing Device unless i dont connect my phone with SE File Manager.
Posted by bbaev
Anyone with HongKong version of software been able to upgrade yet?
Posted by ajsimeon
still a no go for me....EU_1 EMEA_6
Posted by rambalu80
I read on another thread that one member updated EUROPE_3, but his CDA was different than mine. Mine is EUROPE_3, CDA102338/48 and I am not able to upgrade. My phone is unlocked and unbranded too.
[ This Message was edited by: rambalu80 on 2005-09-14 16:24 ]
Posted by ajsimeon
mine is now updating...good luck to everybody else
hmmm...mine just updated but it went from 48% to 100% in like 1 second....everybody else experience that?
[ This Message was edited by: ajsimeon on 2005-09-14 16:23 ]
Posted by JT
Yup most of us have experienced that. I think its fairly normal anyway. Are you happy with the new firmware?
Posted by mattdonut
i cant update yet
im on orange in the uk
sitting waiting!!!!!! tapping my fingers!!!
anyone on orange updated yet??
Posted by SL33PYH34D
Finally managed to get my UK SIM free EU_1/EUROPE_2 updated to R1N035 after the update service having insisted on giving me R1L over and over again (tried it about five or six times in all).
Update went smoothly without any problems at all - but then I'm fairly unique in that I've never had any problems with the update service with any SE handsets.
I do think its pretty annoying that even some of the branded handsets appear to have been getting R1N before SIM free versions though.
Posted by ajsimeon
JT, right now I'm loving it. Better reception in my room and better video! This firmware rocks.
Posted by JT
Yeah I feel the same way, reception bar is always on maximum. Thing I like the most is that the mp3's sound clearer than before.
Looks like Sony finally did something right for a change.
Posted by ajsimeon
the only thing i see that i don't remember seeing is in the camera. When i switch from picture to video there's a red screen that blinks before the transition. It's like not even a second and not even a big problem but it's there.
Posted by kup
R1L002
prgCXC125952_EU_1_CL
That is my firmware version, o2 UK and I still can't update, even though it matches the same as above posters who could! Why?
Posted by screwed
Oh yes!!! i just updated my FW to R1N!! i used the Middle East and North Africa EN servers.
cant really say abt video right now 'cause its night time over here. i managed a picture though..of my dirty key board.
The screen looks much better. more sharper.
will let u knw in the morning!
Posted by Phildon008
I heard a lot of esatonians trying to update to this
new SE f/w and a lot of them saying that updating stops when
it reached 40% or 50%. Some are saying that after the update,
the camera doesn't work anymore.
I'll stick and wait to my R1L002 for now
Posted by bbaev
and that's what I intend to do as well!
Posted by Anger
My phone update was successful, I did it yesterday. No problem at all and no red screen while switching from photo to movie. And yes the update just jumped from 52% to 100% but worked, so I guess it is just somthing wrong with the progression bar, not with the firmware itself.
Movies look sharper, photos are just the same in good light condition, better in dark light condition. Just to do a long story short, R1N035 kicks ass!
Posted by Fabio 182
Hi All,
I use DaVinci to flash my phone to CDA 102337/10 from 102338/55 as I read on this forum that this will allow it to update via SEUS. It flashed successfully however when I have a look at my Service Info it is still coming up with the old CDA. This brings me to believe that either DaVinci is a crock or that the CDA 'On Screen' doesnt change.
Any thoughts?
P.S. It still wont update to R1N via SEUS...wtf?